Reviews Terminal Clip

InLine 34601 Firewire Adapter 6 Pin Female to Male

  • 【SAFETY AND SECURITY】RJ12 screw terminal adapter can ensure a firm and non-corrosive connection. The fixed RJ12 interface and compact design can effectively shield the external electromagnetic signal interference. RJ12 screw terminal adapter has strong signal stability and reliability..
  • 【100% BRAND NEW AND HIGH QUALITY】The compact design and reliable connection of this RJ12 screw terminal adapter make the signal more stable and the connection more convenient, which greatly facilitates your use..
  • 【PLUG AND PLAY]】This RJ12 screw terminal adapter has a clip that is easy to snap, easy to carry, and easy to insert and remove. The size of the adapter: 50*20*11mm. The adapter is small and light, so it is very easy to use..
  • 【HIGH-QUALITY MATERIALS】This RJ12 male to 6-pin threaded connector is made of high-strength flame-retardant plastic, durable, tear-resistant, high and low temperature resistant, impact resistant, scratch resistant, high quality and durable, and can be used for a long time..
  • 【100% SATISFACTION GUARANTEE】The screw terminal adaptor is highly performance and of premium quality but if there is any quality problems with our product please don't hesitate to contact us, we will provide you the most friendly customer service..
Check Stock

Fluke BT510 Battery Analyzer

  • ...lly and give you a buzzer prompt, reminding you whether the tested component is faulty..
  • [ How to Use ]: Clip the red clip to the positive electrode of the car battery and the black clip to the negative electrode of the car battery, press button to “Positive”side with LED lighting RED, conact the tip to positive terminal of tested component to active the component. If LED turns to GREEN with buzzer, stop testing and check the component if defective or not, or rating current of component is higher than that of this tester..
  • [ Packing Include ]: 1 X Power Scan, 1 x Probe Tip, 1 x Battery Hookup Clips, 1 x User Manual, 2 x clips. The cable length of the circuit tester is about 4m(13ft) which allows you access and test any electrical system easily. Note: This circuit tester can not be used for 110/220V systems, it is only used for DC 6-24V systems. Do not use on AC voltage..
  • [ NOTE ]: Before performing the test, please make sure that your tester is properly connected. Connect the red clip to the positive terminal of the car battery. Then connect the black clip to the negative terminal of the car battery. During the continuity test, the auxiliary ground wire needs to be connected to one side of the wire under test. When testing components in/out of the v....
Check Stock

Crocodile Alligator Clips Test Leads 10 Pieces and 5 Colors, Dual Ended Electrical Alligator Clips Test Probe Lead Wire Cable with Insulators Clips for Circuit Connection/Electrical Testing

  • 【What You Get】：You will get 10pcs electrical alligator clips with 5 colors. The total length is about 49cm/19.29inch, and the clip terminal is 35mm/1.38inch, not 28mm/1.1inch, or 24mm/0.94inch. They can be used temporarily for circuit connection, power probes, jumper wires testing, and similar to the Crocodile month, and thus named as Crocodile Clip (electronic spring clip)..
  • 【Long Durable】：The test cable lead is made of high-quality PVC material. So, it has good quality and good contact, and the working life will be much longer. Moreover, the material is much more environmental friendly..
  • 【Detachable Design】：This test jumper wire is adopted detachable design. The usage way is very simple and convenient. It is very fast to be connected from the two terminals, e.g., power probe, circuit testing. It is widely used as motor test, electronic appliance test, digital product and power connection test..
  • 【Extendable and Safety】: When you test an electronic appliance performance, the test leads is extendable to connect the battery power tightly and conveniently. The PVC plastic cover is insulated to protect safety to some extent. BUT NOTE the clip terminal is metal and DON’T be used over the rated voltage..
Check Stock

Fluke TLK281 SureGrip Automotive Test Lead Kit

  • Kit includes (1) insulation piercing clip set, (1) suregrip silicone test lead set, (1) suregrip test probe set.
  • Also includes (1) suregrip alligator clip set, (1) suregrip large jaw alligator clip set, (1) soft case.
  • Use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or relay.
  • The large jaw alligator clips to get a good ground on the engine or to connect to the battery terminals.
  • An extra long set of alligator clips easily grip to the alternator bat terminal or the S terminals.
Check Stock

UOHGDPY DIN Rail Terminal Blocks,Universal Compact Wire Wiring Connector (40 pcs connectors+4 pcs Article in Parallel+4 pcs Digital Identification+2 pcs Fixed clamp+40 pcs Screw)

  • 【Easy to Use】The patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the rail terminal into the 35mm iron and aluminum DIN rail, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time..
  • 【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 40pcs 12AWG terminal blocks, 4pcs connection bar, 4pcs digital identification, 2Pcs Fixed clamp,40pcs screws, 2pcs end stopper bracket and a transparent storage box..
  • 【Universal Compatibility】 This Wire Connector is suitable for solid and flexible wire. Connect any combination of solid, stranded, and flexible copper wires. Suit for solid wire 0.08-4.0mm² /28-12 AWG, flexible wire 0.5-2.5mm² /20-14 AWG. It is widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery etc..
  • 【Premium Quality】Terminal blocks, high quality brass metal body and the best flame retardant insulating material modified nylon PA66 shell, it has a long life, no corrosion, anti-aging, 4KV and shock resistance, strong structure firmly locked to DIN rail..
Check Stock

Direct-Lighting H System Track Adapter with Hook H870-WH (White)

  • H system, 3-wire-1 circuit track system. 120V single circuit track..
  • H system : 2-clip terminals on one side,1-clip terminal on the other side. 15/16-inch if measure from tip to tip..
  • Accepts chain hung fixture, can hold up to 20 lbs..
  • RATING : UL Listed. Rated for Indoor use or Dry locations..
Check Stock

Weber 67532 Igniter Kit, Genesis II 330/335

  • Weber 67532 Igniter Kit for Genesis II 330 and 335 Grills Manufactured in 2019.
  • Includes: Ignition module, 6 terminal (1) Electrode, 36″, black (1) Electrode, 27″, yellow (1) Electrode, 46″, green (1) Electrode, 32″, red (1) Ground wire, 38″, blue (1) Sideburner wire, 38″, white (1) CLIP WIRE SADDLE SLF ADHSIVE NTRL GP 19 1 SWITCH MOMENTARY IGN CHROME/GRY GP 17 1 WIRE ASSY IGN LOW VOLTAGE C1 3B GP 17 1 SCREW 1/4-20 X .625 DP HH MAGNI 510 OUS 1 SCREW 6-32 X 1/4 PPH SS 1 ELECTRODE SUM S/B ’03 1 ELECTRODE CLIP SUM S/B ’03 1 INST IGN MDL/ELECTRODE OC GEN 19 ENG 1.
Check Stock

Microchip Reader RFID 134.2Khz, Pet ID Microchip Scanner with 0.91 Inch High Brightness OLED Display 128 Pieces of Tag Information Storage for Animal Tracking

  • CASEMATIX protective travel case for select terminal card reader, receipt paper and accessories includes water resistant case only.
  • Keep Your card reading terminal secure and bring it anywhere – built-in rubberized carry handle, stylish purple exterior and removable turquoise shoulder strap make it fun, portable and safe.
  • Padded internal protection with egg crate foam bottom keeps the portable credit card scanner protected always and easily accessible with dual zippers and rubber pull tabs.
  • Soft foam bottom absorbs impacts while the padded middle divider separates the accessories from the point of sale unit. The bottom compartment fits your credit card machine and paper rolls in 7.0” x 4.5” x 3.0” of usable space.
  • The premium nylon adjustable shoulder strap is included and can be removed in seconds using the metal easy clip hardware. Exterior dimensions measure 8.0” x 6.0” x 4.0” – INCLUDES CARRY CASE FOR POS TERMINAL ONLY.
Check Stock

Timing Light 12V Ignition Timing Light Automotive Strong Flash Timing Lights with Sliding Sensor Clip,Long Test Lead, Reverse Polarity Protection, Overload Protection for Car, Motorcycle Petrol Engine

  • ... device or affecting the car or battery in the event of mis-operation. Timing light also has overload protection. If the current or load is too large during the operation, timing light will automatically disconnect the current to protect the battery and device..
  • 【Easy Operation】Clamp the red clip to the positive terminal of the vehicle's battery. Clamp the black clip to the negative terminal. Hook up the spark plug sensor clip to the high voltage line of the No.1 cylinder. Note: The arrow on the sensor clip should point to the direction of the spark plug to work properly..
Check Stock

WB17t10006 Terminal Block Kit Compatible With Surface Burner Receptacle Kit (2 pack)

  • FITS:Surface Burner Terminal Block Kit WB17T10006 Used for Ge Stoves Using Wb30t10074 & Wb30t10078 Ers30t10074 & Ers30t10078 Or Wb17t10006.
  • MODEL NUMBERS:Surface Unit Connector Kit for older part numbers on Ranges : WB17T10009, 1038747, WB17K10003, WB17T10001, WB17X10007.
  • PAKAGE INCLUDES:Electric Range Element used for GE brand on Stove / Oven / Ranges. Kit includes the female contact with wires, terminal block and mounting clip.
  • SYMPTOMS: Shorts out, corroded or arced causing the element not to work. (Tools needed: 1/4" nut driver, needle nose pliers, knife, electrical tape, zip tie).
  • COMPATIBLE:This is non-original aftermarket part but It made exactly fit for General Electric StoveThe product is not sponsored or endorsed by,or affiliated with the brands it fit,including GE/Hotpoint/RCA/Sears..
Check Stock

uxcell 3pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Long

  • Package Content: 3pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 10pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Length

  • Package Content: 10pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

Direct-Lighting H System Single Circuit Pendant Track Adapter - for 120V Pendant with Wire Cord 2 AMP H880-BK (Black)

  • H System Single Circuit Pendant Track Adapter - for 120V Pendant.
  • For 120V, H system Single circuit 3-wire track..
  • H System : 3-wire-1 circuit track system. 2-clip terminals on one side,1-clip terminal on the other side. 15/16-inch if measure from tip to tip..
  • Accommodated 120V Line Voltage Pendant with wire cord with 1/2-inch diameter.
  • UL Listed. Rated for Indoor use or Dry locations..
Check Stock