Reviews Tapping Machine Quick Change Chuck

Thread Taps Drill, 7Pcs/Set Better Chip Removal Spiral Combination Tap Easy Installation High Speed Steel for Soft Metal(#2)

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
Check Stock

Fein 4-Speed Cordless Drill/Driver with Safety Cell Technology - 12 Volts, 3 Battery Capacity, 400/700/1400 2500 RPM - 71161061090

  • Outstanding Performance - It has the highest performance cordless drill/driver with brushless motor, 4-speed gearbox and solid metal interchangeable chuck. It includes small QuickIn all-metal chuck 531 inches/lbs. with high concentricity accuracy..
  • Safety Ergonomic - It has Fein SafetyCell technology that protects the battery and the machine from deep discharge, high torques up to 354 [40] inches/lbs.[Nm]..
  • Easy-to-Use - It has Brushless Fein PowerDrive motor, powerful and maintenance-free for maximum efficiency and service life. It is compact 5-7/8 inches [150 mm] length (without drill chuck)..
  • Multipurpose - It has QuickIn accessory interface for all QuickIn accessories for fast change between applications. It has ideally-graduated speeds for working with step drills..
  • Specifications - Battery Voltage: 12 V, Battery Capacity: 3 Ah, No Load Speed: 400/1,300 RPM, Motor: Brushless, Gearbox: 4-Speed, Capacity in steel: 1/2", Capacity in wood: 1-9/16", Tapping: 5/16".
Check Stock

Tap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set MT3

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Check Stock

Shop Fox M1099 10 by 26" Bench athe, Metal, Large

  • ...ssional capabilities at an incredible price. An indispensable workhouse in workshops for many years and featuring a small footprint suitable for home, commercial and educational use. Ideal for all kinds of precision metal work including: turning, facing, grooving, parting, threading, drilling, boring, knurling, and tapping. A true metalworking tool for professional outcomes vs. a look-a-like toy..
  • Machine features - The LittleMachineShop.com exclusive version of this machine includes a full 14" bed length for longer work pieces, a 1/3 HP variable speed spindle motor (with spindle speeds from 100 - 2500 RPM) and 2 speed ranges for low speed torque, Zero-settable hand wheels graduated in 0.001" on cross slide and compound rest, 4-way indexing tool post set for 5/16" (8 mm) tools, E-stop safety power switch, Rear apron shield, and backsplash..
  • Extended threading capability - A 16 TPI reversible lead screw for right-hand and left-hand threads, standard threading dial, and real top and bottom half-nuts, allow you to create every American Standard Unified inch screw thread from 4 to 80 threads per inch. With the extra 21 tooth change gear (included) you can create every American Standard Metric thread from 0.3 to 8.0 mm pitch..
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

Mophorn 7x12 Inch Luxury Version Metal Lathe 550W Precision Bench Top Mini Metal Milling Lathe Variable Speed 50-2500 RPM Nylon Gear with A Movable Lamp (7x12 inch)

  • Sturdy Iron Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection.
  • Infinitely Variable Speeds: Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included.
  • Accurate 3-jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp, 1x 4-Jaw Independent Chuck, 1x Quick Change Tool Post and 4x Engineers Measuring Kit are included.
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound res....
Check Stock

aiyun 6 Pack Titanium Combination Tap Drill Bit Set, Thread Tap Drill Bits Set M3-M10 Metric Drill and Tap Set

  • [What You Will Have] Set of 6 metric tap drill bit set M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately.
  • [Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency.
  • [Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
  • [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • [Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please c....
Check Stock

HNBun 1/32

  • HIGH QUALITY: Mt2 taper drill chuck made of durable high speed steel, corrosion and rust resistance.
  • drill press chuck compatible with impact drill and different power tool electric drill.
  • DIMENSION: Capacity 1/32" - 5/8", Mt2 Drill Chuck Overall Length: 93mm (3.7). Accuracy: 0.005", Chuck Mount : JT33.
  • PROFESSIONAL TOOL: High quality triple grip drill chuck accepts accessories with 1-16mm shanks, securely holds a wide range of twist drill bits, step drill bits, paddle bits.
  • MULTIFUNCTION: Drill chuck adapter suitable for centering, drilling, tapping, reaming operation. For portable, bench or floor type drill press.
  • WARM TIP: The mt2 drill chuck can NOT be used counterclockwise.
Check Stock

Hitachi WH10DFL2 12-Volt Peak Cordless Lithium Ion Impact Driver Kit (Lifetime Tool Warranty)

  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
  • Covered by Hitachi's Lifetime Lithium Ion Tool Warranty & 2 Year Lithium Ion battery warranty.
  • Powered by Lithium Ion battery technology for fade-free power and lighter weight than traditional NiCd batteries.
  • 955 inches/pounds of driving torque for heavy applications like tightening carriage bolts, driving lags and sinking deck screws.
  • Tightens and loosens small screws, tapping screws, bolts and nuts.
  • Impressively lightweight at only 2.2 pounds and compact at less than 6 inches in length.
  • Faster impact driving with a no-load speed of up to 2,700 RPM and a 3,200 BPM impact rate.
  • Optimized handle dimensions for a secure grip and ergonomic comfort in all hand sizes.
  • LED light effectively illuminates dark work areas.
  • Quick change 1/4 inches hex chuck for simple bit replacements.
Check Stock

aiyun 6 Pack Drill Tap Metric M3-M10 Tap Set Metric Drill Taps for Steel Aluminum, Sheet Metal and Other Hard Metal Thin Plates(HSS6542)

  • [What You Will Have] Set of 6 tap drill set metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5.
  • [Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on aluminum, sheet metal and other hard metal thin plates, greatly save processing steps and time costs, improve working efficiency.
  • [Material] HSS6542 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
  • [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • [Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
Check Stock

QWORK Drill Chuck Converter, 2 PCS 0.3-6.5mm Hex Shank Keyless Drill Chuck Quick Change Adapter Converter with 1/4\ Hex Shank

  • Installation size: General hexagon handle input connection rod clamps 0.3mm to 6.5mm drill bit..
  • Universal Hex shank: For power drill convert impact driver to hold non-quick change drill and driver bits instantly..
  • Ideal Accessor: Thread quick change adapter with 1/4" Hex Shank, easily into the power drill..
  • Easy to use: Easily lock and release drill bits, no chuck key needed..
  • Package include: 1* Black Drill Chuck + 1* Silver Drill Chuck..
Check Stock