Reviews Thermal Conductive Gap Fillers

Thermal Pad,100x100x1.5mm 6W/mk Thermal Conductivity,with Good efficient Heat Dissipation Performance,for Laptop Heatsink/CPU/GPU/SSD/IC/LED Cooler

  • ✔Good Heat Dissipation：Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between....
  • ✔Application：Thermal Pad used in the control board of electronic and electrical products.
  • Pads and foot pads inside and outside the motor.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature....
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be....
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is....
Check Stock

Thermal Pad,200x200x0.5mm 6W/m.k Thermal Conductivity,with Good efficient Heat Dissipation Performance,for Laptop Heatsink/CPU/GPU/SSD/IC/LED Cooler

  • ✔Good Heat Dissipation：Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between....
  • ✔Application：Thermal Pad used in the control board of electronic and electrical products.
  • Pads and foot pads inside and outside the motor.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature....
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be....
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is....
Check Stock

Nab Cooling Thermal Pad 15 W/mK 90x50 Heat Resistance Non-Conductive High-Temperature Resistance Silicone Thermal Pads for Laptop Heatsink GPU CPU LED & PS4 90x50x1.0

  • Extreme Thermal Conductivity: With a thermal conductive value of 15W/mK, Nab Cooling’s thermal pad promises extreme thermal conductivity and reduces....
  • Easy installation: Unlike other thermal adhesives, the NB Supermax cooling pad is super easy to use. Just remove the plastic film, paste it on the....
  • Non-electrical conductivity: This silicon thermal pad GPU contains no metal and hence, is non-electrical conductive, which makes it safe to use. It....
  • Wide operating temperature range: NB Supermax thermal adhesive pad has an operating temperature of -60℃ to +220℃, making it compatible with a wide....
  • Safe to use: This thermal gap filler comes in 5 different thicknesses and is non-corrosive, non-toxic, non-curing, and odorless, making it super safe....
Check Stock

Testors 3507 Liquid cement w/precision app

  • Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance..
  • Cools your CPU and GPU: install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures..
  • Improved CPU cooling: ultra-low thermal impedance lowers CPU temperatures vs common thermal paste..
  • Installation Made easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler..
  • Filling the gap: xtm50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer..
  • Long Service Life: XTM50’s high-stability liquid compound lasts for years with no drying, cracking or change in consistency..
  • Safe For You And Your PC: Non-conductive and contains zero volatile compounds..
Check Stock

Tears of Chios: A Novel (Merchant Tides Series)

  • Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance..
  • Cools your CPU and GPU: install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures..
  • Improved CPU cooling: ultra-low thermal impedance lowers CPU temperatures vs common thermal paste..
  • Installation Made easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler..
  • Filling the gap: xtm50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer..
  • Long Service Life: XTM50’s high-stability liquid compound lasts for years with no drying, cracking or change in consistency..
  • Safe For You And Your PC: Non-conductive and contains zero volatile compounds..
Check Stock

LLPT Double Sided Thermal Tape Strong Adhesive Multiple 1.2 Inches x 108 Feet for Electronic Components LED Strips Heat Sinks(TC128)

  • easy mountings to replace screws for electronic components to increase the work efficiency, printing industry, filling gap on uneven surfaces of electronic components for tight fit, holding LED strips and etc..
  • MATERIAL: LLPT double sided thermal conductive tape is a combination of fiber glass that fills conductive ceramic powder for high efficiency and flexibility of thermal conduction & insulation.
  • coated with strong Acrylic adhesive, removable, repositionable and residue free for easy mountings to save time and work better on electronic..
  • EASY USE: Ideal to mount heat sink to IC chip, fit parts to heating source devices and hold LED strips.
  • clean the dust before application and cut the size as needed, stick and compress the tape, then take off the blue backing film liner by hand to mount another part. The removable property is to allow reposition after application without any damages to components. Avoid finger prints on adhesive layer for strong holding..
  • FEATURE: LLPT Thermal Conductive tape has high thermal conductivity, insulation, strong adhesive, flexibility, compression, high tensile....
Check Stock

Thermal Pad,100x100x0.5mm 6W/m.k Thermal Conductivity,with Good efficient Heat Dissipation Performance,for Laptop Heatsink/CPU/GPU/SSD/IC/LED Cooler

  • ...he control board of electronic and electrical products.
  • Pads and foot pads inside and outside the motor.
  • Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules..
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc..
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste..
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity..
Check Stock

Honda 08C50-C321S02 Coolant Ready to Use, 2 quart

  • Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance..
  • Cools your CPU and GPU: install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures..
  • Improved CPU cooling: ultra-low thermal impedance lowers CPU temperatures vs common thermal paste..
  • Installation Made easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler..
  • Filling the gap: xtm50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer..
  • Long Service Life: XTM50’s high-stability liquid compound lasts for years with no drying, cracking or change in consistency..
  • Safe For You And Your PC: Non-conductive and contains zero volatile compounds..
Check Stock

Cooler Master HTK-002-U1 2.37g Silicone Thermal Grease CPU Heat Sink Compound

  • Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance..
  • Cools your CPU and GPU: Install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures..
  • Improved CPU Cooling: Ultra-low thermal impedance lowers CPU temperatures vs common thermal paste..
  • Installation Made Easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler..
  • Filling the Gap: XTM50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer..
  • Long Service Life: XTM50’s high-stability liquid compound lasts for years with no drying, cracking or change in consistency..
  • Safe For You And Your PC: Non-conductive and contains zero volatile compounds..
Check Stock

Nab Cooling Thermal Pad 15 W/mK, 90x50x Heat Resistance, Non-Conductive, High-Temperature Resistance, Silicone Thermal Pads for Laptop, Heatsink, GPU, CPU, LED & PS4 (90x50x2.0)

  • Extreme Thermal Conductivity: With a thermal conductive value of 15W/mK, Nab Cooling’s thermal pad promises extreme thermal conductivity and reduces the temperature of a system to a great extent..
  • Easy installation: Unlike other thermal adhesives, the NB Supermax cooling pad is super easy to use. Just remove the plastic film, paste it on the surface, gently press, remove the film from the other side and install the system. .
  • Non-electrical conductivity: This silicon thermal pad GPU contains no metal and hence, is non-electrical conductive, which makes it safe to use. It won't cause any short circuits within the CPU..
  • Wide operating temperature range: NB Supermax thermal adhesive pad has an operating temperature of -60℃ to +220℃, making it compatible with a wide range of applications such as chipsets, laptops, GPU cards, and microcontroller units.
  • Safe to use: This thermal gap filler comes in 5 different thicknesses and is non-corrosive, non-toxic, non-curing, and odorless, making it super safe to use. Additionally, it won't wear, is anti-static, and is fire-retardant. All these qualities make it an all-in-one package.  .
Check Stock

Iceberg Thermal DRIFTIce Thermal Pad 80mm x 40mm x 1.0mm (13 W/mK)

  • Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance..
  • Cools your CPU and GPU: Install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures..
  • Improved CPU Cooling: Ultra-low thermal impedance lowers CPU temperatures vs common thermal paste..
  • Installation Made Easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler..
  • Filling the Gap: XTM50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer..
  • Long Service Life: XTM50’s high-stability liquid compound lasts for years with no drying, cracking or change in consistency..
  • Safe For You And Your PC: Non-conductive and contains zero volatile compounds..
Check Stock

100x100x1mm Thermal Pad for Computer CPU Fan GPU Coolers ，Efficient Thermal Conductivity Gap Filler Safe Handling Easy to Apply GPU CPU Heatsink Cooling Thermal Conductive Silicone Pad (Grey)

  • ✔You can according to the size of the gap between the heating element and the heat sink to select the appropriate thickness of the thermal silica Pad, the size of the self-cutting..
  • ✔Perfect To Filled Contact Surfaces Gap , Lmproves Heat Transfer Between CPU/Chipset/Motherboard/Module And Heatsink..
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc..
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials..
  • ✔If the chip power is too high, it is recommended to use a thermal paste, please search (B07STH2BD9). This is the thermal paste we sell. You can apply these two different products to your electronic equipment to achieve the best thermal conductivity..
Check Stock

iHTP Thermal Pad 12.8 W/mk Non Conductive Heat Dissipation Silicone Pad for PC Laptop Heatsink/GPU/CPU/LED Graphics Card, 70x20mm, 0.5mm, 1.0mm,1.5mm, 2.0mm 4 Packs

  • Excellent Thermal Conductivity - With upgraded thermally conductive silicone materia, the thermal conductivity is up to 15 W/mK, the Themalright thermal pads greatly improve heat transfer between electronic components and effectively cool down in seconds..
  • Easy to Use - Size 70x20mm(thickness include: 0.5mm,1mm,1.5mm,2mm, total 4pcs.), the thermal pad can be freely cut according to your needs, filling the contact surface gap perfectly, it is an excellent assistant for beginners and professionals..
  • Easy to Use -the thermal pad can be freely cut according to your needs, filling the contact surface gap perfectly, it is an excellent assistant for beginners and professionals..
  • Widly Application - nicely replaces traditional heatsink compound grease paste, suitable for control board, motor, electronics, GPU, heat sink, power LED, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC and any cooling modules..
  • NO Risk Purchase - We committed to provide superior thermal pads, easy to install, feel free to contact us if there is any issue with our thermal pads..
Check Stock