Reviews Tapping Machine Wrench

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

Beer Tap Faucet Handle Black - Set of 10

  • ...16" - 1/2" / 2.5mm - 12mm capacity size. Overall size(closed) is 19.3cm x 2.3cm x 1cm/7.6inch x 0.9inch x 0.4inch(LxWxH). Shank diameter is 8mm/0.3inch..
  • HIGH QUALITY TAP REAMER - The adjustable tap wrench is made of high-quality steel, with high hardness, strong wear resistance and long service life. The end of the tapping wrench tool is knurled for easy and firm grips. The hand wrench tool has one rigid handle and one adjustable jaws, which can easily and firmly clamp the tools..
  • MULTIPLE USE - The tap reamer wrench is designed for use with small tools that require manual rotation, such as taps, reamers, drill bits, and screw extractors. Manual operation is very simple and convenient, which can improve your work efficiency. It is also very suitable for DIY tapping..
  • EASY TO USE - When using a tapping wrench, apply even force with both hands. The wrench and the tap should form a 90-degree angle, and the tap and the threaded bottom hole are perpendicular to each other, rotate the adjustable metal tap handle reamer wrench in a certain direction..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you have any questions, please feel free to conta....
Check Stock

Kastar 971 SAE and Metric Thread Restorer Kit

  • ...ndle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod..
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping..
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.).
Check Stock

KOOTANS Ratchet T Handle Tap Wrench + 5pcs M3 M4 M5 M6 M8 Machine Screw Metric Thread Milling Plug T-shape Taps Set, Both Way Hand Tap Set Adjustable Manual Tapping Tool Kit for Home Use (Short)

  • ...le, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod..
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping..
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.).
Check Stock

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock

uxcell Adjustable Ratchet Tap Wrench T-Handle, for Metric M5-M12 Taps, Tap Reamer Tapping Ratcheting Wrench Hand Tool, 295mm (11.61-inch Approx.) Body

  • Tap Wrench: Fit tap size: M5-M12 (Mertic)/ 3.5mm-12mm, 295mm (11.61-inch) body length. Steel jaws and knurled chuck provide secure and firm grips on hex or square drives.
  • Applications: It is used for hand tapping taps, and also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
  • Easy To Use: The ratchet tap wrench can be operated with one hand, and easily switched from right-handed tapping to left-handed tapping, or locked for non-ratcheting use. Easy to use even in narrow space..
  • Features: T-handle ratcheting tap wrenches provide quick and efficient ratcheting action. The diamond-shaped head has a beautiful and practical anti-skid design.
  • Tips: The T-handle can be detached. It also can be slipped from side to side for positioning convenience, and added leverage in tight places..
Check Stock

uxcell Adjustable Ratchet Tap Wrench T-Handle, for Metric M5-M12 Taps, Tap Reamer Tapping Ratcheting Wrench Hand Tool, 111mm (4.37-inch Approx.) Body

  • Tap Wrench: Fit tap size: M5-M12 (Mertic)/ 3.5mm-13mm, 111mm (4.37-inch) body length. Steel jaws and knurled chuck provide secure and firm grips on hex or square drives.
  • Applications: It is used for hand tapping taps, and also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
  • Easy To Use: The ratchet tap wrench can be operated with one hand, and easily switched from right-handed tapping to left-handed tapping, or locked for non-ratcheting use. Easy to use even in narrow space..
  • Features: T-handle ratcheting tap wrenches provide quick and efficient ratcheting action. The diamond-shaped head has a beautiful and practical anti-skid design.
  • Tips: The T-handle can be detached. It also can be slipped from side to side for positioning convenience, and added leverage in tight places..
Check Stock

M26 x 1.5 Tap Thread Right Hand M26x1.5 Straight Fluted Machine Threading Tap RH M26 x 1.5 Metric Thread Milling Tap HSS 26 x 1.5

  • Package included: 1pc HSS M26 x 1.5 metric right hand thread tap M26x1.5..
  • Thread Type: Right Hand Thread M26x1.5 Tap RH.
  • How to use:Start tapping after boring holes corresponding to the thread size by using drill bits.On hand tapping, operate tapping in an upright position parallel to bored holes by using a tap wrench..
  • My Note : Multi purpose tool Suits a variety of applications for threading and tapping..
Check Stock

uxcell Thread Milling Threading Tap 1/4\-28 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

  • Specifications: M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75 that you can use for tapping various threads..
  • Material: high speed steel 4241/ bearing steel, suitable for soft metal, such as aluminum plate, iron plate. High speed steel 6542, suitable for ordinary stainless steel and other hard materials..
  • Standard thread distance design, clear and tidy, no burr..
  • One set including 8 tools：M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''..
  • These machine hand taps are used for machining nuts or other common thread on the machine..
Check Stock

US Stock M3-M16 Electric Tapping Machine 375rpm 110V Flex Tapping Arm Machine ANSI Full Set Tap Collets Holder Included

  • M16R electric tapping machine has manual, automatic and gap 3 modes for your choice. Automatic mode can control the depth of tapping effectively to realize blind tapping.
  • Tapping angle: Universal. Tapping Capacity Stainless steel/Steel: M3-M16, Aluminum: M3-M16, Working Area Horizontal: 1045mm(41.1inch) Weight: 32KG (70.5lb.) Vertical: 400mm adjustable.
  • Main parts for tapping machine, import servo motor, HD human machine interface, high-precision cantilever bracket, universal head(tapping for vertical/horizontal), import tap collet(standard).
  • Applicable materials: aluminum, copper, A3 steel, 45 steel, cast iron, pig iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials, plastic and wood and other materials.
  • 1-year warranty. Free shipping to your door. Standard equipped tap collet size: ANSI standard M3,M4,M5,M6-M8,M10,M12,M14 and M16. 8PCS in total. If you need ISO/JIS or DIN standard collet, please leave a message.
Check Stock

uxcell Adjustable Tap Wrench Handle, for Metric M1-M10 W1/16-3/8 Taps, Tap Reamer Tapping Hand Tool, Medium Carbon Steel Handle with Nickel Plated

  • Tap Wrench: Fit tap size: M1-M10 (Mertic)/ 1/16" - 3/8"(UNC/UNF) / 1.5mm-10mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life.
  • Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
  • Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps.
  • Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread.
  • Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other.
Check Stock