Reviews Tap Hole Block

2 Pcs Stainless Steel Kitchen Sink Tap Hole Cover ，Kitchen Faucet Hole Cover ，Faucet Hole Cover，Sink Tap Hole Cover，Kitchen Faucet Hole Cover Stainless Steel (1.2 to 1.6 Inch in Diameter)

  • Material: Sink Tap Hole Coveris made of durable stainless steel and plastic,to prevent rusting ​and will not fade ，Can be used for a long time。.
  • Applicable size： Kitchen Faucet Hole Cover for holes between 1.2 to 1.6 inch. The thickness of the sink should be less than 0.4 inch. (This is not long enough for granite counter tops) Most household Kitchen Sink Hole Cover are standard sizes.please check its size before buying..
  • Easy to install：Kiut the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw,It covers the spray hole, no need tools, Kitchen Sink Tap Hole Plate Stopper Cover ​is equipped ​with a rubber gasket to achieve a good seal and avoid leakage..
  • Stainless Steel Kitchen Sink Tap Hole Cover device is decoration and leakage prevention,preventing water from leaking onto the floor,keep the kitchen clean and tidy.Kitchen Sink Tap Hole Plate Stopper Cover very small, which convenient to store and don not take too much space..
  • We believe that our Premium Sink Tap Hole Cover，will exceed your expectations. If you have questions, please contact us any time. We will try our best to solve your problems..
Check Stock

Powerbuilt 14mm Back Tap Thread Repair Tool - 640811

  • Back-Tap's patented collapsible design allows it to engage be placed through the spark plug hole and into the chamber.
  • The Back tap repairs the damaged thread as it is drawn up through the spark plug hole.
  • Made in USA. Meets or exceeds ANSI standards..
  • Back-Tap 14 millimeter thread straightening tool for spark plug fouled threads.
  • Collapsible design allows it to engage be placed through the spark plug hole and into the chamber.
Check Stock

BOSCH BDT1032 10-32 Plug Tap and No 21 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT632 6-32 Plug Tap and No 36 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT1024 10-24 Plug Tap and No. 25 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT516F18 5/16-18 Plug Tap and Size F Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

Machine Tap 5 PCS HSS Spiral Point Titanium Coated Tap Machine Screw Thread Metric Tap Set M3-M8 M3x 0.5 tap M4 x 0.7 tap M5 x 0.8 tap M6 x 1.0 tap M8 x 1.25 tap

  • ✮ [PREMIUM MATERIAL]- This metric tap set is made of high quality HSS (High Speed Steel) with titanium coating, highly hard, sharp, rustproof, anti-corrosive, durable, ensuring long time use.
  • ✮ [DIMENSION]-5 PCS machine screw thread tap set includes: M3x 0.5 tap, M4 x 0.7 tap, M5 x 0.8 tap, M6 x 1.0 tap, M8 x 1.25 tap.
  • ✮ [FUNCTION]- Nice spiral pointed metric tap set used to create screw threads on wood, plastic, aluminum and more materials and remove chips simultaneously. The machine screw thread tap set have 5 different size spiral pointed taps for processing through-hole threads and deep-hole threads to satisfy your various needs.
  • ✮ [APPLICATION]-Great tap set for auto repair, household projects and machinery where metric threads are specified.
  • ✮ [USAGE]- This machine tap set is suitable for drill presses, tapping machines, CNC and milling machines. The machine tap set can be used with tapping oil to get better quality..
Check Stock

Joy Fishing Game

  • Tap to randomize tiles and recreate back the image.
  • Tap to find the same image based on memory.
Check Stock

(Qty 1280) Masonry Screws 1/4” x 2-1/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (15.99 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 3/16” x 1-3/4” Blue, P/Flat Head Concrete Screws Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Diamond Point Screw Concrete Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

Acrux7 14mmx1.5 HSS Right Hand Thread Tap, Metric Thread Tap, Thread Milling Tap M14 X 1.5mm Pitch

  • 【MATERIAL】-Made of made of high speed steel and are good for most general purpose applications,offering a combination of hardness and toughness for wear resistance.
  • Standard thread design,clear and tidy,provide rapid chip removal for efficient threading.
  • 【FEATURE】-Straight flute taps are used for through hole and shallow blind hole tapping.
  • Adjustable forward and reverse,ratchet rotation,compact and convenient.
  • 【NOTE】-Before tapping,confirm whether the diameter of the round hole is appropriate.
  • If the hole is too small for tapping,the tap will wear out more unnecessary,which will increase the risk of tap breakage.
  • 【APPLICATION】-The taps are used formanual equipment or special processing consoles,such as tapping machines,drill-in-one bench drills etc.
  • With this tap,you can finish tapping on stainless steel,iron,aluminum,copper,general steel and other materials.
Check Stock