Reviews Tap Taper Interface Reamer

Beer Tap Faucet Handle Black - Set of 10

  • WHAT WILL YOU GET - You will get a M3-M12 tap wrench. Fit 1/16" - 1/2" / 2.5mm - 12mm capacity size. Overall size(closed) is 19.3cm x 2.3cm x 1cm/7.6inch x 0.9inch x 0.4inch(LxWxH). Shank diameter is 8mm/0.3inch..
  • HIGH QUALITY TAP REAMER - The adjustable tap wrench is made of high-quality steel, with high hardness, strong wear resistance and long service life. The end of the tapping wrench tool is knurled for easy and firm grips. The hand wrench tool has one rigid handle and one adjustable jaws, which can easily and firmly clamp the tools..
  • MULTIPLE USE - The tap reamer wrench is designed for use with small tools that require manual rotation, such as taps, reamers, drill bits, and screw extractors. Manual operation is very simple and convenient, which can improve your work efficiency. It is also very suitable for DIY tapping..
  • EASY TO USE - When using a tapping wrench, apply even force with both hands. The wrench and the tap should form a 90-degree angle, and the tap and the threaded bottom hole are perpendicular to each other, rotate the adjustable metal tap handle reamer wrench in a certain direction..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top pr....
Check Stock

2Pcs High Carbon Steel Straight Shank Morse Taper Reamer Rough + Fine Hand Reamer Set Replacement(MT2#)

  • HIGH QUALITY-- Morse Taper Reamer is made of high carbon steel, it is not easy to wear and has a long service life..
  • 2PCS-- Each set of two reamers, one rough and one fine, meets different work requirements..
  • APPLICATION-- Available in a variety of models to meet most daily work needs. A perfect replacement for the broken or worn one..
  • GOOD PERFORMANCE-- Morse Taper Reamer features fine workmanship, high precision, high cutting efficiency..
  • 5 OPTIONAL MADEL-- Optional Model: MT1#, MT2#, MT3#, MT4#, MT5#, meet your different requirements.
Check Stock

2/0 Taper Pin Reamer Kit

  • 1 - 2/0 Spiral Flute taper reamer (Bosnian made).
  • 5 - 300 series Stainless steel 2/0 taper pins 3/4" long.
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56059, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56068, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

7/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56067, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

3/4\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56063, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

7/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56017, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 7/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock