Reviews Tail Plug

Nilight - TL-07 6 Inch Oval Red Led Trailer Tail Lights 4PCS 10 Led with Flush Mount Grommets Plugs IP67 Waterproof Stop Brake Turn Trailer Lights for RV Truck

  • Awesome Brightness: Each tail light has 10 PCS high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.
  • Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”".
  • Upgraded Unique Design: Nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wiresUpgraded Unique Design: Nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of the grommet, and a tighter attaching ability between the 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly to the light. Shake proof, there will be no worries....
Check Stock

Partsam Pair 4D Jee p LED Tail Lights Assembly DOT Approved, Compatible with Wrangler JK JKU 2007-2018, High Intensity Rear Tail lights w/Parking Light, Brake Turn Signal Reverse Light (Clear Lens)

  • Quality Construction: Manufactured to exacting specifications with the upgrade materials, 2 jk Jeep Wrangler LED Tail Lights feature rugged, black polycarbonate housing with 4D clear acrylic lens, more spot for safer vehicle, safer driving, durable to use. Super bright Brand LEDs have an 70000h average life span, well weather-sealed to prevent dirt and moisture harming the sound condition of the art electronics founded inside, perfectly suited for automotive vehicles..
  • Three Light Modes: Daytime Running Lights, Brake Turn Signal Lamp and Reverse Light Function. The LED taillights for JK improves Luminance to the Back of Your JK, build-in transducer prevent light flicking..
  • Easy installation to be a direct Plug and Play replacement for your JK's original factory tail lights. Built-in Resistor, No extra Load Resistors needed. Installation can be completed within 30 minutes with basic hand tools..
  • Apply to: This pair of LED Tail Lights specifically designed to used on 2007-2018 Jeep Wrangler JK models, including Rubicon and Unlimited. Driver side and passenger side both included. Note: The taillight has a female plug for U.S. models. (Please confirm a male or female plug your car requires).
  • Warranty: Package included: 1pcs Driver-Side Tail Light & 1pcs Pass....
Check Stock

Blaster-X Integrated LED Tail Light for 2014-2023 Honda Grom (Smoked Lens)

  • Complete Plug and Play Integrated LED tail light with high quality smoked lens - OEM fit. Features our Microprocessor based Blaster-X Technology with Brake Alert and Strobe Mode built in! New 2nd Generation Programming Interface allows users to easily customize features! New Sure-Blink Technology Plug and play connectivity with OEM connectors! ***REQUIRED ACCESSORY: ELFR-1_QD Flasher Relay***. Recommended Accessory: Blaster-X Control Switch. Made in the USA! 2-year Warranty & Satisfaction.
  • Brake Alert automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation..
  • Turn Alert is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast t....
Check Stock

LED Brake Tail Light for Harley Davidson [F1-Style Flashing Blinker] [Turn Signals] [Claw-Design] [DOT] [Plug-n-Play] License Running Tail Brake Light Compatible with Sportster Fatboy Softail Road

  • A NEW BREED  - Introducing the latest evolution of our classic claw design tail light. This new light features the same bold styling and blacked-out housing as the original but comes with a little extra power under the hood..
  • RESPECT THE ROAD - Low visibility and distracted drivers, the road is no place to let your guard down. Built with F1 style flashing blinker and turn signals function, these upgraded tail lights are the ideal safeguard for less than ideal situations..
  • PLUG-AND-PLAY - A motorcycle belongs on the road, not sitting in the garage. Our unique tail light wiring harness is designed to plug directly into your stock tail light circuit board without compromising any of your stock lighting..
  • STRONGER IS BETTER - Never let weak, broken lighting keep you off your bike. Armed with 23 high-output LEDs and an unstoppable IP67 waterproof rating, these Harley Davidson tail lights turn overengineering into an obsession..
  • DOT COMPLIANT - Unique, tough, and legal. Unlike other, cheaper tail lights, our lights are DOT compliant, come with an integrated license plate light, and are ready to rock right out of the box..
Check Stock

2014-2019 C7 Corvette Morimoto Aventador-Style LED Tail Lights

  • Awesome Brightness: Each tail light has 10 PCS high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night..
  • Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”.
  • Upgraded Unique Design: Niligh's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires.
  • Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.
  • Universal Application: Work on a 12 V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just m....
Check Stock

Partsam Red Cargo Carrier Hitch Rack Lights Kit, 2Pcs 6 Inch 10 LED Oval Waterproof Tail Lights with Rubber Grommets, 76\ Wiring Harness, Bike Rack Light

  • This listing features for 1 set of Railed Hitch Cargo Carrier led light kit, bike rack light kit. Package includes 2Pieces 6 Inch oval waterproof LED tail lights 10 LED Diodes, 2Pieces rubber grommets, (1) 76" Wiring harness, (9) cable ties (fasten the cable and lights). The wiring harness has a standard 4-way flat, trailer-end connector for easy setup, just plug into your vehicle's trailer connector for installation.
  • This Red Cargo Carrier LED light kit provides stop, turn and tail light functions for your hitch cargo carrier. It is designed for use with different kinds of the cargo carriers as well as the size and length fits, which is required if your cargo carrier blocks your vehicle's tail lights. This cargo carrier LED Light Kit is perfect for 63152,63153,63154,63155,59108,59109,59110,59502,59507,59550,38174 cargo carriers.
  • (2) 6 Inch Oval Waterproof, red LED lights: 7 1/4" x 3" x 1 1/8"(with rubber grommets), 6 3/8" x 2 3/16" x 7/8"(light only), drill hole size is about 6 9/16" x 2 7/16".
  • It is flush mount with grommet (included) and accepts standard 3-prong plug, really plug and play.
  • Install Tips: 1.Snap the rubber type grommet into the opening in the cargo carrier.
  • 2. fits tail lights into to grommet and with some pressure on the grommet pu....
Check Stock

NTHREEAUTO Smoked LED Rear Tail Light Motorcycle Taillights Brake Driving Compatible with Harley Dyna Road King Electra Glide Street Bob Touring

  • Plug N Play: MOVOTOR tail light with running/ brake/ integrated turn signal lights, brighter than stock tail light with smoked lens, upgrade the turn signal plug, directly plug and play, easy Install. Lay Down Style, which is angled to follow the curve of your rear fender for the streamline look..
  • Functions All in one: This movotor taillights can be used as running light, brake light, turn signal light(turn left/right). White Light used as license plate light.
  • The brake light and turn signals light built together. Providing good visibility, it makes your driving much safer..
  • Fitment: Fits for Harley Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, All 1991-2010 FLST Models (except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSE).
  • All 2002-2010 FXST Models (except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCW/C).
  • 1991-2010 Electra Glides (except 2005 FLHTCSE, 2009 FLHT Standard)..
  • High intensity led chips, Increased rear visibility, Easy to notice by others vehicles on road for safety driving. Lifespan: above 30000 hours.
  • Wire for functions: Running--White Wire, Brake--Red Wire and Turn Signal: Yellow wire-- right turning.
Check Stock

DTR2017 Smoked LED Tail Light, Integrated Motorcycle Rear Brake License Plate Lights for Harley Dyna, Road King, Street Glide, Sportster 1200, Softail and Touring

  • Package includes 2 Pieces UTV tail lights Replacement for Polaris Ranger 570 900 1000 / Brutus HD / General rear tail lights. This new Led tail light can directly replace your stock tail light and fit both your driver side and passenger side. Replacement for Part Number: 2412774.
  • Each UTV tail light has 14 piece high quality 3528 LED chips with more than 30K working hours, two step lighting and can work as both running light/tail light and brake stop light.
  • Compatibility of the Rear tail light: Compatible with Polaris Ranger 570 full size tail light/Ranger 900 tail light/Ranger 1000 tail light/Compatible with Ranger Brutus HD tail light/Compatible with Polaris Ranger XP 1000 tail light/Compatible with Polaris Ranger XP 900 tail light/Compatible with Polaris Ranger Crew XP 1000 tail light/Compatible with Polaris Ranger Crew XP 900 tail light/Compatible with Polaris Ranger Crew 570 tail light/Compatible with Polaris Ranger Diesel tail light etc..
  • This tail light has some difference form the stock tail light. It does not have the reflective sticker on the side that your stock tail lamp has. Of course you can use the 3-M reflector tape for it. Also this tail light assembly does have inserts for bolts. You will need to ch....
Check Stock

WildAuto 10Pcs 3 Prong Pigtail Wire Plug, Right Angle 3-Wire Trailer Light Plug, 3-Wire Pigtail for Truck Trailer Side Marker Clearance Lights, for Trailers Trucks Tail Lights

  • 【Package included】10Pcs Right Angle 3-Wire Trailer Light Plug.
  • 【Easy to install】White Wire: Ground (Negative). Red Wire + White Wire: High Brightness, worked as Stop/Turn/Brake Light. Black Wire + White Wire: Low Brightness, worked as Tail/Running Light. (White wire: ground)..
  • 【Universal plug】3 Prong Pigtail Wire Plug is suitable for Trailers Trucks Tail/Turn/Stop/Brake/Reverse/Parking Lights..
  • 【Applications Widely】3 Prong Pigtail Wire Plug is suitable for 12V vehicles, For use on Semi Trucks & Trailers, ATVs, UTVs, Campers, Tractors, Service Trucks, Buses, Service Vans, Utility Trucks, Parade Floats, Horse Trailers, Utility Trailers, Pick Up Trucks, and ect..
  • 【Note】The 3-wires may not follow the "universal" trailer light plug wiring diagram, please just switch the red and white wire for a try..
Check Stock

Nilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Tail Stop Amber Turn Signal License Plate Light on 12V RV Pickup Trucks Marine Boats Trailers, 2 Year Warranty (5 Wire System)

  • 5-wire tail light systems only: these light kits are suitable for vehicles with 5-wire tail light systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation..
  • Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights.
  • Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc..
  • Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility....
Check Stock

Partsam Continuous 3 Prong Right Angle Plug Wire Harness Roll Male Bullet Plugs for Side/Tail Clearance Marker Lights,100pcs Plugs, 3 Prong, 12" Lead Between Plugs

  • Continuous 3 prong right angle plug wire harness roll for side tail marker clearance lights.
  • Using on semi trucks,trailers, ATV, UTV, campers, tractors, service trucks, buses, service vans, utility trucks, parade floats, horse trailers, utility trailers, pick up trucks, etc.
  • For any tail or side marker Lights that require 3 prong male plug.
Check Stock

Partsam 6Pcs 5x3' Rectangle Stop/Turn/Tail & Backup/Reverse Truck Trailer Hitch Light 12 LED Grommet Hardwired Flush Mount (4xRed+2xWhite)

  • Package includes 6 Pieces 5x3 Rectangle Led Stop Turn Tail Lights and Backup Reverse Truck Trailer Hitch Lights(4 Pieces red lights and 2 Pieces white lights). Rate for 12V,test to 13.8V.
  • Each led tail light has 12 leds and provide super night vision and enhance visibility during night. Functions of 5x3 Rectangle led trailer lights: stop light, turn signal light, tail lights (Red 5x3 lights) and back-up lights or reverse lights(White 5x3 led lights). NOTE: People call it 3x5 rectangle led lights on Market, but the actual sizes are as following: 5.14" x 3.27" x 1.00" (light only), 6.25" x 4.26" x 1" (overall size), drill a hole about 5-5/8" to install it.
  • These taillights are HARDWIRED with 3 wires: White Wire is the Ground.
  • NOTE: These 3x5 lights are NOT "plug and play" lights. It does not have the standard 3 prong plug that these style trailer lights typically do, You need to hardwire them. It’s a very easy thing to do.
  • These led trailer tail lights are univeral for almost all vehicles, such as: Trucks, trailers, tractors, semi trailers, Dump Trucks, horse trailer, enclosed trailer, cargo trailer, golf cart, flatbed, UTV etc..
  • Warranty: We truly offer 1 year warranty for these recta....
Check Stock

Xprite LED Tail Lights with Novel C Shaped Design Smoke Lens Taillight with Running & Brake & Turn Signal & Reverse Light Compatible with Jeep Wrangler JK JKU 2007-2018 Built-in EMC DOT Approved

  • QUALITY CERTIFICATION - DOT safety certification. Xprite jk tail light uses a ABS shell and a high transmittance PMMA lens. OSRAM LED Chips, which....
  • FUNCTIONAL COMBINATION - Jeep wrangler taillights integrates 3 kinds of functional lights: driving lights (red), brake/turn lights (red), reversing....
  • RELIABLE SECURITY - Jeep tail lights are highly recognizable, allowing the rear to clearly see the movement of the car's light effects, waterproof,....
  • CONVENIENT INSTALLATION - Jeep wrangler tail lights adopts a plug-and-play design, it only takes ten minutes to install quickly. No need to replace....
  • COMPATIBLE RANGE - Compatible with 2007-2018 Jeep Wrangler JK 2 Door/ 4 Door . #NOTE: Taillight has a female plug for U.S. models. (International....
Check Stock