Reviews Thermal Conductive Adhesive

LLPT Double Sided Thermal Tape Strong Adhesive Multiple 1.2 Inches x 108 Feet for Electronic Components LED Strips Heat Sinks(TC128)

  • easy mountings to replace screws for electronic components to increase the work efficiency, printing industry, filling gap on uneven surfaces of electronic components for tight fit, holding LED strips and etc..
  • MATERIAL: LLPT double sided thermal conductive tape is a combination of fiber glass that fills conductive ceramic powder for high efficiency and flexibility of thermal conduction & insulation.
  • coated with strong Acrylic adhesive, removable, repositionable and residue free for easy mountings to save time and work better on electronic..
  • EASY USE: Ideal to mount heat sink to IC chip, fit parts to heating source devices and hold LED strips.
  • clean the dust before application and cut the size as needed, stick and compress the tape, then take off the blue backing film liner by hand to mount another part. The removable property is to allow reposition after application without any damages to components. Avoid finger prints on adhesive layer for strong holding..
  • FEATURE: LLPT Thermal Conductive tape has high thermal conductivity, insulation, strong adhesive, flexibility, compression, high tensile....
Check Stock

Thermal Grizzly Kryonaut Thermal Paste, 5.55g

  • Those thermal pads are made from a carbon-based polymer with nanoparticles.
  • They have a high thermal conductivity of 62.5 W/mk.
  • The non-adhesive and flexible carbon thermal padding can be used repeatedly and, unlike pastes, does not dry out.
  • The thermal conductive pad meets the expectations of gamers and IT enthusiasts alike, who are primarily looking for a high quality product from Thermal Grizzly.
  • The thermal pad material is virtually non-degradable, so its properties are solid and its lifespan almost unlimited (rumored to be up to 15 years).
  • Suitable for CPU cooling, GPU cooling, and any application that requires the use of pads instead of thermally conductive pastes.
  • Carbonaut is an electrical conductor - avoid contact between thermal pad and transistors or transformers.
Check Stock

Thermal Adhesive Tape (40mmx10 Meters 0.3mm Thickness) Double Side Adhesive Thermal Conductive Tape for Heat Sink of LED Light,PC and More, Electrically Insulated,1 Reel Pack

  • Thermally conductive adhesive tape is made of advanced thermal conductive PSA. They satisfy the demand of high adhesion and excellent thermal conductive efficiency by providing a preferential heat-transfer path between heat-generating components and heat sink or other cooling devices..
  • High tacky thermal conductive PSA. Only pressure is needed to form an excellent bond and thermal interface, effectively replace the grease and mechanical fixation..
  • The performance of thermal conductivity, insulation, buffer and high tacky make it as the best choice for electronic application..
  • Flexible and conformable. Ideal for uneven surfaces..
  • Widely used in: Assembly of LED light bar module and metal frame bezel. Assembly of DDR-RAM module and heat sink. Electronic components - IC, COP, CPU, MOS, etc. M/B, PS, PCB, LCD, PDP, PC, etc..
Check Stock

EDSRDRUS Thermal Adhesive Tape 0.4 Inches x 82 Feet High Performance Thermally Conductive Tape, High Durability, Apply for Heat Sink, LED Strips, Computer CPU, GPU,etc

  • Widely Used: From the hardware to the printing industry, EDSRDRUS thermal conduction tape has many applications. It’s perfect for electronic appliances, digital products, mobile phones, radiators, high-power electronic components, circuit board heat dissipation, computer CPU, GPU, and more..
  • Material: EDSRDRUS double-sided thermally conductive tape combines fiberglass and acrylic adhesive with conductive ceramic powder for high thermal conductivity and insulating properties. Coated with strong acrylic adhesive, it’s removable, repositionable, and leaves no residue. It’s easy to install, efficient, and perfect for electronic devices..
  • High Stability: With high and stable thermal conductivity, EDSRDRUS thermal tape lasts longer than standard heat-dissipating double-sided tape. It operates at temperatures of 80-120℃ (176-248°F) for at least 60 months..
  • Excellent Stickiness: Our exceptional adhesive bonds securely to a variety of surfaces. For optimal adhesion, the surface must be clean, dry, and flat..
  • Precautions for Use: Before use, please clean the surface of dust. Then cut, apply, and press the tape down as needed. Manually remove the backing liner. To keep the adhesive layer secure, avoid leaving fingerprints on it..
Check Stock

CPU-Cooler Thermal Grizzly Carbonaut Wärmeleitpad - 38 × 38 × 0,2 mm

  • Those thermal pads are made from a carbon-based polymer with nanoparticles.
  • They have a high thermal conductivity of 62.5 W/mk.
  • The non-adhesive and flexible carbon thermal padding can be used repeatedly and, unlike pastes, does not dry out.
  • The thermal conductive pad meets the expectations of gamers and IT enthusiasts alike, who are primarily looking for a high quality product from Thermal Grizzly.
  • The thermal pad material is virtually non-degradable, so its properties are solid and its lifespan almost unlimited (rumored to be up to 15 years).
  • Suitable for CPU cooling, GPU cooling, and any application that requires the use of pads instead of thermally conductive pastes.
  • Carbonaut is an electrical conductor - avoid contact between thermal pad and transistors or transformers.
Check Stock

104 Pcs Raspberry Pi 4 Heatsink, MazerPi Raspberry Pi Heatsink Set Aluminum Heatsink with 3M 8810 Thermal Pad Copper Heatsink for Raspberry Pi 4 Model B/ 3B+/ 3B/ 2B

  • High Perfromance Raspberry Pi heatsink with Thermal Conductive Adhesive Tape..
  • Fits for Most of Raspberry Pi models, compatible with most Raspberry Pi cases..
  • 8810 Thermal conductive adhesive tape backing, good performance on heat dissipation and long lasting..
  • Also could be used with other devices such as the Beaglebone..
Check Stock

Thermal Grizzly Carbonaut – Carbon Thermal Pad – Non-Adhesive, Flexible and Reusable – Very High Thermal Conductivity – Conducts Electricity (31 × 25 × 0,2 mm)

  • Those thermal pads are made from a carbon-based polymer with nanoparticles.
  • They have a high thermal conductivity of 62.5 W/mk.
  • The non-adhesive and flexible carbon thermal padding can be used repeatedly and, unlike pastes, does not dry out.
  • The thermal conductive pad meets the expectations of gamers and IT enthusiasts alike, who are primarily looking for a high quality product from Thermal Grizzly.
  • The thermal pad material is virtually non-degradable, so its properties are solid and its lifespan almost unlimited (rumored to be up to 15 years).
  • Suitable for CPU cooling, GPU cooling, and any application that requires the use of pads instead of thermally conductive pastes.
  • Carbonaut is an electrical conductor – avoid contact between thermal pad and transistors or transformers.
Check Stock

100Pcs 20x20x1mm Thermal Conductive Pads for Heatsink IC Chipset Northbridge GPU Heatsink

  • Thermal Conductivity: 1.5w/m-K,Material: conductive silica gel, Package include:100pcs 20x20mmx1mm Thermal Pads..
  • Note:It's sticky thermal pads, the surface of many products is smooth, vertical or inclined, you can choose our sticky thermal pads, it can stick....
  • Because the back of the conductive thermal pads is sticky (we use high viscosity double-sided adhesive tape on the back), it will be a little....
  • These pads are for lower heat producing processors(raspberry pi,ps4 etc), memory chips and IC's. These pads are NOT meant to handle the high heat....
  • Use experience: the effect of using on CPU is not very good but the heat dissipation on North/South Bridge is good. Experiment: notebook bare plate....
Check Stock

Nab Cooling Thermal Pad 15 W/mK 90x50 Heat Resistance Non-Conductive High-Temperature Resistance Silicone Thermal Pads for Laptop Heatsink GPU CPU LED & PS4 90x50x1.0

  • Extreme Thermal Conductivity: With a thermal conductive value of 15W/mK, Nab Cooling’s thermal pad promises extreme thermal conductivity and reduces....
  • Easy installation: Unlike other thermal adhesives, the NB Supermax cooling pad is super easy to use. Just remove the plastic film, paste it on the....
  • Non-electrical conductivity: This silicon thermal pad GPU contains no metal and hence, is non-electrical conductive, which makes it safe to use. It....
  • Wide operating temperature range: NB Supermax thermal adhesive pad has an operating temperature of -60℃ to +220℃, making it compatible with a wide....
  • Safe to use: This thermal gap filler comes in 5 different thicknesses and is non-corrosive, non-toxic, non-curing, and odorless, making it super safe....
Check Stock

Thermal Adhesive Tape 20mm by 25M, HPFIX High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability

  • ???? HPFIX thermal adhesive Tape is a simple and practical heat conductive tape, very easy to use, even for beginners..
  • ???? Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better..
  • ???? HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands..
  • ???? Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power..
  • ???? Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C )..
Check Stock

Thermal Pad,100x100x0.5mm 6W/m.k Thermal Conductivity,with Good efficient Heat Dissipation Performance,for Laptop Heatsink/CPU/GPU/SSD/IC/LED Cooler

  • ...he control board of electronic and electrical products.
  • Pads and foot pads inside and outside the motor.
  • Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules..
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc..
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste..
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity..
Check Stock

Nab Cooling Thermal Pad 15 W/mK, 90x50x Heat Resistance, Non-Conductive, High-Temperature Resistance, Silicone Thermal Pads for Laptop, Heatsink, GPU, CPU, LED & PS4 (90x50x2.0)

  • Extreme Thermal Conductivity: With a thermal conductive value of 15W/mK, Nab Cooling’s thermal pad promises extreme thermal conductivity and reduces the temperature of a system to a great extent..
  • Easy installation: Unlike other thermal adhesives, the NB Supermax cooling pad is super easy to use. Just remove the plastic film, paste it on the surface, gently press, remove the film from the other side and install the system. .
  • Non-electrical conductivity: This silicon thermal pad GPU contains no metal and hence, is non-electrical conductive, which makes it safe to use. It won't cause any short circuits within the CPU..
  • Wide operating temperature range: NB Supermax thermal adhesive pad has an operating temperature of -60℃ to +220℃, making it compatible with a wide range of applications such as chipsets, laptops, GPU cards, and microcontroller units.
  • Safe to use: This thermal gap filler comes in 5 different thicknesses and is non-corrosive, non-toxic, non-curing, and odorless, making it super safe to use. Additionally, it won't wear, is anti-static, and is fire-retardant. All these qualities make it an all-in-one package.  .
Check Stock

AVNTKER Double Sided Thermal Tape 1-inch/25mm Super Strong Adhesive Non Conductive Heatsink Sticky Tape for CPU, GPU, SSD Drive, HDD, VGA, PCB, LED Strips, 3D Printer, Raspberry Pi Radiator

  • Material: Double sided thermal tape is made of a mixture of acrylic polymer, thermal conductive ceramic powder and silicone adhesive, full roll size 20m x 25mm x 0.25mm (Length:66 feet x Width:1-inch).
  • Excellent Performance: Thermally conductive sticky tape has super stickiness and can firmly fix the heatsinks to the heating element, effectively improving the heat transfer between electronic components. (substitute screws, rivets, welds, fastener and liquid glue).
  • High Durability: Thermal duct tape has extremely stable performance, durable adhesion on both sides, no residual glue, and can work for a minimum of 5 years in high temperature environment of 80-155°C. ( If combined with heat conduction paste or cooling silica gel pad, the effect will be better ).
  • Security Application: The heat dissipation tape is insulative and non-conductive, which eliminates any risks of causing short circuit, adding more protection to the CPU, GPU, VGA cards, HDD, SSD drive, VRAM, M2 hard disk, Water cooling kit, Laptop, PCB, IGBT, Mos tubes, Diode, Triode, Circuit board, Logic board, Raspberry pi, LED cooler, 3D printer.
  • Widely Applications: Heavy duty two sided stick tape can be used for attach aluminum/copper heat sinks to heating element, fixed the carpet to prevent sl....
Check Stock