Reviews Taper Pins

GEARWRENCH 27 Pc Punch and Chisel Set - 82306

  • Chisel For Cutting Rivets, Bolts, and Nuts.
  • Pin Punch For Final Removal To Drive Out Pins and Rivets.
  • Center Punch For Marking Center Lines and Pilot Drill Locations.
  • Long Taper Punch To Install and Remove Pins and Shafts and To Align Holes.
  • Starter Punch For Both Starting and Installing Pins and Rivets.
Check Stock

420 Stainless Steel Spring Pin, Plain Finish, 1/8\ Nominal Diameter, 2\ Length (Pack of 100)

  • Installed by two easy operations, just drill and drive.
  • Type 420 Stainless Steel is stronger than 18-8 stainless steel and more corrosion resistant than zinc-plated and plain steel.
  • Superior to and used in place of drive pins, taper pins, collar pins, etc..
  • Permit a wider tolerance because of the flexibility.
Check Stock

Wheeler Gas Block Taper Pin Removal Tool for Tactical Sporting Rifles Gunsmithing, Cleaning, Rebuild and Maintenance

  • SPECS: Compatible with A2 front sights, dual taper pins, and Smith and Wesson single-taper pin gas blocks.
  • INCLUDES: Finishing punch and starter punch.
  • DESIGN: Constructed from durable tool steel for longevity.
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler. Please contact Wheeler customer service for assistance.
Check Stock

Hilitchi 25 Pcs Complete Models Potentiometer Assortment Kit with 5K-100K Ohm Knurled Shaft 3 Terminals Linear Taper Rotary Potentiometer w Knob Nuts and Washers

  • 63 pcs Potentiometer Assortment, contains type 'A' logarithmic taper, 'B' linear taper and 'C' reverse logarithmic taper.
  • Includes 1K, 5K, 10K, 20K, 50K, 100K, 250K, 500K, 1M, B type comes 3 pcs each, A and C type each 2 pcs.
  • 3 pins, Power: 0.2W, Axis Diameter: 6,3mm (0.24 inch), Axis Length 16mm (0.6 inch), Axis without Thread 8mm (0.3 inch), horizontal terminals, knurled split shafts.
  • Nuts and Washers are included, 10-15 black knobs come as a bonus.
  • Each type comes accordingly sorted in a labeled recyclable PP plastic box.
Check Stock

Ajax Tools 650 Broad Head Bull Pin, 1-1/4-Inch X 13 3/4 inch, Made in USA

  • Forged and heat-treated high quality allow steel to provide a large striking surface and reduce chance of pin slipping from hand when aligning holes..
  • Squared shoulder below head provides surface for the use of wrench to loosen wedged pins..
  • Long, even taper reduces binding and hang-up.
  • Dimensions: Overall Length - 13-3/4" / Standard Diameter - 1-1/4" / Point Size - 5/16" / Taper Length - 10".
Check Stock

OOZY Reboot Pedals Bronze

  • HIGH FUNCTIONALITY WITH STYLISH LOOKS: Our slim, 12mm race and freeride pedal lets you maximize pedaling clearance and mountain biking....
  • LIGHTWEIGHT: Weighing 360 gm each and made of aluminum, these pedals are pretty lightweight..
  • GETS IT'S STRENGTH FROM HOLLOW TAPER STAINLESS STEEL AXLES: Your pedals are an extension of your feet. They should never hinder your performance or....
  • PREASSEMBLED PINS: Our pedal straps are made from the highest grade materials and come with 18 preassembled pins for a perfect fit. That means no more....
  • FITS MOST BIKES: Our pedals are recommended for ASTM 5, All mountain, Trail, Enduro, free ride, DH, E-Bike..
Check Stock

Broad Head Bull Pin, 1-1/4-Inch X 13 3/4 inch, Made in USA

  • Top diameter 1-1/4", point diameter 5/16", 13 3/4" long, Made in USA.
  • Broad head is forged and heat-treated to provide a large striking surface and reduce chance of pin slipping from the hand when aligning holes..
  • Resistance to "mushrooming" permitting longer service life vs conventional aligning pins..
  • Squared shoulder below brand head provides surface for the use of wrench to loosen wedged pins..
  • Long, even taper reduces binding and hang-up..
Check Stock

NewkeepsR 2PCS-16G(1.2mm) 316L Steel Calor Style Taper Insertion Pin for Ear/Nose/Navel/Nipple/Lip/Eyebrow Stretcher, Body Piercing Stretching Kit Assistant Tool

  • ... helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 18g to 16g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk a bit or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② Push piercing bar through slowly to allow time to adjust. ③ Can be autoclaved and reused as steel taper more comfortable and durable.④ Why no thread inside the hole? as your external thread bar isn't made from our shop,I'm not sure if both end threads match,so holding bar will be better..
  • 316L Implant Grade Stainless Steel Material. Insertion Taper's option with 20g/18g/16g/14g/12g/10g/8g,Please choose the size that suits you best..
Check Stock

TEKTON 1/16 Inch Roll Pin Punch | 66061, 1/16 in.

  • Reverse taper shaft with self-centering guide ball tip drives out or inserts hollow pins without deforming them or sticking in workpiece.
  • Straight and true, tip is precisely machined to meet exacting tolerances.
  • Individual heat treatment allows careful control of tip hardness and temper of striking end.
  • Classic natural finish has a dry-touch, rust-preventative coating.
Check Stock

NewkeepsR 2PCS-14G 1.6mm 316L Steel Calor Style Taper Insertion Pin for Ear/Navel/Nipple/Lip/Tongue Stretcher Body Piercing Stretching Kit Assistant Tool

  • ... helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 16g to 14g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk "a bit" or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② Push piercing bar through slowly to allow time to adjust. ③ Can be autoclaved and reused as steel taper more comfortable and durable.④ Why no thread inside the hole? as your external thread bar isn't made from our shop,I'm not sure if both end threads match,so holding bar will be better. ⑤ Can't fit to any threadless piercing jewelry..
  • 316L Implant Grade Stainless Steel Material. Insertion Taper's option with 20g/18g/16g/14g/12g/10g/8g,Please choose the siz....
Check Stock

Buck n Bear Custom Handmade Damascus Steel Cowboy Hunter Fixed Blade Knife G10/Stag Handle

  • The Cowboy Hunter Knife from Buck n Bear features a drop point 256-layer Damascus (1095 & 15N20) stainless steel blade with a slight recurve.
  • The polished full tang is covered with polished stainless steel, G10 and stag horn scales with brass pins..
Check Stock

Glarks 40Pcs B5K B10K B20K B50K B100K Ohm Knurled Shaft Linear Rotary Taper Potentiometer with Nuts Washers and 3 Color Alloy Knob for Arduino

  • ♛【What You Get】: In this potentiometer set, it include 20pcs B5K B10K B20K B50K B100K Ohm single linear rotary taper potentiometer, 20pcs red....
  • ♛【Durable Material】: The single linear potentiometer is made of metal and carbon film, very stable and durable. The pins are fit in the....
  • ♛【Product Feature】: These are single linear rotary taper potentiometer, 3 terminals, single linear, with standard WH148 knob, 3 color caps for....
  • ♛【Wide Application】: Widely used for volume control in audio applications, guitar, amplifier, audio, lamp. Suitable for DVD player, household....
  • ♛【Quality Assurance】: If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return....
Check Stock

Titan Attachments 1 Cubic Yard Self-Dumping Hopper, Fork Lift Operated, Rated 6000 LB, Material Handling

  • Fork mounted trash hopper fits 36-inch pallet fork blades.
  • Flip-over handle latch secures the hopper in the closed position / Handle latch allows the trip lever to open for forward dumping.
  • Base with laser-cut track and taper pins for wear resistance.
  • Reinforced front body angle for optimum strength.
  • Made from durable steel in order to hold up to 6,000-pound capacity.
Check Stock