Reviews Tee Brass Fittings

Innova 3640 Professional Fuel Injection Pressure Tester

  • Helps identify and diagnose low fuel pressure a faulty fuel pressure regulator leaking injector(s) fuel leaks and/or clogged fuel filters.
  • Properly rated fuel hose and brass fittings make this tool a step above the rest in quality and longevity.
  • Large easy-to-read 2" dial face with 0-100 PSI scale.
  • Durable 16" gauge hose and 6-foot bleed-off hose with solid brass fittings.
  • Includes Ford GM and Chrysler test adapters and a "Tee" adapter for import vehicles.
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

30 Pcs 1/2 Inch Brass PEX Fittings with 100 Half Clamp J Hook with Nail Black Pipe Supports PEX Mounting Bracket Coupler Crimp Fittings for PEX Tubing Fitting Connection (Elbow, Tee, Straight)

  • Extensive Usage: these PEX tubing clamps are suitable for copper crimping ring system, plastic or rubber hose, PEX crimping tool and brass crimping accessories, also nice for hot or cold water systems, nice combination to meet your needs in different applications.
  • Easy to Install: this brass PEX fittings kit can be installed without flame, flux or glue, which can help you save time and energy, simple and convenient to use, and can provide a nice using experience for you.
  • Size Details: the crimp PEX fittings are compatible with crimping or cinch type rings and connectors.
  • The adjustable size range of black pipe supports with nail is about 10-14 mm/ 0.39-0.55 inch, please choose the right size before ordering.
  • Solid and Sturdy: these PEX pipe fittings are made of quality brass, safe and stable, solid corrosion resistance, high temperature ductility, waterproof and oilproof, which can be applied for long time.
  • Nice Combination: you will receive 30 pieces of 1/2 inch brass PEX fittings, including 10 elbow, 10 tee and 10 straight coupler crimp fittings, 100 black half clamp j hook with nail, sufficient quantity can easily meet your daily use and replacement needs.
Check Stock

SharkBite 1 Inch Tee, Pack of 3, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U374LF

  • SHARKBITE BRASS PUSH TEE: This push-to-connect fitting can be used when joining pipes of the same sizes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this push tee can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

  • 【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
  • 【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
  • 【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
  • 【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
  • 【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..
Check Stock

Maxline M7580 Master Kit, 3/4-Inch x 300-Feet

  • of 3/4-Inch Tubing, (3) Air Outlet Kits, (2) Tee Fittings, 3/4-Inch Straight Fitting, (20) Pipe Clips, Debar and Cutter Tool.
  • 175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter.
  • Compression style nickel plated brass fittings.
  • maximum from the air compressor, up to 4000 sq..
Check Stock

Exchilerator Ready To Brew - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counter Flow Wort Chiller

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
  • READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
  • 5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

mistcooling Pre-Assembled, Low Pressure System Kit,25' Mist Ring,Recommended for Fans with 30-46'' Di, 25 Inch Diameter 8 Nozzles, Beige Color Tubing

  • 8 - Nickel-plated brass Nozzles, 7 misting Line Tubing,1 - 6 ft feed Line,1 - end elbow, 7 - misting tee, 8 Zip ties.
  • Nozzles:Nickel-plated brass button series ,With stainless-steel Orifice ,Standard 10/24” thread ,in 0.015” OD Orifice ,Rust-resistant fixed impeller pin.
  • Fittings :¼” OD Compression Fittings,Beige Color to blend with most patios and backyards,Compression Type Fittings,Leak Proof.
  • Garden Hose Adapter : ¾” OD, Fits most Garden Faucets ,With Filter Washer to protect your nozzles.
  • Tubing :¼” OD Flexible PE Tubing ,Operating Pressure 40 to 100 PSI ,UV Resistant Flexible Tubing.
  • 25'' Fan Mist Ring with 8 or 10 Nozzles -Recommended for fans with 30-46'' Diameter.
  • Supply Line : 6 Ft Feed Line, Low Pressure tubing , Beige Feed Line.
  • Simply fix to your garden hose and ready to use.
Check Stock

SUNGATOR 1/2 Inch Tee PEX Brass Crimp Fitting(12-Pack),Lead Free Brass Pex Tubing Fitting (1/2

  • Environmental Protection: Lead free brass, comply with drinking water standard..
  • Premium Quality: High-quality brass with thickened wall, resists corrosion, rust and high temperature (32200)..
  • Applications: This brass crimp fitting can be used for PEX pipes in plumbing jobs..
  • Compatible Products: Use with stainless steel clamp rings, or PEX Crimp tool and copper rings.(Clamp rings are not included in this set.).
  • Package Includes: 1/2Inch x 1/2Inch x1/2Inch Tee PEX Fittings (12 PCS).
Check Stock

Dishwasher Installation Kit - 10 FT Stainless Steel Braided Dishwasher Hose kit,Food Grade PEX Inner Tube Dishwasher Water Line with 3/8"x3/8"x3/8" Tee Stop Valve,3/8"x3/8"MIP Elbow,3/8"x3/4"FHT Elbow

  • ..., etc..In particular the 3/8" x 3/8 "x 3/8" Comp tee stop valve, convenient for you add a branch waterways on the existing water supply and freely control on and off..
  • 【Easy Installation】:The dishwasher water line each end has brass 3/8" compression fittings and built-in high-quality sealing ring,ensure a securely and solid connection.
  • The tee stop valve and elbows with standard thread,plumber's sealant tape is also included in the kit.
  • even DIY,your first installation or replacement work can be completed in minutes,and no leakage..
  • 【Safe material】:Our dishwasher hose inner tube made by food grade PEX materials, non-toxic ingredients,odorless and tasteless, have tested to meet NSF/ANSI standards.
  • the brass tee stop valve and elbows are lead free.Ensure you enjoy the convenience and safety that dishwashers bring to you and your family's lives..
  • 【Prime quality 】:The water line outer layer is wrapped with superior grade 304 stainless steel braided wire,the brass tee stop valve and elbows are single piece brass construction.
  • So all the parts are extremely safe and durable,there is no need ....
Check Stock

MAXLINE COMPRESSED AIR TUBING MASTER KIT, 1' BENDABLE TUBING (M6580V, 300FT WITH SHUT OFF)

  • of 1-Inch Tubing, (3) Air Outlet Kits WITH SAFETY SHUT OFF BALL VALVES, (2) Tee Fittings, 1-Inch Straight Fitting, (30) Pipe Clips, Debar and Cutter Tool..
  • HIGHER FLOW RATE: This M6580V 1" Maxline 300FT Master Kit flows at 82 CFM at 300FT, versus the M7580 3/4" equivalent that flows at 39 CFM at 300FT..
  • 175 PSI Maximum working pressure, 1-Inch inside diameter x 1.2-Inch outside diameter..
  • Compression style nickel plated brass fittings. Use only with Maxline 1-Inch system..
  • Recommended on Industrial sized air compressors 7.5HP through 15HP..
Check Stock