Reviews Teflon Adhesive Release Liner

3M 5952/BLK02515 Scotch 5952 VHB Tape: 1/4" x 36 yd, Black

  • 3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner..
  • 3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is perfect for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners..
  • Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape..
  • Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter..
Check Stock

3M Scotch 924 ATG Tape: 1/2 in. x 33 ft. (Clear Adhesive on Tan Liner)

  • 3M Scotch 924 ATG Tape is a permanent unsupported acrylic adhesive transfer film (pressure-sensitive adhesive pre-applied to a special release liner)..
  • 3M 924 is a permanent, all-purpose transfer tape that offers excellent adhesion to most paper stocks. 3M Scotch 924 ATG Tape has good solvent resistance and excellent UV resistance..
  • Can bond a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics. Some application ideas include mounting promotional items and posters, core starting, and mounting picture frame mat boards and dust covers..
  • The main difference between 3M 908 and 3M 924 ATG tapes is that 908 is pH neutral (acid-neutral). Scotch 924, like all ATG tapes, is reverse wound on the roll so it is designed to be used in an ATG dispenser..
  • Carrier/Backing: N/A (Unsupported). Adhesive: medium-firm acrylic. Release Liner: tan densified Kraft paper. Thickness: 6 mils (carrier, adhesive, liner) 2 mils (carrier, adhesive) 4 mils (liner). Adhesion: 25 ounces per inch (to stainless steel test panel). Service/Operating Temperature: up to 180F. Core: 1-inch diameter plastic..
Check Stock

Polyken 105c 2 x 25 blue plastic liner [PRICE is per ROLL]

  • Release Liner: low-density polyethylene (LDPE) film.
  • Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner).
Check Stock

3M 4611/GRY136 Scotch 4611 VHB Tape: 1" x 36 yd, Dark Gray

  • 3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
  • 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) ....
Check Stock

3M 4611/DGRAY0755 Scotch 4611 VHB Tape: 3/4" x 15 ft, Dark Gray

  • 3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
  • 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) ....
Check Stock

Polyken NAT236 Multi-Purpose Double Coated Carpet Tape, 36 yards Length x 2\ Width, Natural

  • Release Liner: low-density polyethylene (LDPE) film.
  • Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner).
Check Stock

Polyken 105C/NAT136 105C Multi-Purpose Double Coated Carpet Tape 1 x 36 yd Natural

  • Release Liner: low-density polyethylene (LDPE) film.
  • Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner).
Check Stock

3M 5958FR/BLK055 Scotch 5958FR VHB Tape: 1/2" x 15 ft, Black

  • 3M 5958FR VHB Tape is a flame retardant, very conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tape with a PE film release liner. It bonds high, medium and medium/low surface energy substrates and provides handling convenience, cushioning, damping, and impact resistance..
  • Great for industries like aerospace where flame redundancy is often a requirement. It is part of the 3M 5952 family of VHB products which providing adhesion to the broadest range of substrates, including most powder coated paints..
  • Carrier/Backing: closed-cell acrylic foam (conformable). Adhesive: modified acrylic. Release Liner: red PE film (printed). Thickness: 45 mils (carrier, adhesive, liner) 40 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 100 pounds per inch (longitudinal). Service/Operating Temperature: up to 200F. Application Temperature: 50F (minimum)..
  • Density: 50 pounds per cubic foot. Dynamic Overlap Shear: 100 pounds per square inch. Short Term Temperature Resistance: up to 300F. Standards Met: FAR 25.853 (a) 12 second vertical burn, Appendix F, Part I (a)(ii).
  • Toxicity (Draeger Tube ABD0031, AITM 3.0005. Core: 3-inch diameter..
Check Stock

Polyken 105C-P/NAT225 105C-P Multi-Purpose Double Coated Carpet Tape Paper Liner 2 x 75 ft Natural

  • Release Liner: low-density polyethylene (LDPE) film.
  • Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner).
Check Stock

39" x 5 Yard PTFE-Coated Fabrics Sheet Roll Sublimation Heat Resistant PTFE Fiberglass Fabric for Heat Press Transfer Sublimation Printing - 8Mil Thickness (0.2mm)

  • Teflon sheet is used commonly when using a heat press to transfer designs onto fabric. It prevents ink from staining and transfers from sticking to the heat plate. Telfon eliminates scorching on products..
  • Size: 39"x5 Yard (100 x 457cm), Nominal Thickness: 8 Mil (0.2mm), Package Size: 100*8*8cm, Gross Weight: 1.9kg, Weight (g/m2): 250, Tensile Strength (N/50mm): 1100.
  • It can help to prevent the ghosting effect often created by the paper sliding across the shirt during the lifting of the plate. It is used as a weight, keeping the transfer paper in place to ensure perfect results!.
  • Applications: - Teflon sheet for heat transfer printing. - Heat sealing plastic film - Reusable laminating press release sheets (Solar laminator release) - FDA compliant for food processing, packing and handling - Tray lining for non-stick baking and drying.
  • Applications: - Blister pack for covers - Covering the sealing surface on polyethylene bag-making equipment - Release liner in bonding process - Chemically inert Gaskets/seals/diaphragms.
Check Stock

JVCC FELT-09 Polyester Felt Tape [4mm thickness felt] 1 in x 10 ft Black

  • JVCC FELT-09 Polyester Felt Tape is a 4mm thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has....
  • On many of the adhesive felt products the rolls will have an approximately 2-inch to 4-inch leader of double-sided film tape applied to the release....
  • It is sometimes easier to try to peel the corner of the felt away from the release liner (instead of the release liner away from the felt) since you....
  • Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC FELT-09 hides seams being....
  • Service/Operating Temperature: -30F to 150F. Application Temperature: 60F (minimum).
Check Stock

ISC Racers Tape HT1614 ISC Helicopter-OG-HD Surface Guard Tape: 1" x 60 ft, Transparent

  • ...de: Body panels on race cars. Bicycle frames. Skis. Kayaks. Surfboards. Ground effects. Bumpers. Tailgates. Top fuel wings. Trailer walls. Rail protection on stand-up paddle boards (SUPs). Any painted or unpainted surface that is prone to weathering, chipping or scratching. Etc..
  • Carrier/Backing: polyurethane film. Adhesive: acrylic. Release Liner: 92 lb. polycoated white paper. Thickness: 19.2 mils (carrier, adhesive, liner) 14.5 mils (carrier, adhesive) 12 mils (carrier) 4.7 mils (liner)..
  • Adhesion: 110 ounces per inch (to stainless steel test panel). Tensile Strength: 80 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 275F. Application Temperature: 50F (minimum). Elongation: 500%. Core: 3-inch diameter..
Check Stock

Jaybird and Mais MOLESKIN Moleskin Roll: 2 in. x 1 yds. (Tan)

  • Jaybird & Mais Moleskin Roll is widely used to help with blister recovery and to protect against high friction areas. It's made from softly brushed, extremely strong napped cotton sateen fabric that is coated with latex-free zinc oxide adhesive..
  • This soft material protects sensitive areas. Since the tape has high tensile strength, it can be effectively use as ankle stirrups. It can be used along with foam tape to keep securely in place and prevent from sticking or shredding in shoes or socks..
  • Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered)..
  • Adhesive: latex-free zinc oxide. Carrier/Backing: cotton sateen cloth fabric..
  • Release Liner: paper. Thickness: 35 mils (carrier, adhesive, liner) 29.5 mils (carrier, adhesive) 5.5 mils (liner). Made in the USA..
Check Stock