Reviews Tapered Tube Reamer

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

2 Pieces Inner-Outer Reamer Pipe and Tube Deburring Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes (Red)

  • Package content: you will get 2 pieces tube reamer in red color, which are nice tools applied for removing burrs from pipe edges, and enough quantity can meet your daily needs or replacement.
  • Durable material: the main body of the pipe reamer is made of plastic, which is strong and durable, and the internal deburring blade is made of hardened alloy steel, which can provide you with long-lasting use.
  • Size: the reamer is suitable for the diameter of pipes from 3/16 inch to 1-1/2 inch, and it can be applied for pipes of various materials such as PVC, PPR, copper, aluminum, brass, aluminum and so on.
  • Easy to use: the alloy steel blade can cut copper, aluminum, brass and plastic pipes and other types of tubing quickly and accurately, and you can rotate the screw switch to adjust the distance of the cutting wheel back and forth.
  • Convinent design: the burrs can be removed in both clockwise and counterclockwise directions, and the tube reamer is suitable for the inside and outside of the pipeline to use.
  • The screw of the pipe cutter can easily control the cutting pressure for clean cutting.
Check Stock

4Pcs Drill Bridge/Construction Reamer Bit Set 3/8 1/2 5/8 3/4 with 1/2 Shank HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole with Aluminum Box

  • What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
  • Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
  • Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
  • Includes: 3/8" (fits 3/8'' shank collets), 1/2", 5/8" and 3/4" (fits 1/2'' shank collets).
  • Design: Tapered point design allows reamer bits to enter irregularly overlapping holes, aligning bolt holes.
  • three symmetrically placed flats on shank provide a secure grip for portable power and air tools.
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock

Fafeicy Pipe Reamer Stainless Steel Tube Deburr Chamfer Tube Remove Burr Tool 5/16inch - 2 1/8inch for Hard Pipes

  • Professional copper and aluminum tube trimming devices, multi-blade alloy steel core designed, taking both internal and external trimming chamfering....
  • Adapting to most working environment, can be used in a variety of working conditions, to meet your needs..
  • This pipe reamer is a great tool used for deburring or chamfering pipes. The quality of the pipe reamer is guaranteed..
  • The designed is clever, simple and practical.
  • the pipe reamer can effectively remove pipe burr..
  • APPLICATION: Suitable for hard pipes such as stainless steel, aluminum alloy shell non-slip..
Check Stock

ICOOL Inner-Outer Pipe Reamer/Tube Deburring Tool 3/16 to 1-5/8 inch for Copper PPR PVC Brass Aluminum Soft Steel Tubing and Pipes

  • 【Capacity】The reamer is suitable for the diameter of tubing and pipes from 3/16 to 1-5/8 inch..
  • 【Versatile Tools】Prepares for tubing soldering, removes burrs from sharp edges, such as copper, PPR, PVC, brass, aluminum, soft steel tubing and....
  • 【Efficient Tools】Specifically designed for various tubing with tight space. The reamer is suitable for the inside and outside of the pipeline to....
  • 【Sturdy Design】Long wearing steel blades for a long service time. Grooved durable hard plastic body for better grip..
  • 【Multiduty】Reamer can work perfectly especially in tube cutting, deburring copper pipes in the air conditioner installation and vehicle repair..
Check Stock

YaeKoo 2 pcs Tapered Reamer T Handle 6 Fluted Chamfer Bridge Pin Hole Hand Held Reamer Sizes 1/8\-1/2\ (3-13mm) & 5''-5/8'' (5-16mm) Handle Drilling Tools

  • The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels.
  • The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort.
  • Reamer T handle for easy reaming.The removable handle facilitates compact storage..
  • Material of Taper Reamers: high carbon steel heat treatment, longer service life.
  • Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13mm) size and 1/5" -5/8 "(5mm -16mm) size.
Check Stock

LENOX Tools Replacement Wheel for Tubing Cutters, Copper Cutting, 2-Pack (21192TCW158C2)

  • 4-roller tracking system keeps the tube from threading when using a tube cutter.
  • Cleanly and easily deburr pipes with the replaceable machinist's reamer.
  • Full-stop feed system prevents tube cutter wheels and rollers from coming into contact.
  • Change out tube cutter wheels quickly and easily.
  • Store an extra cutting wheel in the handle.
Check Stock

VEVOR Pipe Bender, 7 Dies 1/4-7/8 Inch Refrigeration Ratcheting Tube Bender Kit, 90° Tubing Bender with Reverse Bending Attachment for HVAC

  • ...m, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • 1/4"-7/8" Bending Range: We provide 7 Elbow diameter range for pipes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6, 8,10,12,16, 19, 22mm). Tubing cutter with reamer and extra blade capacity:1/8 to 1-1/8-inch (3-28mm). The bending heads can meet different usage needs, making your work more convenient..
  • Kit Included: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Inner Outer Reamer x 1, Carrying Box x 1, Manual x 1. Quality machined aluminum alloy is for strength and durability..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 6-22 mm tubes in both forward and reverse to 90 degrees. It allows tight 90 degree angles to be made easily out of a wall or other difficult places. Mechanical ratchet for fast and precise bending..
Check Stock

Wostore Double Flaring Tool Kit for 3/16″-5/8″ 7 Dies Automotive Line Tubing Cutter with Replacement Blade and Remear

  • 【Set Included】Flare bar x 1, flaring cone x 1, flare adapters x 7, tubing cutter x 1 and carrying case x 1..
  • 【Multifunction】Double or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration. Suitable for most soft steel, aluminum, brass and copper pipes.Pipe cutter has 2 rollers secure the tube better.
  • Fold-away slide lock tube reamer deburring blade for a better connection.
  • 【Application】Double automotive flare tool kit suitable: 3/16”, 1/4”, 5/16”, 3/8″, 7/16″, 1/2″, 5/8″(5,6,8,10,12,14,16mm).
  • Tubing cutter has a 1/8 to 1-1/8 inches (3-30mm) capacity with inner outer reamer..
  • 【Durable Design】Yoke Heat-treated steel material for maximum strength and longevity that resists corrosion.Swivel constructed from chrome-plated alloy steel to reduce friction..
  • 【Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruction includes for use easily..
Check Stock

Wostore Double Flaring Tool Kit for 3/16"-5/8" 7 Dies Automotive Brake Line Tube Cutter with Replacement Blade and Reamer

  • ...on】Double or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration.Suitable for most soft steel,aluminum,brass and copper pipes.Pipe cutter has 2 rollers secure the tube better.
  • Fold-away slide lock tube reamer deburring blade for a better connection.
  • 【Application】Double automotive flare tool kit suitable: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8"(5,6,8,10,12,14,16mm).
  • Tubing cutter has a 1/8 to 1-1/8 inches (3-30mm) capacity with inner outer reamer..
  • 【Durable Design】Yoke Heat-treated steel material for maximum strength and longevity that resists corrosion. Swivel constructed from chrome-plated alloy steel to reduce friction..
  • 【Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruction includes for use easily..
Check Stock

nuwfrog Tubing and Pipe Cutter 1/8 to 1-3/8 Inch with Extra Blade and Reamer for PVC Thin Stainless Steel Tube, Metal,Brass - Copper Pipe Tubing Cutter

  • 【Efficient and convenient】 The operation of cutting copper, brass, aluminum，thin stainless steel,PVC,PE tubes from 1/8"-1-3/8" (3-35mm) O.D. becomes more easy, clean and efficient..
  • 【Fine workmanship】High-quality alloy steel grinding blades, extremely sharp.The body is made of lightweight,durable aluminum alloy casting..
  • 【Versatile】This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops..
  • 【Ergonomic design】Knob provides a firm grip. Cutting tubes become a comfortable and quick task..
  • 【EXTRA blade and Reamer】Our pipe cutter also comes with an extra blade and a reamer .so you can cut as much steel tube as possible and help you clean the pipe. We truly believe our Tubing Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence..
Check Stock