Reviews Thermal Runaway Protection Modules

Hoodiess C127 Sentry RC Helicopter with 2 Batteries 1080P 90 Degrees Rotable HD Camera 4 Channel RC Heli Grey

  • (Shipped from NJ and will be delivered in 3-7 days) Aileronless design, the propeller is designed based on the principle of aerodynamics to provide....
  • Optical flow positioning, stable flight. 6G mode, using 6-axis gyroscope, flight stability, especially suitable for beginners to fly..
  • Modular battery, intelligent power management system, power indicator, easy and fast installation, effective battery protection, longer service life..
  • Low voltage alarm, locked rotor protection, runaway protection, large and small rudder volume conversion, one-key take-off, one-key landing and other....
  • Locked rotor protection, runaway protection, large and small rudder volume conversion, one-key take-off, one-key landing and other functions.
Check Stock

BIGTREETECH SKR Pro v1.2 32-bit Motherboard high-Frequency 3D Printer Control Board Support TMC5160 TMC2208 TMC2130 TFT28 TFT32 TFT35 12864LCD ect.

  • Super Quiet. Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 & Ender 3....
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled..
  • Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord.....
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem..
  • Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical....
Check Stock

Creality Ender 3 v2 New Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5 3D Printer

  • Super Quiet. Compatible with Creality Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 v2. If....
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled..
  • Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord.....
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem..
  • Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical....
Check Stock

Furnace Ignitor Igniter Directly Replaces Rheem 62-22868-02

  • Made from high-purity recrystallized silicon carbide (crystar) which combines physical and thermal strength with stable electrical properties.
  • Designed to reach ignition temperature(s) within 17 seconds.
  • Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity.
  • Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection.
  • Operate at 120 vac. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120 vac..
Check Stock

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board

  • Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
  • Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
  • This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Check Stock

LLPT Double Sided Thermal Tape Strong Adhesive Multiple 1.2 Inches x 108 Feet for Electronic Components LED Strips Heat Sinks(TC128)

  • LLPT-TAPES: LLPT produces various tapes for industrial & commercial use with ideal sizes & thickness based on the desires of users. LLPT is dedicated to provide high utility on the product with competitive price with great packing protection during transition. Search LLPT-TAPES on Amazon for other tapes like PET Repair Tape, Yellow Woodworking Tape, Aluminum Foil Tape, PE Foam Tape, Black/Gray/Clear Acrylic Tape and Gaffer Tape..
Check Stock

Upgraded Ender 5 Plus Silent Mainboard V2.2.1/V2.2 with TMC2208 Driver Customized Super Quiet Mute Motherboard for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO 3D Printer

  • Upgraded silent mainboard for ender 5 plus printer, V2.2 or V2.2.1 Version shipped randomly(they have same function, just the version number is....
  • Super Quiet and Noise Reduction. Use TMC2208 Stepper Motor Drivers, which the key component to eliminate the printer's motor when printing..
  • Notice: This new upgraded silent mainboard does not currently come pre-installed on ender 5 plus..
  • Bootloader pre-installed. The firmware can be modified by Cura with the USB cable..
  • Concern for safety. Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt....
Check Stock

Smalloo 1.2'×80ft Double Side Adhesive Thermal Conductive Cooling Tape for Heatsinks, LED Lights, IC Chip, Computer CPU, GPU, Raspberry pi, Modules

  • The 1.2"×80ft(wideth×length) double side adhesive thermal conductive tape for heatsink, like heatsink for LED, IGBT, IC Chip, Computer CPU, GPU, Modules, Raspberry pi, Electrically Insulated..
  • The thermal conductive cooling tape thermal conductivity: glass fiber thickness 0.2mm, 1.5 W/m-k. Long term heat resistant 120°C, short term heat resistant 180°C.
  • The thermal adhesive with the features of high thermal conductivity, insulation, strong stickiness, softness, compression..
  • The thermal adhesive tape is simple and practical , Combined with thermal paste, the effect will be better and very easy to use..
  • Double-sided thermal adhesive tape at low cost solve the problem of heat dissipation, it is great helper to solve heat dissipation for many electronics products..
Check Stock

Artillery Sidewinder SW-X2 3D Printer Latest Model Ultra-Quiet Printing 300x300x400mm Automatic Leveling Power Failure Recovery 95% pre-Assembled 110V-220V Free Switching

  • The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, makes high quality print, especially for flexible filament. When it....
  • The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR....
  • There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and....
  • SW-X2 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically....
  • With a 300 x 300 x 400 mm build volume, the Sidewinder X2 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive....
Check Stock

Thermal Interface Products Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm (1 piece)

  • EXCELLENT THERMAL CONDUCTIVITY - Upgraded thermal silica gel material with 12.8 W/mK thermal conductivity, our thermal pad greatly improve the heat transfer between the electronic elements and effectively cool the temperature down in seconds..
  • SUPER RELIABLE & DURABLE - High temperature performance in -40 ℃ - 200 ℃ will not melt, non-toxic, odorless, anti-corrosion, wear resistant, anti-static, fire retardant, compression, good insulation, contact with any electrical traces wouldn’t result in damage of any sort..
  • EASY & CONVENIENT TO USE - Dimension 200x200x2mm, the thermal pads can be cut freely according to your needs, perfect to filled contact surfaces gap, a great assistant for both beginners and professionals..
  • WIDELY APPLICATION - Perfectly replaces traditional heatsink compound grease paste, great for Control board, motor, electronics, CPU, GPU, Heat Sink, Power LED, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules.
  • NO RISK PURCHASE - Quick response and friendly customer service, we committed to provide superior thermal pads, easy to install, feel free to contact us if there is any issue with our thermal pads..
Check Stock

Creality Ender 3 3D Printer 220x220x250mm Economic Printer

  • 【Power Supply】:The temperature of the hot bed can reach 110°C after heating for about 5 minutes, realizing the needs of rapid heating and....
  • 【Resume Printing Function】:Creality Ender-3 3D Printer allows it to resume printing after power-off or lapse occurs and with thermal runaway....
  • 【Advanced Technology】:The use of MK8 extruder greatly reduces the risk of plugging and poor spillage.
  • ultra-quiet and smooth printing performance.
  • 【High-precision Printing】:Ender-3 with Y-shaped guide rail installation groove CNC machining to ensure accurate positioning, stable structure and....
  • 【1-year warranty】:We have equality warranty and provide after-sale customer service for the product. If any quality issue, Please feel free to....
Check Stock

Aairhut Thermal Pad 13W/mK, 120x120x1.5mm Silicone Cooling Pad GPU CPU Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop Heatsink/GPU/CPU/LED

  • Cool in Seconds -- With a thermal conductivity of 13W/mK, our thermal pad greatly improves heat transfer between the electronic elements and effectively cool the temperature down in seconds. It also provides insulation, shock absorption, extra sealing and protection for your electronic elements.
  • Easy to Use -- 120 x 120mm with slightly sticky on dual sides, cut it freely for your customized demand, tear off the dual-side protective film and paste it. The soft and compressible upgraded thermal material allows 30-40% compression rate which is a perfect substitute for traditional radiator compound grease..
  • Reliable & Safe -- High temperature resistance, works perfectly in -40℃-200℃. Non-toxic, odorless, anti-corrosion, anti-static, flame-retardant, compression, good insulation. The breakdown voltage of the silicone thermal pad above 1mm can reach 10KV, contacting with any electronic element will not damage it. ROHS certifiated & environment friendly..
  • Wide Application -- Suitable for electronics PCB surface, controller, CPU, GPU, radiator, power supply, VAG card, hard disk, computer host, notebook computer, memory stick, 3080/3090 graphics card, game console, car electrical appliances, microwave oven, TV, set-top box DC -DC, PDP LED IC SMD DIP and othe....
Check Stock

Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 5pcs

  • Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit.
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and ± 1.2 A.
  • Adjustable current control lets you set the maximum current output with a potentiometer.
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay).
  • Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection.
Check Stock