Reviews Tareplacement Lid

RUYUFE Lid Stay 105 Degree with Soft Close, Lid Hinge with Soft-Down for Door Cabinet Kitchen

  • LID STAY HINGE FOR DOWNWARDS OPENING DOOR--Designed for downward opening lid door ( Bureaus, buffets, wine glass cabinet) with concealed, piano or butt hinges. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Lid stay support built-in hydraulic dampening device..
  • STURDY LID STAY WITH SOFT CLOSE-- Per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch. Recommended door thickness: 20mm (25/32"). The Lid stay hinge is made of nickel plated steel and plastic..
  • KEEP LID STAY OPEN -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for DOWNWARDS opening doors, such as vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges..
  • COMPACT DESIGN OF LID HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • EASY TO INSTALL LID SUPPORT-- Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right..
Check Stock

STA Black Armrest Cover Center Console Lid Fit for Chevy Avalanche Silverado Tahoe GMC Yukon XL Sierra 2007-2014 2007 2008 2009 2010 2011 2012 2013 2014-15217111 924-875

  • Center Console lid Arm Rest Cover Replacement for 2007-2013 Chevy Silverado,Tahoe,Suburban,Avalanche,GMC Sierra,Yukon,Yukon XL Armrest Center Console Cover Lid Kit 15217111.Fit for Chevy Avalanche Silverado Tahoe GMC Yukon XL Sierra 2007 2008 2009 2010 2011 2012 2013 2014.Center Console Lid Kit Assembly-15217111 924-875..
  • Package include: 1x Center Console Lid.This is a direct replacement for the oem part and includes new hardware to make installation very simple.Fits for center console lid 07-13 silverado,center Console Lid w/Latch ,15217111 ,15941534,Fits for yukon center console lid,Fits for yukon denali center console lid,Fits for 2007 gmc yukon denali center console lid,Fits for 2007 yukon denali center console lid,Fits for gmc yukon center console,Fits for gmc yukon center console lid..
  • Brand New Replacement Center Console Lid w/Latch. Constructed of high-quality materials for long-lasting durability. Same grain & texture as the factory Lid. Complete assembly not just the cover, front push button & tray assembly included..
  • Fits for chevy silverado armrest 2011,Fits for 2011 chevy silverado armrest latch,Fits for 2008 gmc sierra center console lid,Fits for gmc sierra center console lid cover,Fits for gmc sierra center console,Fits for gmc sier....
Check Stock

Lid Stay 105 Degree Open with Soft Close Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2

  • LID STAY WITH SOFT CLOSE FOR TOY BOX-- The Lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight....
  • LID STAY SLOW CLOSING ---Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
  • EASY TO INSTALL LID SUPPORT-- Updated install instructions can be downloaded in Amazon page. Easy to follow installation instructions ensure a perfect....
Check Stock

RUYUFE Lid Stay 105 Degree Open with Soft Close Lid Support for Toy Box and Upward Top-Opening Flap Doors Easy to Install

  • STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight....
  • LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
  • EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the....
Check Stock

Strut Your Stuff - Funky And Teasing

  • LID STAY 105 DEGREE WITH SOFT CLOSE- Safety & easy to solution for toy box lid and kitchen cabinets, your lids will soft close and gently to avoid....
  • KEEP LID HINGE STAY OPENING- Never worry again about having to prop the lid open. This lid support can hold the lid open until you are ready to close.....
  • EASY TO INSTALL TOY BOX HINGE- Only takes 5 minutes to complete the installation of lid hinge by following the installation measurement. Easy to....
  • COMPACT DESIGN OF LID STAY HINGE- The compact design allows for installation in tight areas. The lid hinges supports opening the lid at a maximum....
  • 100% MONEY-BACK GUARANTEE - If you are unhappy with the product for whatever reason we will refund you, no questions asked!.
Check Stock

Klean Kanteen Bamboo Cap - Brushed Stainless

  • ★ DURABLE STRAW LID FOR STANDARD MOUTH - Straw lid with straws is a great choice of replacement lid for hydroflask standard mouth. Durable handle, easy to carry, no worry about dropping your hydroflask with straw lid standard mouth..
  • ★ STRAW LID EASY TO USE: Super easy to open, while latching closed securely. Allows one-handed drinking, easily flip straw top and sip water from straw lid, perfect for indoor and outdoor sports, camping, hiking, etc. Wider finger loop is comfortable to carry your flasks anywhere. Popular water bottle lid accessories to meet daily hydration on the go..
  • ★ COMPATIBLE WITH HYDRO FLASK STANDARD MOUTH - Straw lid fits Hydroflask standard mouth 18 21 24 oz (mouth diameter 1.91"). This standard mouth straw lid also fits Simple Modern Ascent, the Coldest Water Standard Mouth, Klean Kanteen Classic Bottle. REMIND: Not for WIDE MOUTH hydroflask 12 or 18 oz, ONLY for hydroflask STANDARD MOUTH / SMALL MOUTH..
  • ★ GOOD VALUE - Comes with 2 Straws and 1 straw cleaner. Standard mouth straw lid is made of high quality BPA free material, durable straw cap will last for years. Safe and easy to use for both adult and kids. Select this popular style sport cap as replacement lid for hydroflask standard mouth is a great choice..
Check Stock

Spout Lid Compatible with Hydro Flask Wide Mouth Lid for Hydroflask 12 16 18 20 32 40 oz Wide Mouth Black

  • [EASY TO DRINK & CARRY] Spout lid enables maximum water flow and one-handed drinking. The lid is leak-proof, better sealing than straw lid, no worry....
  • [COMPATIBLE WITH HYDRO FLASK WIDE MOUTH WATER BOTTLE] Lid fits perfectly hydroflask 12 16 18 20 32 40 oz WIDE MOUTH water bottle. IMPORTANT NOTICE:....
  • [BPA FREE] Lid with no straw, durable replacement lid for hydroflask, perfect lid for hydrating on the go, which enables easy drink in a more safe and....
  • [PREMIUM MATERIAL] Spout lid made of BPA Free material, durable material and will last long..
  • [HIGH QUALITY] Top spout lid for hydroflask wide mouth, lid good for replacement. enjoy easy hydration. Contact seller directly and get prompt reply....
Check Stock

Toy Box Hinge Soft Close, Lid Stay 105 Degree Open--Zishengho Lid Support Hing for Toy Chest and Upward Top-Opening Doors, Safety Easy Installation

  • LID STAY 105 DEGREE WITH SOFT CLOSE- Safety & easy to solution for toy box lid and kitchen cabinets, your lids will soft close and gently to avoid smashing fingers. 1pc lid stay support the range of door weight 6-10 lbs, Height 18-19 inch. 2 pcs hinges support 10-20lbs..
  • KEEP LID HINGE STAY OPENING- Never worry again about having to prop the lid open. This lid support can hold the lid open until you are ready to close. This lid stay is deal for Top opening or upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box..
  • EASY TO INSTALL TOY BOX HINGE- Only takes 5 minutes to complete the installation of lid hinge by following the installation measurement. Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting..
  • COMPACT DESIGN OF LID STAY HINGE- The compact design allows for installation in tight areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • 100% MONEY-BACK GUARANTEE - If you are unhappy with the product for whatever reason we will refund you, no questions asked!.
Check Stock

SICHEER Dehydrator Rack Stainless Steel Stand Accessories Compatible with Ninja Foodi Pressure Cooker and Air Fryer 6.5 and 8 Qt

  • UPGRADE DESIGN: Stack up the pressure lid and the crisping lid with our silicone lid stand. Also it can be used as a lid rest and water collecting tray to fit various sizes of pressure lids by design, to save space and keep your kitchen counters and stovetops neat and tidy..
  • PREVENT DAMAGE: The 1.2 inch-thick lid holder perfectly keeps a sufficient space between the 2 lids (lid and counter/stovetop), leaving no scratches at all to the lid..
  • EASY TO USE: Just put the lid holder on the fryer lid/countertop, then the pressure cooker lid on top..
  • BPA FREE: Made with high quality BPA-free silicone, makes hand and dishwasher easy and safe..
  • WHAT YOU GET: 1 Piece lid holder accessories with a 4.2-inch diameter, specifically for steam pot - Instant Pot replacement parts and Ninja Foodi accessories and air fryer 5 Qt, 6.5 Qt and 8 Quart..
Check Stock

2 Pack Pot Lid Handle Replacement Knob Kitchen Cookware Universal Replacement Pan Lid Holding Handles

  • 【Humanized Design】The replacement knob on the top of the lid adopts an isolated hollow design and the surface is frosted. People can firmly lift the lid by grasping the hole to avoid accidental touching of the lid and burns..
  • 【Quality Materials】The pot lid handle is made of quality bakelite, high temperature resistant and insulated, can be firmly covered on the cookware cover.
  • with screws, it has strong and firm grip..
  • 【Widely Applications】The lid knob suitable for many kinds of cookware pot lid covers, such as kettle, oil pot, frying pan, pot lids, saucepan Lids, pan lids ,Casserole Glass Lid Pot, rival crock pot lid, just replace the lid knob then you can save your favorite and functional Lid..
  • 【Dimensions】The bottom of our pot lid knobs has an outside diameter of 2.5"/6.3cm, an inside diameter of 2"/5cm, a height of 1.4"/3.5cm, and a screw length of 0.6"/1.5cm. Can be used for pot lids with thickness less than 0.4"/1 cm hole diameter of 0.5"-0.7"/1.3cm-1.8cm..
  • 【Make Pot Lids New】Just disassembling the old handle, and put the knob, rubber gasket and metal gasket correctly, and then use screw to tight them, finish the installation in minutes. Let's bring your old pot lid to new life!.
Check Stock

The Recipe [Explicit]

  • UNIQUE MOTORCYCLE LID: Our gloss black Doughboy lid has a unique take on a brimmed hat with a twist that allows its wearer to be on the cutting edge of novelty lid design. Our motorcycle lid is crafted with a baseball cap as an inspiration. Our lid is also created to be worn forward or backward..
  • CLEVERLY DESIGNED: Our patent-protected lid for motorcycles is constructed using a sturdy plastic shell. "Dent" is added to make our lid look like a baseball cap. Our lid may not fit like a traditional lid and, but the sleek design of our lids is for a safe and enjoyable ride. (DISCLAIMER: Our lids are NOT-DOT approved.).
  • FEATURES TO LOVE: Our stylish motorcycle lid comes with two (2) liners which are removable and washable. Mike's Pro Lids motorcycle lids also feature adjustable chin straps and are crafted with sturdy ABS material. Our cool lids are also available in various sizes (S, M, L, XL) and finishes..
  • IDEAL PRESENT: Our motorcycle and bike lids can make a great gift idea. Help a rider close to you safe during travel time with our cool lid. Our baseball cap-inspired lid will also make a great addition to your spec....
Check Stock

Bench Seat Hinge for Toy Chest Heavy Duty No Slam Safety Torsion Hinge Lid Support Stay Hinge

  • 2 in 1 HINGE AND LID STAY/SUPPORT HINGE in 1 piece. No metal visible on outside of your toy chest or bench.See installation images..
  • HIGH RAISING: This metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over- center 95-degree angle to prevent lid from falling unexpectedly..
  • HEAVY DUTY: Maximum lid weight of this hinge is 30 lbs to keep your lid from slamming, so this heavy duty lid support is ideal for industrial use like storage containers and trunks..
  • SAFE AND SECURE: This soft close hinge is specially designed to prevent pinched fingers, so it will never slam shut to your child. This specially manufactured lid support won't let the lid fall..
  • BUILT-IN FEATURE: This metal no slam lid support features a built-in stopping mechanism which prevents seat top from slamming on fingers. This built-in stopper makes this lid support more secure and ensures that lid is stable after opening..
Check Stock

LCOMK Lid Stand Silicone Lid Holder Accessories Compatible For Ninja Foodi Pressure Cooker Air Fryer 5 Qt 6.5 Qt 8 Quart, Space Saving Accessories Fit Ninja Instant Pot Kitchen Accessory (Grey)

  • UPGRADE DESIGN: Stack up the pressure lid and the crisping lid with our silicone lid stand. Also it can be used as a pot lid holder organizer in kitchen cabinet pantry and condensation collector cup replacement to fit various sizes of pressure lids by design, to save space and keep your kitchen counters and stovetops neat and tidy..
  • PREVENT DAMAGE: The 1.2 inch-thick lid holder perfectly keeps a sufficient space between the 2 lids (lid and counter/stovetop), leaving no scratches at all to the lid..
  • EASY TO USE: Just put the lid holder (as well as a pot lid organizer rack holder or pot lid rack holder organizer) on the fryer lid or countertop, then the pressure cooker lid on its top..
  • BPA FREE: Made with high quality BPA-free silicone, makes hand and dishwasher easy and safe..
  • WHAT YOU GET: 1 Piece lid holder with 4.2-inch diameter, a kitchen accessory compatible specifically for steam pots - Instant Pot replacement parts (i.e. instant pot accessories fit duo plus and others) and Ninja Foodi accessories and air fryer 5 Qt, 6.5 Qt and 8 Quart..
Check Stock