Reviews Tacklife Mitre Saws

Trend ANGLEFIX Miter Guide Red

  • IDEAL USE: Use for mitre cutting of frame, skirting (not tall skirting), architraves and beading as well as basic marking out.
  • ANGLE TYPE: Sets internal and external angles.
  • COMPATIBILITY: Can be used with hand mitre and snip-off saws.
  • HALVES THE MITER ANGLE: Eliminates the math needed to get the correct angle.
  • HIGH DURABILITY: Made from Glass-fibre reinforced nylon.
Check Stock

Fuller Tool 320-0755 Ogee Cut Crown Molding Cutting Guide moulding jig hanger installation corners tool trim curved 45 degree cuts for miter saws power radial table home carpentry renovation or repair

  • Simplifies the process of cutting curved crown mouldings into five easy steps.
  • Can be used with power mitre, radial and table saws.
  • Ideal for practically any home carpentry, renovation or repair projects.
  • Creates snug-fitting 45-degree cuts without having to tilt the saw blade.
  • Measures approximately: 12-1/2 in. x 4 in. x 3 in. (31 cm x 9.5 cm x 8 cm).
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ... miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen the knob to quickly adjust the angle. It is very suitable for cutting wood at a specific angle and can help you achieve a perfect cut..
  • ❤ [Perfect wood cutting project] Table saw miter gauge is widely used in woodworking DIY, very suitable for wood cutting projects: it can be used for table saws, band saws, planers, lockstitch machines, joints, miter fence systems are currently A must-have for every family. If there is a product quality problem or any problem, we can replace it at any time (please see the picture size) and its slideshow..
Check Stock

Iron Cutting Saw Blade,Saw Blade Metal Circular Iron Cutting High Speed Steel Hardware Tools 355x2.6x2.0x25.4x66T

  • Fast cutting with long durability, negative rake angle design is suitable for hard materials.
  • Possess high hardness large cutter head, fine grinding surface, stable body.
  • Saw blade have stable structure, excellent performance and long service life.
  • Good-quality high-speed steel material, possess good strength, toughness, and strong wear resistance.
  • This equipment is used for circular saws, mitre saws, table saws, radial arm saws, etc..
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ... miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen the knob to quickly adjust the angle. It is very suitable for cutting wood at a specific angle and can help you achieve a perfect cut..
  • ❤ [Perfect wood cutting project] Table saw miter gauge is widely used in woodworking DIY, very suitable for wood cutting projects: it can be used for table saws, band saws, planers, lockstitch machines, joints, miter fence systems are currently A must-have for every family. If there is a product quality problem or any problem, we can replace it at any time (please see the picture size) and its slideshow..
Check Stock

Freud D1084L 10\ Dia 84t TCG Saw Blade w/5/8\ Arbor

  • Special Tico Carbide formula offers a blend of carbide with low Cobalt content that produces a very "hard" carbide for long cutting life..
  • This blade features a thin kerf triple chip design that is specially designed to cut laminate flooring (Pergo, Armstrong, Swiftlock), double-sided laminates and melamine cleanly.
  • Features Freud's Perma-Shield coating, Anti-Vibration reeds, Heat Expansion slots, and Laser Cut technologies..
  • Thin kerf design to increase machine performance. Ideal for sliding mitre saws and underpowered table saws..
Check Stock

STANLEY Hand Saw with Mitre Box, 12-Inch (19-800)

  • Storage system of the hand saw holds all 12 x 14 inch STANLEY back saws.
  • Finger button allows easy release of the handsaw from storage cavity.
  • 90 degree, 45 degree, and 22-1/2 degree mitre slots.
  • Holes in base for fastening to a workbench.
  • Open interior allows cuttings to fall through.
  • Can be used with either back or panel saws.
  • An ideal storage case that includes a sharp and durable Stanley 12-inch backsaw.
  • 90-degree and 45-degree miter slots as well as 22-1/2-degree slots for octagon shapes.
  • One-finger access button allows for the easy release of saw from storage cavity.
  • Holes in base for fastening to a work bench.
Check Stock

Freud LU77M012 12' Thin Kerf Non-Ferrous Metal Blade, Multi, One Size

  • Special Tico Carbide formula offers a blend of carbide with low Cobalt content that produces a very "hard" carbide for long cutting life..
  • This blade features a thin kerf triple chip design that is specially designed to cut laminate flooring (Pergo, Armstrong, Swiftlock), double-sided laminates and melamine cleanly.
  • Features Freud's Perma-Shield coating, Anti-Vibration reeds, Heat Expansion slots, and Laser Cut technologies..
  • Thin kerf design to increase machine performance. Ideal for sliding mitre saws and underpowered table saws..
Check Stock

Grinder Wrench Adjustable Pin Spanner Wrench Angle Grinder Lock-Nut Wrench For Grinders

  • ★Pin Spanner Wrench Main Using:The adjustable pin wrench is for use with locknuts on angle grinders when fitting or removing abrasive discs.
  • ★Pin Wrench Fit Modle:Suits most grinders and Lock nuts. Ideal Replacement Pin Wrench For All Angle Grinders, Bench Grinders, Circular Saws, and Mitre Saws etc.
  • ★Pin Spanner Wrench Design: Pin Wrench Easy twist knob adjustment,Adjustable Extent:10-30mm.Heat treated pins for long lasting and strong grip and rubber dipped handle grip for comfort.
  • ★Note:Please allow 1-3 cm difference due to manual measurement.
Check Stock

Freud D1080N Diablo 10-Inch 80 Tooth TCG Non-Ferrous Metal & Plastic Cutting Saw Blade 5/8-Inch Arbor (4 Pack)

  • Special Tico Carbide formula offers a blend of carbide with low Cobalt content that produces a very "hard" carbide for long cutting life..
  • This blade features a thin kerf triple chip design that is specially designed to cut laminate flooring (Pergo, Armstrong, Swiftlock), double-sided laminates and melamine cleanly.
  • Features Freud's Perma-Shield coating, Anti-Vibration reeds, Heat Expansion slots, and Laser Cut technologies..
  • Thin kerf design to increase machine performance. Ideal for sliding mitre saws and underpowered table saws..
Check Stock

Aluminum Box Joint Jig, Router Table Saw DIY Tools Wood Jig Size Approx 450x60x30mm for Miter Gauge Woodworking Table Saw Tools

  • 【Excellent Workmanship】The product has high precision and excellent workmanship, and can be used for most table saws with standard slots..
  • 【Premium Material】The product is made of high-quality aluminum alloy material, wear-resistant and anti-rust, excellent performance and long service life..
  • 【Scope of Application】The aluminum box joint fixture is suitable for mitre gauge woodworking tools, and it is suitable for the box-type joint clamp of mitre gauge..
  • 【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
  • 【Quality Service】We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

JCB - Miter Saw Stand, Extendable Beam Extension Arms for Extra Support, 3'- 5' Extension, Durable Item Compatible With Other Brands, JCB Tools

  • ...r saw stand with its adjustable legs and height provides an ergonomic work environment for anyone, no matter your height. This is a great tool stand to place work tools on..
  • OPTIMAL LOADING AND EXTENSION STAND: Height extendable workpiece supports from 32 - 36", width extendable workpiece supports from 40 - 65". JCB Mitre saw stand has a strong loading capacity and can withstand any compound saw - capacity with it's 440lb load capability. The quick release and attach system helps miter machine mounting and removal both quick and easy..
  • COMPATIBLE WITH OTHER MITER SAWS: This miter saw stand is compatible with almost all types of miter saws on the market. The foldable, yet sturdy design of this miter saw stand is perfect when space is at a premium, fold away for easy, space saving storage, as well as being easier to transport to other locations for professional use or around the house and yard..
  • PRODUCT SPECIFICATIONS: Weight: 29.3 pounds, Item model number: JCB-MS-ST-NA, Max. Holding Length: 200KG (440lb)"" with ""Maximum Working Load: 440lbs.
Check Stock

FS Tool LM6300 Miter Joint Saw Blade 12 Inch X 100T 1″ Bore

  • For miter joint cuts in soft and hardwoods, painted mouldings, gesso and other high-gloss and pre-finished picture frames and furniture mouldings as....
  • On single or double cut-off mitre machines and radial arm saws.
  • Copper plugs reduce vibration and noise while cutting.
  • Polished plate resists resin build-up (no coating needed).
  • Tooth Configuration: 4 ATB & 1 Raker ensures perfect cut quality with no tear out on bottom side of the cut.
Check Stock