Reviews Teflon Tube Fitting

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

  • PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
  • Teflon tubes are made of premium PTFE material, unique....
  • Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
  • Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
  • Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..
Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

  • Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
  • Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
  • AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
  • Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.
Check Stock

Hellbent

  • PacBay Heavy Duty ER Roller Guides - Durable one piece frames machined from solid 6061 marine grade aluminum which providing saltwater approved corrosion resistant and power control. Teflon coated stainless steel sleeve bearings reduce friction allowing ultra-smooth stainless steel rollers. Aluminum side plates offer increased guide strength.Large knot clearance roller design makes it heavy duty and powerful..
  • Solid Construction - Solid E-glass graphite composite blanks offer incredible pulling power.These trolling rod using the combination of carbonfiber and fiberglass blanks for unparalleled strength,durability and sensitivity..
  • Non-slip shrink tube handle-Shrink tube covered on Large diameter EVA Top grip for greater leverage and comfort .These rods are custom built which introduce outstanding performance and value.
  • Aluminium Gimbal fitting with rubber cap ,Aluminium reel seats with Double reverse knurled reel seat locks makes everything perfect.
  • Professional trolling rod for IFGA standup fishing- designed to tackle the toughest of fish like Marlin, Sail Fish, Tuna, Barracuda, Wahoo, King Mackerel, Mahi Mahi, Kingfish and Shark. All Berrypro fishing rod have One Year Warranty , please feel free to contact us directly if there is any question.
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

  • SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
  • Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
  • Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
  • It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
  • this enhances the installation of the push connect fittings process in a narrow space.
  • These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock

Ted Lele 8Meters 26.2Ft 4mm OD 2mm With Tube cutter PTFE Teflon Bowden Tube for (white) (8M)

  • Package Content : 1pc PTFE Teflon Bowden Tube.
Check Stock

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

  • Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
  • Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
  • Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
  • To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....
Check Stock

Refrigerator Icemaker Hose (20 FT) - Lead Free - Universal Fit - Water Supply Line - ¼” x ¼” Connections - Stainless Steel Braided

  • ★WATER&FOOD USE Materials: Our Ice maker water line kit is made of food grade quick connect fittings and NSF Certified Tubing, which are widely used in water purification to provide you clean, clear, and delicious water and ice cubes..
  • ★COMPATIBILITY: Compatiable with most standard under sink filtration system or reverse osmosis systems using with 1/4" or 3/8" plastic water line. Multiple uses such as ice makers, water coolers, dispensers, humidifiers, water fountain, or soda machinerefrigerators and many more.
  • ★EASY INSTALLATION:This high-quality reverse osmosis ice maker kit provides all the necessary attachments so that you can connect your RO system not only to your faucet but to your refrigerator as well.Provides quick and convenient assembly-saving time&expense. New generation Non-Locking Clip technology offer an easy DIY installation without tools required..
  • ★FUNCTION&QUALITY: Provides pure water from your RO system or water filtration system to your ice makers, refrigerators, water coolers, fridge dispensers and more. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. Our quality system ensures a superior level of product quality..
  • ★COMPLETE DO-IT-YOURSELF KIT INCLUDE: 17 foot NSF c....
Check Stock

3/4” Rod End Heim Joint KIT Left and Right Hand Thread 2 Big .750” Chromoly Joints Panhard kit

  • Heim Joint Rod End Kit: Each pack comes with 1-right hand thread and 1-Left hand thread Heim set along with jam nut spacers that are zinc coated to offer more durability and tube adapter to fit 1" ID tube.
  • Long Term Use: These massive Heim joints are heat-treated and hard chrome plated to give you a better finish for longer use. Chromoly is stronger than steel and offers 28,000 Pound static load rating for heavy-duty performance.
  • Friendly Support: Our Heim joints for 3/4” rod end are backed by our 24/7 friendly support that is always willing to help. If you have any issues with the product then just contact us so we can help you resolve them smoothly and quickly.
  • Multi Function: Made using a 3/4” bore so the Heim joints offer more strength and precision fitting which coupled with the is Teflon Nylon Race ensures exceptional durability to complement steering joints and link joints on hot rods or custom builds..
  • Chromoly Construction: These Heim joints for steering and suspension are made using Chromoly (offers higher strength than carbon steel) as well as being resistant to rust and corrosion to provide long term use..
Check Stock

CHPOWER PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter + Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Collet Clip

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety....
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • 2 Colors options - white and blue teflon tube are avaliable,They are compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

Seeutek Heat Press 12x10 inch 5 in 1 Shirt Press Tshirt Pressing Machine Swing Away Digital Heat Transfer Multifunctional Sublimation Press Combo for T Shirts Mug Hat Plate Cap

  • ...adopts double-tube heating design, which makes the whole heating plate heat evenly, and the printed pattern is clearer than single-tube heating design. Adjust the proper pressure with the adjustment knob for better performance. The heating plate is easy to remove, easily replace the plate press and hat press..
  • ✅【Teflon Coated Heating Plate】Heat press 12x10 adopted the latest teflon coated heating plate, protect your vinyl, clothes while doing the heat transfer. The teflon heat plate is heat resistance, easy to clean, and can make pattern more steady. Innovative alloy slide guide rail design for easy conversion between other heating element. Ergonomic design handle, comfortable and durable..
  • ✅【Slide Out Design & 360° Swing Away】Heat press 5 in 1, swing away design, allows the heating element to be moved aside, reducing the chances of unexpected touch. Temp range: 0~482℉(0~250℃), Time range: 999s. Set the temp and time according to demand, it stops heating when the heat plate heats up to the preset temp. And sound alarm will be issued when the countdown is over..
  • ✅【Widely Used】Tshirt pressing machine combo can be used for t-shirts, caps, ceramic plates, mugs, coasters, mouse pads and more. The heating plate can quickly reach the pre....
Check Stock

304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)

  • STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
  • SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
  • LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
  • SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
  • APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..
Check Stock