Reviews The Double component Polysulfide Sealant

Colorfast Siliconized-Acrylic Caulking - Non-Sanded Mapei Colors - 10.3 fl oz (Black #10)

  • Long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted, and used above and below the waterline.
  • Low viscosity, free-flowing polysulfide sealant for use on fine cracks and seams.
  • Non-shrinking, flexible, sandable compound.
Check Stock

C.R. LAURENCE 3M8578 CRL Black 3M Strip-Calk Bedding and Glazing Compound

  • Can be sanded, painted, and used above and below the waterline Not compatible with all paints, Sikkens, Cetol, Deks, Olje.
  • Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams Will bond to fiberglass, wood, metal, glass, and itself.
  • Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces..
  • A long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline..
  • Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself.
Check Stock

Novagard 02-MR100-10C1 NovaFlex Metal Roof Sealant - 10.3 oz Tube White

  • Non-corrosive, single-component, oxime-cured, silicone sealant and/or adhesive.
  • Used most frequently as a seam sealant or joint filler in metal roof systems.
  • Will develop primerless adhesion to most common construction substrates, and the neutral cure is compatible with most materials.
Check Stock

Novagard 02-MR196-10C1 NovaFlex Metal Roof Sealant - 10.3 oz Tube Regal Red

  • Non-corrosive, single-component, oxime-cured, silicone sealant and/or adhesive.
  • Used most frequently as a seam sealant or joint filler in metal roof systems.
  • Will develop primerless adhesion to most common construction substrates, and the neutral cure is compatible with most materials.
Check Stock

1021 Self-Leveling Lap Sealant for 5th Wheel RVs, Travel Trailers and Motorhomes

  • 1/2 GALLON OF THE TOUGHEST SEALANT: Tough Repair comes in 1/2 gallon pouch the perfect amount for medium to large size RVS. Covering all laps and roof vents or RV repairs. It is resealable so you can bust it out every time you need more sealant and will last up to 15 years on a shelf without drying out..
  • RV Sealant: Our permanent sealant is the last repair sealant your rv will need. goes on 1 time and last a lifetime, without peeling up drying out cracking or freezing. Repair RVs, Campers Trailers, Metal Buildings, Boats, Buildings, Gutters, Shingles, and so much more with tough repair sealant. Our sealant has a lifetime from peeling up from your original rv surface. We are so confident in our product we back it with a lifetime from peeling or cracking..
  • Newest Technology In Roofing: Tough Tech is over 5X stronger Than Silicone Sealant and is over 500 percent Flexible, and is the strongest liquid rubber rv repair product on the market with over 1600 psi tensile strength. Tough Repair can repair mobile homes, seal campers, fix leaks on RVs permanently or well replace the it. Silicone sealant doesnt work this is why you need to buy it every year. It has poor adhesion and peels up easily. Try the RV sealant that will fix your RV leaks permanently..
Check Stock

Clear Aquarium Silicone Sealant - 10.2 Fluid oz Cartridge

  • Container size: 10.2 Oz. This high modulus component RTV Silicone Sealant forms strong cohesive bonds to glass without the need of primers.
  • The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
  • ASI Aquarium Silicone Sealant is a non-slump sealant and can be applied to vertical surfaces without flowing or sagging.
  • Can be applied to surface temperatures from -18°C to +50°C (0°F to +120°F) and after curing, withstands constant operating temperatures from -57°C to +233°C (-70° F to 450°F).
  • Formulated for use with fresh and salt-water aquariums or a Vivarium.
Check Stock

Black Aquarium Silicone Sealant - 10.2 Fluid oz Cartridge

  • Container size: 10.2 Oz. This high modulus component RTV Silicone Sealant forms strong cohesive bonds to glass without the need of primers.
  • The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
  • ASI Aquarium Silicone Sealant is a non-slump sealant and can be applied to vertical surfaces without flowing or sagging.
  • Can be applied to surface temperatures from -18°C to +50°C (0°F to +120°F) and after curing, withstands constant operating temperatures from -57°C to +233°C (-70° F to 450°F).
  • Formulated for use with fresh and salt-water aquariums or a Vivarium.
Check Stock

Dow Corning 3138356 732 Clear Multi-Purpose Sealant -60 to 180 Degree C 90 mL

  • Clear general purpose silicone adhesive/sealant.
  • One-component adhesive/sealant that is easy to apply.
  • Non-sag, paste consistency that cures to a tough, flexible rubber.
  • Acetoxy cure system that cures at room temperature when exposed to moisture in the air.
  • Adheres to glass, metal, porcelain, ceramic, painted surfaces, non-oily woods, many plastics and rubbers.
Check Stock

NP1 POLYSEAL WHITE 10OZ

  • MasterSeal NP1 10.1 Oz. Polyurethane Sealant, White NP1WHT12.
  • A versatile moisture-curing high-performance polyurethane sealant with permanent elasticity (Formerly: Sonolastic NP 1)..
  • or use on active, vertical and horizontal interior, exterior joints including expansion wall joints, floor and pavement joints, curtain walls, panel walls, precast walls, window frames, structural components, dams, spillways, and storm water drains..
  • Substrates include concrete, masonry, aluminum, and wood. Bonds to concrete, masonry, and other materials without a primer..
Check Stock

3M Polyurethane Sealant 540, Gray, 310 mL Cartridge

  • Polyurethane Seam Sealer/Adhesive Compound is a one component, moisture-cure sealant designed exclusively for automotive uses..
  • This product cures under the effect of atmospheric humidity to form a permanently flexible and resistant joint..
  • This product is a high quality elastomeric sealant formulated to combine high flexibility with high ultimate strength, permanent bonds and long service life..
  • This product provides excellent adhesion to a wide variety of substrates and comes in an easy to use, non-sag consistency suitable for easy application with a standard caulking gun in both horizontal and vertical automotive joints..
  • Easy application, ready to use, no mixing required.
Check Stock

Industrial Products Seal Spray Window and Door Foam No Warp One Component Polyurethane Gun Foam Sealant (Case of 12 / 23.2oz Cans)

  • High yield allows doing more work with one canister. Coverage: 2,200 cubic inches per can.
  • 1.5 Times better sound and thermal insulation than other sealants.
  • No-Warp sealant that's paintable and able to be sanded after curing.
  • Prevents drafts and saves money on monthly energy bills.
  • One-component, ready to use polyurethane gun foam for various building applications..
  • Suitable for use in higher temperatures, up to +104 degree F.
  • Low curing pressure and moderate post expansion avoid deformation of building elements.
  • High thermal and acoustic insulation value.
  • Used for Installation of window and door frames, Sealing of thermal and acoustic insulation boards, Insulation of penetrations, Sealing and connection of joints.
  • INCLUDES: 12 / 23.2oz CANS, A Foam gun is the only tool needed..
  • Included components: 12 / 23.2oz Cans of Sealant.
Check Stock

White 3M Marine 5200 Adhesive / Sealant 10 fluid ounce cartridge

  • 3M Marine Adhesive Sealant 5200, PN06500, White, 295 mL Cartridge.
  • 3M Marine Adhesive Sealant 5200 is a one-component, high-strength, moisture-curing, gap-filling polyurethane for permanent bonding of wood, gelcoat and fiberglass. It cures to form a firm, rubbery, waterproof seal on joints and boat hardware, above and below the waterline. This product has been trusted throughout the marine industry for over 50 years.
  • Permanent bonding – above and below the waterline.
  • Tough and flexible polyurethane polymer forms strong bonds.
  • Capable of retaining strong bonds during vibration, swelling, shrinking or shock.
Check Stock

MasterSeal NP 1 080492301663 Aluminum Gray Cartridges Sealant Pack of 10

  • MasterSeal NP1 10.1 Oz. Polyurethane Sealant, Grey.
  • A versatile moisture-curing high-performance polyurethane sealant with permanent elasticity (Formerly: Sonolastic NP 1)..
  • For use on active, vertical and horizontal interior, exterior joints including expansion wall joints, floor and pavement joints, curtain walls, panel walls, precast walls, window frames, structural components, dams, spillways, and storm water drains..
  • Substrates include concrete, masonry, aluminum, and wood. Bonds to concrete, masonry, and other materials without a primer. Does not require mixing. Skins overnight and fully cures within a week..
Check Stock