Reviews Tct Saw Grinder

Mini Circular Saw, WESCO 4-1/2" 6.0A Compact Circular Saw 5200 RPM Max. Cutting Depth 1-11/16"(90°), 1-1/8"(45°）with Scale Ruler，3 Blades for Wood, Soft Metal, Tile and Plastic Cuts

  • 【6.0Amp Pure Copper Motor】Powerful 6.0A pure copper motor provides 5,200 RPM high cutting speed, ideal for cutting tile, wood, decorative metal, DIY..
  • 【Flexible Cutting】Adjustable 90° and 45° bevel cuts, you can freely adjust the required cutting depth to get different cutting methods. The maximum depth of cut is 1-1/8" (28mm) at 45° and 1-11/16" (42.8mm) at 90°, suitable for cutting different thicknesses..
  • 【One-handed use and safe design】Small and compact size, with ergonomic handle, make your operation easier, faster and more convenient. This mini saw has excellent safety, double switch design, press the self-locking switch and the start switch at the same time to start the machine, which can well prevent damage caused by misoperation..
  • 【Powerful Cutting Performance】Three types of saw blades are suitable for different application scenarios. 24T TCT wood saw blade, 40T TCT plastic saw blade, soft metal and diamond saw blade, you can change the suitable saw blade according to the scene you need..
  • 【Buy with confidence】The box includes 1 4-1/2 inch Wesco Compact Circular Saw, 1 Diamond Saw Blade, 1 24T TCT Saw Blade, 1 40T TCT Saw Blade, 1 Parallel Rail and 1 Hex Key , 1* user manual and 2 years warranty.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...ls Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...ls Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

120 Volt Electric Circular Saw Blade Sharpener - Bench Mounting Grinder 110W with Diamond & Emory Grinding Wheels

  • Suitable for sharpening TCT saw blades in range from Ø90-400mm..
  • Fitted with a Ø100mm diamond coated grinding disc for optimising TCT saw blade performance..
  • Motor block tilts 25° left and right to handle different blade tooth configurations.
  • Sturdy die cast aluminum base and indexing arm.
  • Portable compact design Includes 4" diamond wheel, 4" emery wheel.
Check Stock

DEHUIWI TCT Hole Saw Set,10PCS TCT Hole Saw Kit for Hard Metal, 5/8"-2-1/8" Inch Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【TCT hole saw set includes】 :10 pcs hole cutters with dimensions 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 30mm(1-1/8"), 35mm(1-3/8"), 45mm(1-3/4"), 50mm(2"), 53mm(2-1/8"),10 pcs pilot drill bits and 1 pc hex key.A variety of sizes to meet your different needs..
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for ....
Check Stock

Diablo by Freud Diablo DOU5S 5 pc Universal Fit General Purpose Oscillating Blade Set (5-Piece)

  • What You Get: Why pay $10-$20 per blade? JANCHI saw blades match & exceed name-brand quality at a fraction of the price. 4 Pack Combo 4-1/2 Inch Compact Circular Saw Blade Set with 3/8" Arbor. 2 pack 24T TCT blade for wood, 1 pack 60T HSS blade for sheet metal, 1pack 60# diamond disc for tile, meet your everyday needs..
  • 24T TCT BLADE: Manufactured with durable premium alloy steel material, with hardened,fully polished and chrome plated surface, sharper construction-grade tungsten carbide teeth, for long-lasting cuts in wood, plastic, and composite materials..
  • 60# DIAMOND DISC: Manufactured with high quality and durable heat-treated manganese steel and #60 diamond grit can provide longer cutting life.The segmented design improves airflow, helps the saw blade to dissipate heat, and remove cutting dust, provides a smooth, fast, clean and efficient cutting, Max 13,000 RPM, ideal for cutting ceramic tile, stone tile, backer board and cement..
  • 60T HSS BLADE: Manufactured with high-speed steel, more durability.Sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results. Ideal for thin sheet metal and aluminuim , wood, plastic and drywall..
  • COMPATIBLE:These circular saw blades are compatible to use with electric circul....
Check Stock

3-3/8 Inch Circular Saw Blade Set 85mm, 4-Pieces Metal Cutting Circular Saw, TCT / HSS / Diamond Saw Blades for Wood, Plastic, Metal, Tile Cutting

  • Premium Material: 24T Carbide-Tipped Saw, 44T High-Speed Steel, 60G Diamond Blades. High-quality material offers a long life, toughness, and wear-resistance..
  • 24 TCT: For cutting wood, plywood, plastic and PVC.
  • 44T HSS: For cutting aluminum, aluminum alloy, PVC, wood.
  • 60 Diamond blade: ceramic tile, stone tile, backerboard, cement.
  • Wide Application: These carbide saw blade are perfect for rotating tools, power tools, woodworking, metal and plastic cutting..
  • Package Included: 4 Pack 3-3/8 Inch (85 mm) Assorted Circular Saw Blades, including 1x TCT 24T Wood Blade, 2x HCS 60T Metal Blade, 1x 60G Diamond Blade..
  • Customer Service: We offer you 100% satisfaction and guarantee. If you have any question about this circular saw blade set, please contact us without hesitation. We will get back to you as soon as possible..
Check Stock

GALAX PRO 12A 5500RPM Corded Circular Saw with 7-1/4 Circular Saw Blade and Laser Guide Max Cutting Depth 2.45 90° 1.81 45° for Wood and Log Cutting

  • Efficient and powerful motor: 12 Amps powerful pure copper motor windings, this circular saw can deliver full-size performance at 5,500 rpm to cut....
  • Adjusting depth of cutting and bevel angel: A depth fast and accurate adjustment lever allows for adjustment of the saw's base plate. Maximum cutting....
  • Laser and rip fence: An adjustable fence for thinner cuts, with graduated ruler markings on the base and fence. The integrated adjustable laser allows....
  • Lightweight saw: Only 7.1 lbs. and reduce your fatigue. Dust extraction facility for maintaining a clean work area and keeps the cut line free of dust....
  • What you get: 1 x circular saw, 1 x 24-teeth TCT blade, 1 x 48-teeth TCT bladerip guide, 1 x hex key, warranty card.
Check Stock

Mini Circular Saw Compact Electric Circular Saw with 3 Saw Blades 4A Pure Copper Motor 3-3/8”4000RPM Scale Ruler Ideal for Wood Soft Metal Tile and Plastic Cuts

  • 【POWERFUL MOTOR】: Featured with a 4 Amps copper motor, the compact circular saw can reach a high cutting speed of 4000RPM to cut tile, wood,....
  • 【3 BLADES AND COMPACT】: Comes with 1x24T TCT blade for, wood cuts/ 1x80T HSS for metal cuts/ 1pcdiamond blade for tile cuts, small size and weight....
  • 【ADJUSTABLE CUTTING DEPTH】: Easy-set depth gauge lever for adjustable cutting depth from 0-27mm(1-1/16’’). With the laser guide, the circular....
  • 【ERGNOMIC AND SAFE】: The soft rubber handle reduces hand fatigue effectively. Also with a vacuum adaptor so that you can connect it to your vacuum....
  • 【PACKAGE CONTENTS】You will get: 1 * Compact Circular Saw 13in(length) x 2.7in(width) x 5.1in(height).
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 3/4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：3/4Inch, Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：4 Inch (100mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4-1/2 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：4-1/2 Inch (115mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock

ASNOMY 8PCS Large TCT Hole Saw Kit for Hard Metal 5/8 -2-3/8 16-60mm Carbide Tipped Hole Saw Hole Cutter with Titanium-Plated Pilot Drill bit for Metal Stainless Steel Iron Wood Plastic

  • Top Quality：Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its....
  • Large Size：Include 5/8Inch(16mm), 7/8Inch(22mm),1-3/16Inch(30mm),1-9/16Inch(40mm), 2Inch(50mm), 2-3/8Inch(60mm)，and 2pcs Extra Titanium-Plated....
  • Unique Three-blade Design: This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper....
  • Multipurpose Tools：This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless....
  • High precision and Easy to Use: TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand....
Check Stock