Reviews Tamper resistant Fasteners Kit

NEIKO 10224A 1/4” Hex Extra Long Security Power Bit Set, 32 Piece, S2 Steel, 6” Long Tamper Proof Torx Bit Set, Phillips, Slotted, Tamper Proof Hex & Torx, PoziDriv, Spanner, Torq-Set, Tri-Wing

  • PREMIUM QUALITY BITS: Each extra-long security power bit is made of S2 steel for a hardness that reduces wear-outs and ensures longevity..
  • PRECISION BITS: Precisely machined bit tips in this screwdriver bit kit come with accurate size and chamfered bit ends that insert smoothly into fasteners and protect both bits and fasteners from damaged edges..
  • 6 INCH LENGTH: These long screwdriver bits are 6-inches long and ideal for working with electronic appliances..
  • STORAGE CASE: This long tamper proof torx bit set is packaged in a compact hard plastic storage case for easy transport..
  • INCLUDES 8 TYPES OF BITS: This security bit set comes with universal 1/4-inch hex shanks and a wide variety of bits including Tamper Proof Torx, Tamper Proof Hex, Tri-Wing, Spanner, Torq-Set, PoziDriv, Phillips and Slotted..
Check Stock

CASOMAN 10 Piece Spline Tip Bit Socket Set, M-Type, S2 and Cr-V Steel, Extra Long 4'' Length, M4-M18, XZN Triple Square Spline Bit Socket Set

  • Combination of premium S2 alloy steel bit and Chrome-Vanadium alloy steel sockets. Total length: 4 inch..
  • 3/8"Dr: M8, M9, M10, M12, M14 (tamper proof).
  • 1/2"Dr: M16 (tamper proof), M18 (tamper proof).
  • High strength chrome vanadium steel sockets provide superior torque for greater turning power with mirror chrome finish for corrosion resistance.
  • Precisely machined bit tips to ensure accurate size, chamfered bit ends insert smoothly into fasteners and protect both bits and fasteners from damaged edges.
  • It comes with a durable blow-molded carrying case. It comes with 1 year quality warranty..
Check Stock

5/16-18 Breakaway Nut Zinc (8 pieces)

  • These tri-groove Nuts are corrosion resistant 316 stainless steel, making the fasteners suitable for long term applications in harsh environments..
  • Common applications of 316 stainless steel fasteners include use on boats, docks, piers, and pools..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

1/4-20 Breakaway Nut Zinc (10 pieces)

  • These tri-groove Nuts are corrosion resistant 316 stainless steel, making the fasteners suitable for long term applications in harsh environments..
  • Common applications of 316 stainless steel fasteners include use on boats, docks, piers, and pools..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Anti-Theft License Plate Screws - Rustproof Fastener Kit with Theft-Proof Stainless Steel Screws, Nylon Screw Inserts, and Easy Installation Tools for Fastening License Plates (Stainless Steel)

  • ...actured our screws from Type 316 Marine Grade Stainless Steel. This is an upgrade to the dealer license plate screws and superior to lesser grades of stainless steel such as type 304 (which will eventually corrode) for corrosion resistance, especially in salty conditions..
  • MAXIMUM COMPATIBILITY – Our license plate fasteners are the standard size of 1/4″ diameter x 3/4” long self tapping screws that will fit most vehicles that use nylon/plastic screw retainers. Metal threaded holes require a different style screw so we recommend you check your vehicle application for compatibility..
  • EASY INSTALLATION – We designed this set of premium screws to be durable and easy to install. Simple installation with the included special tools makes them easy to use for enthusiasts and casual users alike..
  • NO-HASSLE MONEY-BACK GUARANTEE – This fastener kit is backed by our World Class 100% Money-Back Guarantee that you are fully satisfied with your product or receive your money back. All parts in this kit are guaranteed to work and last the lifetime of your vehicle..
Check Stock

Anti-Theft License Plate Screws - Rustproof Fastener Kit with Theft-Proof Black Stainless Screws, Nylon Inserts, and Easy Installation Tools for Fastening License Plates (Black Stainless Steel)

  • ...ufactured our screws from Type 316 Marine Grade Stainless Steel. This is an upgrade to the dealer license plate screws and superior to lesser grades of stainless steel such as type 304 (which will eventually corrode) for corrosion resistance, especially in salty conditions..
  • MAXIMUM COMPATIBILITY - Our license plate fasteners are the standard size of 1/4" diameter x 3/4” long self tapping screws that will fit most vehicles that use nylon/plastic screw retainers. Metal threaded holes require a different style screw so we recommend you check your vehicle application for compatibility..
  • EASY INSTALLATION - We designed this set of premium screws to be durable and easy to install. Simple installation with the included special tools makes them easy to use for enthusiasts and casual users alike..
  • NO-HASSLE MONEY-BACK GUARANTEE - This fastener kit is backed by our World Class 100% Money-Back Guarantee that you are fully satisfied with your product or receive your money back. All parts in this kit are guaranteed to work and last the lifetime of your vehicle..
Check Stock

Defender Security U 10817 Deadlock, Jimmy-Resistant, Single Cylinder Door Lock with a Satin Nickel Finish

  • ...ock is a surface-mounted, cross-bolt locking device which can be mounted to 1-3/8” to 2-3/8” thick, wood or metal doors. It can be installed inside or outside, on left- or right-hinged doors..
  • INCLUDES - This door lock includes an angled strike, a rim cylinder, two keys (keyed differently), a cylinder trim ring, fasteners, a mounting plate, instructions and a tamper-resistant shutter guard. This lock requires a 1-1/4” hole and uses Segal keyway..
  • INSTALLATION TIP - Snap-off or cut-off end sections of tailpiece as needed, if it is too long for your door. Having the tailpiece too long can negatively affect the performance of the lock. Use pliers to snap-off, a hacksaw or small disk to cut-off, and a file to remove sharp edges and burrs..
Check Stock

KAIFNT K001 Torx Plus 5-Point Tamper-Proof Security Bit Set, 7-Piece

  • Five-point head and hole for security fasteners.
  • This set matches for most standard tamper resistance star 5-point screws as opposed to the common 6-point.
  • Mercedes, Porsche, Volvo some Ford and Chrysler cars/trucks use 5-point fasteners of transmissions, air sensor or injector pumps.
  • 1/4-inch shank hex bits in sizes: TS10, TS15, TS20, TS25, TS27, TS30, TS40.
Check Stock

Select Increments 1976-1995 Compatible with Jeep CJ7 CJ8 YJ Wrangler Intra Pod Console with Kicker Sub Woofer 21576K

  • Select Increments 1976-1995 Compatible With Jeep CJ7 CJ8 YJ Wrangler will NOT FIT CJ5 Intra Pod With Kicker 21576K.
  • Features: Pre-cut housing that will accept most 8” subwoofers ,Heavy-duty metal mesh 8” speaker grille, compatible with most 8”subwoofers....
  • Two large, integrated cup holders ,Locking storage compartment with durable continuous hinge ,Tamper-resistant specialty fasteners and special drill....
  • Included: Intra-Pod and mounting hardware ,Kicker mono amplifier rated at 150 watts RMS @ 4 ohm ,8” metal-mesh sub cover.
  • Kicker 8” subwoofer (4ohm, single voice coil) ,Kicker remote bass level controller. ,8-gauge amplifier installation kit.
Check Stock

Tri-Groove Tamper Proof Security Nuts 316 Stainless Steel 1/2\-13 - Qty 1

  • These tri-groove Nuts are corrosion resistant 316 stainless steel, making the fasteners suitable for long term applications in harsh environments..
  • Common applications of 316 stainless steel fasteners include use on boats, docks, piers, and pools..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 5/8\-11 - QTY 25

  • These tri-groove Nuts are corrosion resistant 316 stainless steel, making the fasteners suitable for long term applications in harsh environments..
  • Common applications of 316 stainless steel fasteners include use on boats, docks, piers, and pools..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

License Plate Screws Anti Theft -Stainless Steel Tamper Resistant Locking Front or Rear License Plate Frames Bolts Set,1/4 Metric M6 Security Rust Proof Self-Tapping Screws,Fasteners Nut,Chrome Caps

  • ...ate frame will protect you from the trouble of license plate theft and rust and corrosion. Other popular metal screws will rust and damage your license plate holder and car body..
  • Secure Heavy-Duty Plate Accessories- The kit contains 58 pcs items, in addition to tamper-proof license plate screws, also includes screw fasteners: 8 nuts, anti-theft screwdriver, silver gasket,Chrome plastic screw cap covers, Foam license plate pads. High-gloss Chrome screw caps covers the screw head, which is not only beautiful but also anti-theft. License plate pad can play the role of license plate rattle proof, similar to the effect of silicone license plate frame.
  • Shopping Satisfaction- Our anti theft license plate screws are available with a 3-year manufacturer's warranty. If you are not satisfied with our products, or the screw size does not fit your car license plate, please feel free to contact us, we can provide you with a refund or send replacement screws for free. Please buy with confidence!.
Check Stock

Anti Theft License Plate Screws-Black Screws for Locking Car Tag, Frame and Cover, Mounting Hardware Kit for Front/Rear, M6 Stainless Steel Screws, Caps, Fasteners Nuts, Rattle Proof Pads (Silver)

  • ...cal bolts-made of high quality 304 stainless steel that will fit most motorcycles /Car /Truck license plate holes, suitable for the mounting of front bumper license plate or back trunk license plate frame.The metric M6 screws(1/4 inch) (6mm) are Universal Car Accessoriese application for compatibility.
  • LICENSE PLATE FASTENERS:4 solid Stunning Premium Smooth Caps Finish license plate screw caps are used to hide the screws,can better compatible with your license plate frame and license plate.License plate screws with caps cover the head of pan head screws very well,making your car,license plate,frame cool and tidy.The black rattle proof license plate pads Paste on the back of the license plate to reduce the vibration and noise of the metal license plate and avoid scratching the paint of the car.
  • SECURE HEAVY-DUTY PLATE ACCESSORIES- The kit contains 30 pcs items, A set of 4 tamper-proof license plate screws, also includes screw fasteners: 4 nuts, anti-theft screwdriver, gasket,Chrome plastic screw cap covers, Foam license plate pads. High-gloss Chrome screw caps covers the screw head, which is not only beautiful but also anti-theft..
  • SATISFACTION GUARANTEE- We provide many types of license plate screws:Please make the correct purchase choice according to t....
Check Stock