Reviews Tail Seal

Qiilu Auto Lens Repair Kit, 3 Pieces Car Lights Crack Repair Film Multi-Pack Headlight Taillight Repair Tools (Red, Amber, Clear)

  • [ Function ] --- This tail light repair tape is designed to repair tail lights, turn signals, and clear lenses crack easily without removing the housing.Simple repair process, just cut and paste. Size: 192 * 95mm..
  • [ Precise Design ] --- The repair panel designed with a pre-formed grid pattern, which matches your original lens closely..
  • [ 3 Colors Design ] --- Multi-pack repair kit comes with 3 colors, red, amber and clear..
  • [ Good Seal Performance ] --- Our tail light lenses tape adopt special adhension will form a weather proof seal, allows to paste on flat or curved surfaces..
  • [ Instructions ] --- ①Remove all crack and broken pieces around damaged area②Clean lens around area thoroughly with dry cloth③ Hold panel over damaged area to determine size of lens repair panel. Position the pane allowing 1/2 inch over lap on all sides of damage. if size selected needs to be smaller, trim along the inner grid lines④Peel backing from panel and center over area to be repaired. Press the panel to the lens and run your fingers around the edges to insure a good bond..
Check Stock

Partsam 12V LED Submersible Low Profile Rectangular Trailer Lights, Waterproof LED Combination Trailer Tail Light Kit Stop Brake License Plate Turn Running Lights Sealed for Boat Trailer Lights Truck

  • FUNCTIONS& LEDS: Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted: Stop, tail, turn, side marker, side reflex, rear clearance, rear reflex and Built-in license plate light on driver's-side light illuminates license plate.
  • Left light have 22 diodes which include 4 diodes for license plate light function,Right light have 18 diodes , applied for Trucks,trailers,tractors,Dump trailer,bus,Utility boat,RV,Camper cargo,etc.
  • FEATURE: Use the highest quality components for great conductivity and durability.Complies with DOT standards. Best quality GUARANTEED! Designed tough and ready to handle harsh weather and road vibratio.using welded together to ensure a permanent and water proof seal..
  • INSTALLATION: Each rectangular light size:8" Length* 3" width* 2-3/4" height,Stainless steel hardware for under and over 80" marine towing vechiles..
  • IP68 Waterproof and Submersible(We Upgraded it this Year): There is no screw on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. We have this tail light chipped in the center to prevent water to come in, thus, the water will flow into interlayer of the outer lens, but be prevented by the isolated ch....
Check Stock

Minimin Seal Pillow, Kawaii Chubby Blob Seal Plush Pillow Stuffed Cotton Plushies Animal Toy Cute Ocean Pillow (Small)

  • Our blob seal pillow is made using polyester polyurethane blend along with a 100% polyester cover that gives it the super stretchy, soft, and realistic seal look. The realistic seal pillow measures 11.8 inches long x 6.7 inches wide x 5.1 inches tall..
  • If you know someone who loves seal more than any other animal in this world, this is the perfect gift to get for him or her. It’s a seal pillow that is so round, so cute, so soft, and so squishy, he or she will never want any more gifts from you or anyone else..
  • HYPER REALISTIC - The seal pillow took all of the attributes of the seal and put every last detail into the pillow to make it look as realistic and as close as possible to a real life seal as they could. This includes details of the seal’s legs, body, tail, nose, eyes, whiskers, and even its spots..
  • SUPER SOFT - The seal pillow is super stretchy, soft, and has a cute seal look, huggable, and stretchable, safe and non-toxic.The cute seal pillow makes you comfortable on the sofa, watching TV or reading a book..
  • This Fluffy Plush Seal Pillow is no joke: it will judge you regardless of how many cuddle sessions it receives from you. It will make sure it claims it’s title as the most “Fluffy Seal“..
Check Stock

Carrep Submersible Square LED Trailer Lights Kit Waterproof 12V Utility Red LED Stop Turn Tail License Brake Running Light Lamp Under 80' Boat Trailer DOT Compliant

  • Widely Application + DOT Certification⭐ Designed for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc. The LED trailer tail Lights Serves 7 functions: Stop/Turn/Tail/Rear reflector/side reflector/side marker light/ license plate light..
  • All-in-one Kit⭐Trailer tail light kits has everything you need, with 1 Pairs trailer Lights + 2 gaskets + 2 amber clearance lights + one 22 feet and one 4 feet wiring harness + 1 license plate bracket + 4 reflective sticker + some screws..
  • Completely Sealed and Waterproof⭐ No screw on the lamp shade.Submersible Led Trailer Lights's lens and housing are completely welded together, The circuit board of tail light is seal..
  • High Visibility LED⭐ All diodes are LED, NOT Any incandescent bulbs! High Brightness LED Combination tail lights last more 30-40 times than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. It saves you time and money..
  • Installation Tips⭐Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Product Description or User manual. Gifts for dad men him..
Check Stock

Go, Flush, Wash and Dry

  • Internally mounted, high speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12 volt dc, permanent magnet motor with ball bearings and robust ceramic seal, discharges up to 5ft (1.5m) above the base of the toilet..
  • Raw Water Rinse pump inlet - ¾" (19mm) hose tails. Flush pump discharge - 1½" (38mm) hose tail..
  • Jabsco, self-priming rinse pump up to 3m (10ft), dry running, diaphragm water pump driven by 12 volt dc, permanent magnet, ball bearing motor..
  • One Touch 'Press and Release' switch pad mounted on wall with four flush and rinse finctions, sealed for life, with 10 -feet (3m) link cable, fitted quick connector, and heat shrink seal..
Check Stock

Partsam 2Pcs LED Triple Tail Lights 45 LEDs, Rectangle Vertical or Horizontal Mount LED Trailer Camper RV Tail Lights Stop Turn Tail Backup Reverse Lights Taillights w/ Black Base - Red/Clear Lens

  • Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black recessed base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light.
  • These Recessed Triple Vertical Taillights include 3 red lenses: 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White Leds(Built-in reflex reflector removes the need for a separate reflector).
  • This Led triple tail light assemblies can be mounted oriented horizontally or vertically, whatever suits your application.
  • This LED Triple Tail Light is hardwired with 8 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights.
  • NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal.
  • Overall dimensions: Overall length is 14.17 inches approx., and overall width is about 7 inches, and the tail light is about 0.87 inch thick, requiring 13.4 inches long x 6.3 inches hole to hole cutout for complete installation. Really a nice slim profile unit.
Check Stock

VLAND Led Tail Lights Compatible with Honda Accord 10th Gen 2018-2022 Rear Lamps w/Scanning Dynamic Animation Breathing DRL, w/Sequential, Smoked/Tinted, Pair 4Pcs

  • OEM Direct Fitment - Compatible for 2018 2019 2020 2021 2022 honda accord. Designed to be an exact replacement for your factory Tail lamps with no vehicle modifications required for getting the job done right..
  • LED Tail lights with Dynamic Animation - Scanning dynamic animation comes to life when you lock or unlock the vehicle. A breathing light and choreographed sequence of light in motion greets you upon your arrival or bids you farewell..
  • Turn Signal with Switchback - Full LED, NO bulbs needed. The lights have a row of amber LED which can set up to run as switchback signal. Led rear lamps with switchback is designed to fully upgrade your car. Ultra-modern fiber optic style to give a touch of high-end elegance to the appearance of your vehicle making it stand out from the rest..
  • NOTE- There is a waterproof pad on the back of tail lights, please seal the waterproof pad and make sure there is no gaps to prevent moisture when install the tail lights. When meet any issue of product, please message us and provide the product label, video& pictures proof, make sure the pictures& video clearly shows the defect..
Check Stock

Partsam 2x Double Led Trailer Tail Lights Horizontal Mount Dual Stop Turn Tail Backup Reverse Lights 33 LED Surface Mount RV Double Led Taillight RV Double Led Tail Lights 12V IP67 White Base w Gasket

  • Package Includes 2x led double horizontal mount taillights FULL LEDs featuring a white base with 6 screw holes for secure mounting, stainless steel screws are included. Also, mounting gaskets are included to create a tight seal and offer some cushion behind the actual light..
  • These Double Vertical Taillights include 2 red lenses: 1 replaceable red led stop, tail, and turn light, 1 clear backup light with a red reflex lens border, and White LEDs (a Built-in reflex reflector removes the need for a separate reflector).
  • This Led double tail light assemblies can be mounted oriented horizontally or vertically, whatever suits your application..
  • 5-Wire Connection: White is Ground (Negative), Blue is Backup/Reverse Light, Red is High Brightness for Stop or Turn Signals, and Black is Low Brightness for Tail or Running Lights.
  • NOTE: If upgrading from halogen bulbs to led, you may need resistors to splice in or you may have hyper flash on your turn signal..
  • Overall Dimensions: overall length is 9.5 inches approx., overall width is about 7 inches, and the tail light is about 0.87 inches thick, requiring 9 inches long x 6.3 inches hole-to-hole cutout for complete installation. Really a nice slim profile unit..
  • Warranty: We truly offer a 1-year warranty for these ....
Check Stock

Partsam 2x LED Triple Tail Lights 45 LEDs Rectangle Vertical Horizontal Mount LED Trailer Truck Camper RV Stop Turn Tail Lights Backup Reverse Taillights w Gasket Black Base Amber/Red/Clear Lens 12V

  • Package Includes 2x led triple horizontal mount taillights FULL LEDs featuring a black base with 8 screw holes for secure mounting, stainless steel screws are included. Also, mounting gaskets are included to create a tight seal and offer some cushion behind the actual light..
  • These Triple Vertical Taillights include 3 lenses: 2Pcs replaceable red led stop or tail lights, and 1 of them with 1Pc clear backup light with red reflex lens border and white LEDs (built-in reflex reflector removes the need for a separate reflector) in the center, 1Pc amber/yellow turn light.
  • This Led triple tail light assemblies can be mounted oriented horizontally, vertically, surface/flat-mount..
  • 8-Wire Connection: White Wire is Ground(Negative), Blue Wire is Backup/Reverse light, Red Wire is high brightness for Stop or Turn Signals, and Black Wire is low brightness for Tail or Running Lights. NOTE: If upgrading from halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal..
  • Overall dimensions: Overall length is 14.17 inches approx., and overall width is about 7 inches, and the tail light is about 0.87 inches thick, requiring 13.4 inches long x 6.3 inches hole-to-hole cutout for complete installation. WIRE LENGTH: 8.6inch, 2....
Check Stock

Jabsco Lite Flush Compact 12 Volt Marine Electric Toilet with Panel Control

  • Internally mounted, high speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12 volt dc, permanent magnet motor with ball bearings and robust ceramic seal, discharges up to 5ft (1.5m) above the base of the toilet..
  • Raw Water Rinse pump inlet - ¾" (19mm) hose tails. Flush pump discharge - 1½" (38mm) hose tail..
  • Jabsco, self-priming rinse pump up to 3m (10ft), dry running, diaphragm water pump driven by 12 volt dc, permanent magnet, ball bearing motor..
  • One Touch 'Press and Release' switch pad mounted on wall with four flush and rinse finctions, sealed for life, with 10 -feet (3m) link cable, fitted quick connector, and heat shrink seal..
Check Stock

Partsam 2Pcs 8.5' Oval Led Tail Lights 40LED Red for Trailer RV Motorhome Airstream Oval Led Stop Turn Tail Lights Surface Mount Taillights Replacement Lights IP68 Submersible w/Mounting Gaskets

  • Package includes 2 Pieces 8.5 Inch Oval Led trailer tail lights in Red Lens, 2pcs self tapping screws are included for complete mounting. It is a really nice Low profile trailer light for the back of your trailer, RV, Camper, Airstream or motor home. This led taillight is universal design 12V DC and is not vehicle specific. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on.
  • These oval led trailer RV stop turn tail lights need to be hooked up to a 12v dc power source and includes 40 LEDs each. LEDs are brighter and light faster, draw less current and generate less heat than incandescents and the built-in reflex lens provides increased light output for added safety. With a sonically sealed submersible IP68 waterproof rating, our rv led tail lights are better suited to deal with any different kinds of serious weather attack.
  • Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light.
  • They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the....
Check Stock

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • 4.56″ long x 3.78″ tall x 2.63″ deep.
  • trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
Check Stock

VLAND Led Tail lights Compatible with Base Sedan Lexus IS250 IS350 IS22d 2006-2012 ISF 4-Door 2008-2015(Not for IS250C Convertible 2-Door) Smoke/Tinted

  • OEM Direct Fitment - Compatible for 06-12 Lexus IS250 IS350 IS 220d, also fit 08-15 Lexus IS F Model, NOT fit a Convertible like IS250C. Designed to be an exact replacement for your factory Tail lamps with no vehicle modifications required for getting the job done right..
  • NOTE- There is a waterproof pad on the back of tail lights, please seal the waterproof pad and make sure there is no gaps to prevent moisture when install the tail lights. When meet any issue of product, please message us and provide the product label, video& pictures proof, make sure the pictures& video clearly shows the defect..
  • Custom Full LED display - No bulbs needed. Ultra-modern fiber optic style to give a touch of high-end elegance to the appearance of your vehicle making it stand out from the rest..
  • Interchange Part Info - OEM #: R: 8156353170.
  • R: 8158153061 (IS 250, IS 350, IS F 2006-2014).
Check Stock