Reviews Tapping Disruption Solutions

Adidas ThinTech EXP Golf Spikes | Silver

  • Lower profile – New generation low profile thintech EXP cleat design – 13% lower to the ground..
  • Traction/stability – 75% increase in leg tip surface area providing increased stability, traction, cleat durability and reduced green disruption..
  • Lightweight – PINS IV system, coupled with the new thintech EXP cleat design, provides a 15% lighter system..
  • PINS IV system – at 3.5 mm, thintech EXP is the lowest to-the-ground attachment system in the industry..
  • Green-friendly – Increased leg deflection angles for greater dynamics and less disruption..
Check Stock

adidas THiNTech Replacement Bulk Spike Cleats 20pcs, Black

  • 20 Individual Adidas THINTECH spikes are bulk packed.
  • Green-friendly – Increased leg deflection angles for greater dynamics and less disruption.
  • Lower profile – New generation low profile thintech EXP cleat design – 13% lower to the ground.
  • Traction/stability – 75% increase in leg tip surface area providing increased stability, traction, cleat durability and reduced green disruption.
  • PINS IV system – at 3.5 mm, thintech EXP is the lowest to-the-ground attachment system in the industry.
Check Stock

CLUE: Dungeons & Dragons

  • 6 custom weapons: Vorpol Sword, Dagger of Venom, Ring of Magic Missiles, Flaming Battle Axe, Staff of Power, Mace of Disruption.
  • 6 Suspects: Regdar the Human Fighter, Lidda the Halfling Rogue, Mailee the Elf Wizard, Nebin the Gnome Wizard, Tordek the Dwarf Fighter, Ember the Human Monk.
  • Original artwork on packaging and game board.
  • 6 Suspects: Regdar the Fighter, Lidda the Rouge, Mailee the Wizard, Nebin the Gnome, Tordek the Dwarf, Ember the Monk.
Check Stock

Bare Republic Baby Mineral Sunscreen & Sunblock Stick, Preserves Baby's Natural Skin Balance, Broad Spectrum SPF 55, Reef Friendly, 0.5 Oz

  • MINERAL BABY SUNSCREEN STICK. Get powerful mineral lotion protection without the mess! Our exclusively designed soft sponge-top stick allows you to gently glide on full strength mineral sunscreen lotion in an all-new texture that spreads evenly and easily–no messy hands!.
  • SAFE FOR BABY. Infused with Calendula, Olive, and Avocado Oils, the mild, soothing non-nano Zinc Oxide based formula is clinically shown to support and prevent disruption to baby’s natural skin balance..
  • ENVIRONMENT FRIENDLY. Our vegan, better-for-you sunscreens are proudly free of chemical actives, synthetic fragrances, and parabens, and help preserve marine ecosystems by being Hawaii Reef Compliant (Act 104)..
  • GOOD, CLEAN FUN. At Bare Republic, it’s our promise to stay dedicated to enhancing your everyday adventures with clean and simple products you can trust. No gimmicks, just good clean fun..
  • OUR STORY. We're a group of friends from California with a shared passion for health, wellness and adventure. Seeking affordable and wearable sunscreen, our quest began to create simple, safe and effective sun protection solutions for the entire family. Packaging may vary..
Check Stock

Adidas F50 Adizero Junior Lionel Messi Soccer Cleat Solar Gold Sz 5.5

  • 20 Individual Adidas THINTECH spikes are bulk packed.
  • Green-friendly – Increased leg deflection angles for greater dynamics and less disruption.
  • Lower profile – New generation low profile thintech EXP cleat design – 13% lower to the ground.
  • Traction/stability – 75% increase in leg tip surface area providing increased stability, traction, cleat durability and reduced green disruption.
  • PINS IV system – at 3.5 mm, thintech EXP is the lowest to-the-ground attachment system in the industry.
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

Priority One Vitamins Biofilm Phase-2 Advanced 60 Vegetarian Capsules Exclusively formulated by: Dr. Paul S. Anderson - Disruption of Advanced biofilms*

  • Exclusively formulated by Dr. Paul S. Anderson for Priority One Vitamins. This supplement is specifically formulated for the disruption of advanced biofilms.*.
  • Biofilms form and evolve from early (“Phase-1” weaker) to later (“Phase-2” stronger) forms. This supplement was formulated using the most recent scientific data on biofilm disruption in advanced (Phase-2) cases.*.
  • Combination of bismuth subnitrate, alpha lipoic acid, and black cumin..
  • Clinical Strength Supplements, Physician Formulated.Natural Ingredients. Natural formula. This product is non-GMO. Manufactured in an FDA inspected, cGMP facility located in the USA..
Check Stock

US Stock M3-M16 Electric Tapping Machine 375rpm 110V Flex Tapping Arm Machine ANSI Full Set Tap Collets Holder Included

  • M16R electric tapping machine has manual, automatic and gap 3 modes for your choice. Automatic mode can control the depth of tapping effectively to realize blind tapping.
  • Tapping angle: Universal. Tapping Capacity Stainless steel/Steel: M3-M16, Aluminum: M3-M16, Working Area Horizontal: 1045mm(41.1inch) Weight: 32KG (70.5lb.) Vertical: 400mm adjustable.
  • Main parts for tapping machine, import servo motor, HD human machine interface, high-precision cantilever bracket, universal head(tapping for vertical/horizontal), import tap collet(standard).
  • Applicable materials: aluminum, copper, A3 steel, 45 steel, cast iron, pig iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials, plastic and wood and other materials.
  • 1-year warranty. Free shipping to your door. Standard equipped tap collet size: ANSI standard M3,M4,M5,M6-M8,M10,M12,M14 and M16. 8PCS in total. If you need ISO/JIS or DIN standard collet, please leave a message.
Check Stock

Belei Beauty Solutions Deluxe Mini-Size Skin Care Set, All Skin Types

  • Formulated without sulfates, fragrances, parabens, pthalates.
  • Dermatologist tested. Formulations not tested on animals..
  • Refine your skin and reduce the appearance of fine lines and wrinkles with these hydrating solutions for beautiful skin.
  • When using the product, you may need to prime the dispenser by forcefully tapping the bottom of the bottle on a surface, then pumping the dispenser upside down 20-25 times..
  • Contains mini versions of four Belei favorites: Retinol Refining Moisturizer (0.5oz), Triple-Peptide Eye Cream (0.10oz), Hydrating Hyaluronic Acid Serum (0.5oz) and Ferulic Acid + Vitamins C and E Serum (0.5oz).
  • Designed for all skin types. Use at night or during the day, alone or under makeup. For daytime use we recommend following with sun protection.
  • Satisfaction Guarantee: We’re proud of our products. If you aren’t satisfied, we’ll refund you for any reason within a year of purchase. 1-877-485-0385.
  • Made in the U.S.A from U.S. and imported ingredients.
Check Stock

uxcell Thread Milling Taps 7/16-14 UNC High Speed Steel HSS 4 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

  • accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
  • Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Check Stock

uxcell Thread Milling Taps 3/8-24 UNS High Speed Steel HSS 3 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

  • accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
  • Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Check Stock

uxcell Thread Milling Taps 1/2-13 UNC High Speed Steel HSS 4 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

  • accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
  • Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Check Stock