TB Woods 3020 TL302050MM Taper Lock Bushing, Cast Iron, 50 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2517 TL2517138 Taper Lock Bushing, Cast Iron, Inch, 1.375\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1008 TL100858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1108 TL110822MM Taper Lock Bushing, Cast Iron, 22 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2517 TL251758 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2517 TL2517238 Taper Lock Bushing, Cast Iron, Inch, 2.375\ Bore, 1200 lbs/in Torque, Standard Design, Shallow Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 2012 TL201230MM Taper Lock Bushing, Cast Iron, 30 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1610 TL161025MM Taper Lock Bushing, Cast Iron, 25 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockTB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check Stock
POWERTEC 71035V Table Saw Angle Cutting Jig for Creating Tapered Cuts | 24-Inch Lightweight Aluminum Rails and Laser Etched Scale, 15 Degrees of Taper, 1 PK
- INCLUDES: (1) Table Saw Taper Cutting Jig with 24” rails with work stops, ergonomic handle, lock knob and laser etched scale.
- FUNCTION: Used as a taper cutting guide for table saws, this easy-to-use carpentry tool helps you make long cut cuts at angles from 1” per foot (4.8 degrees) or up to 3” per foot (15 degrees).
- VERSATILE: Perfect for making angled cuts, projects that require a little taper or other woodworking projects such as building kitchen table legs, chairs, wood shelves, wedges and more..
- PREMIUM: Made with an extremely durable, yet lightweight extruded aluminum construction that offers anti-corrosive properties and a high strength-to-weight ratio for heavy-duty applications.
- FEATURES: Sturdy construction and design with extruded legs with anodized finish, tapered handle with rounded head and textured finish, improved laser engraved 17 gauge steel hinge plate.
Check StockNOAHWOOD X Fingerbird PRO Fingerboards 6-Layer Colour Maple Wooden PRO Concave Handmade Deck 8.0 + NW Prince 34mm Trucks + NW ii Logo Handmade Wheels 100x34mm Apple Red Sewing Machine
- Deck concave: NOAH TEAM 8.0 PRO 360flip Deep Concave Deck, DECK production mold made by professional players, after several years of continuous test....
- NOAHWOOD ii handmade wheels by Noah team. By Small manual lathe processing. Player ask why should we take the trouble to do it? We can only say it is....
- The suite provide a professional second-generation 34mm Trucks, Upgrade LOCK NUT, Pivot Cup. Competent for all kinds of high level moves, LOCK NUT....
- The suite accessories : up to 40 parts and detailed instructions inside the package, fully satisfy the Beginner and PRO Player DIY assembling the....
- For safety reasons,we only provide a more security and small cross taper , the larger cross taper (dimension :1.5-3mm) and the blade for cutting the....
Check StockLimited Edition - Ontario Knife Company 8862BONE Rat-2 Bone Color Folding Knife AUS 8
- ✅ The handle features textured bone nylon 6 scales with an open-built steel linerlock frame.
- ✅ Ambidextrous with dual thumb studs and a 4-way reversible pocket clip.
- ✅ Handle Material: Nylon 6 Handle Color: Bone.
Check StockSeaLux Marine AISI 316 Stainless Steel Heavy Duty Class III Bow Eye with Taper Safety Lock Nut 1/2' (M12) Stock (4-3/4') Length, 6000 lbs Capacity
- Unique Design with Taper Security Lock Nut, To be used together with class 3 chain and padlock to ensure safe locking and to fulfill insurance regulations..
- Constructed of polished AISI 316 stainless steel, to minimize potential corrosion..
- This Bow Eye measures approximately 3" W x 4-3/4" H x 3/4" D overall and has (2) approximate 1/2" diameter x 2-3/8" long threaded bolts with 1 7/8" apart center on center..
- Bow Eye Opening: 1 3/4” Stainless Steel Taper Security Nuts, Washers and installation instruction are included.
Check Stock
