Reviews Thermal Dynamics 8215

KEMAO 10Pcs 9-8215 Plasma Cutter Electrode Fit for Thermal Dynamics SL60/SL100 Plasma Cutting Torch Consumables

  • Applicable for Thermal Dynamics SL60/SL100.
Check Stock

WeldingStop 9-8215 9-8210 SL60 SL100 Plasma Torch Electrode Nozzle 60A Tip for Thermal Dynamics Cutmaster 52 SL60 Consumables PKG/10 [Hafnium & Copper Electrode 9-8215]

  • ✓Use Hafnium wire and Copper to make 9-8215 electrodes——The electrode uses hafnium wire and copper as the main materials. Unlike other products on the market that use cheap Pickaxe wire. the service life of the electrode using hafnium wire is longer than other electrodes using pick wire.
  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 / 102 / 152 Cutter SL60 / SL100 Torch；These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 5pcs 9-8215 electrodes and 5pcs 9-8210 standoff tips WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 60A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

SL60 Torch Parts 5-0075 Electrode 40-60A Tip 9-8237 Shield 9-8281 Standoff Fit Thermal Dynamics Cutmaster 52 or 82 SL60 Torch Consumables 19pcs

  • for Torch SL60 or SL100 Plasma Cutting Hand Torches Specific To The Cutmaster true (52, 81, 82, 102 And 152) Series Systems.
  • 7 pieces x Drag Tip (40A 9-8207 & 60A 9-8210) + 3 pieces x 9-8215 Electrode.
  • 9-8281 Stand off Guide + 9-8235 Drag Shield Cup + 9-8237 Shield Cap (Replacements).
  • Original Front & Rear O-Ring 8-3486 & 8-3487.
  • 19pcs plasma consumables (#5-0075) for Thermal Dynamics Cutmaster SL60/SL100 Torch.
Check Stock

Robertshaw 710-502 Millivolt 70,000 BTU Capacity Gas Valve

  • The Vr8215 direct ignition gas valves replace nearly all standard and slow-opening Vr8205 and Vr8215 controls.
  • The Vr8215 valve can be mounted in any orientation and the reduced installation turning radius makes it much easier to install.
  • With the quiet operation, smaller size and ease of installation, the Vr8215 gas valve is a great fit for tight and open applications.
Check Stock

WeldingStop 9-0096 9-0093 Plasma SL40 torch for Thermal Dynamics CutMaster 42 Cutter 20pcs

  • Suitable for Thermal Dynamics CutMaster 42 Plasma Cutter (Ref. 1-4200) SL40 Torch (Ref. Code 7-0040).
  • 10 pieces x 9-0096 Plasma Cutting Electrode (NOT Thermal Dynamics 9-0096 Original).
  • 10 pieces x 9-0093 Plasma Cutting 40A Drag Tip (NOT Thermal Dynamics 9-0093 Original).
  • Nozzle Style: 40A Cutmaster 42 plasma drag tip.
  • These electrodes and tips are replacement parts which can be fit in SL40 torch, and these cutmaster 42 consumables are made by WS, not original.
Check Stock

Thermal Dynamics Cutmaster 42 40 Amp Tip 9-0094, 5 pack

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch (Torch Ref. Code 7-0040).
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0094, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

WeldingStop 9-0093 9-0096 Plasma Electrode Tip for Thermal Dynamics CutMaster 42 Cutter SL40 Torch PK-40

  • These plasma electrodes and tips can fit Thermal Dynamics CutMaster 42 Cutter and SL40 Plasma Cutting Torch.
  • There are total 40pcs of plasma cutting SL40 torch conusables in the package.
  • The plasma electrodes and tips are replacement parts, NOT Thermal Dynamics Original plasma consumables.
Check Stock

WeldingStop 9-0090 Standoff Guide for Thermal Dynamics Consumables SL40 Plasma Torch Consumables Cutmaster 42/12+ Plasma Cutter 1pc

  • Plasma consumable type: SL40 plasma standoff guide.
  • Plasma Standoff Guide Model Number: 9-0090.
  • The SL40 plasma standoff guide can fit Thermal Dynamics Cutmaster 42 ( 1-5130-1, 1-5130-2, 1-5131-1, 1-5131-2) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0090 standoff guide can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The 9-0090 standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

W.S SL40 Consumables Kit Electrode Tip Standoff for Thermal Dynamics Cutmaster 42 Plasma Cutter Torch 9-0093 9-0096 9-8251 QTY-22 Copper

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch Consumables.
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0093, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Mens Full Gold Watch Automatic Mechanical Gilded Steel Self-Wind Sapphire Glass Dress Waterproof Watch Gold

  • Classic style suitable for men and women, neutral size, with Japan 8215 automatic movement men and women, neutral size.
  • Sapphire Dial , will never Scratch , skeleton on the back,Solid stainless steel case and strap, vacuum gold plated.
  • Screw-in crown: Water resistant to 99 feet (30 M),Suitable for all occasions.
  • Movement : 8215, 21 jewels automatic mechanical movement, accurate travel time, with days function, support manual winding and automatic winding, do....
  • Packing list: 1PCS watch, 1 PCS watchbox, 1PCS warranty card, very suitable as a gift.
Check Stock

9-0093 Drag Tip 40A for Thermal Dynamics Cutmaster 42 Cutter SL40 Torch Qty-5

  • Torch model: For Thermal Dynamics Cutmaster 42 Plasma Cutter SL40 Torch.
  • These consumables are made by WS ,not original.
Check Stock