Reviews Table Saw Track Miter

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Rockler 36'' Miter Track - Miter Slot Fits 1' x 1/2' Deep Dado & Accepts a Standard 3/4' x 3/8' Miter Bar – Premium Grade Anodized Aluminum Miter Track Slot – Comes Pre-Drilled, Countersunk w/ Four Holes

  • Rockler 36'' Miter Track Bar: Our 36” inch miter slot track expands the use of the router table by providing the use of many sleds, clamps, jigs, and other woodworking devices..
  • Perfect Application: Set up your jigs, fixtures, and shop-made router tables for a perfect smooth-sliding miter gauge. This is the ultimate table saw miter track to build your own custom table saw or router table..
  • Perfect Size: The track fits into a 1" x 1/2" deep dado and accepts a standard 3/4" x 3/8" miter bar. Adjusts for perfect sliding action in any standard miter gauge track with just a twist of the wrist..
  • Durable Material: Our woodworking jig miter slider is constructed of 100% aluminum for excellent durability without the weight..
  • Easy Install: For fast, trouble-free installation, the miter slot gauge comes pre-drilled and countersunk with four holes for #6 mounting screws (not included)..
Check Stock

Rockler Table Saw Small Parts Sled

  • Sled base and fence provide zero-clearance support—just run it through your saw to locate the kerf.
  • Sled rides in miter track of your table saw—included miter slot stop limits forward travel of sled.
  • Rear-mounted blade guard is adjustable to fit most table saws.
  • Aluminum T-track on top edge of fence lets you add a flip stop (not included) for repeatable cuts.
  • Short T-track parallel to blade accepts an optional T-track hold-down clamp (sold separately).
Check Stock

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

Generic 2x Self Adhesive Steel Measuring Tape -metric 1M-0-1M - Middle to Both Sides

  • Brand new, the ruler is made of steel, with good hardness and durable use..
  • Used for workbenches, saw tables, machinery, desks, countertops, poles, walls, columns, Miter Saw,T-track,Miter Track Stop,Table Saw,Router Table,Band Saw,Woodworking Tools,etc..
  • Easy to use, Can be cut into different lengths according to their own needs, with self-adhesive..
  • Corrosion resistant design, double baking with good paint, scale is clear and wear resistant..
Check Stock

POWERTEC 71167 Aluminum Miter T-Track, 48-Inch, Aluminum Grey

  • FUNCTION: Ideal for creating customized sleds, stop blocks, feather boards, hold downs, sliding jigs and fixtures, while featuring a high-utility design that prevents slop in your miter gauge bar, enhancing bench-top tool precision.
  • BUILD: This aluminum t-track extrusion possesses a thick, heavy duty exterior that won’t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability.
  • VERSATILE: This miter track is an essential tool to your workshop made tables (can be used with your 3/4” x 3/8” bar), making it perfect for table saw extensions, router table, band saw, and all-purpose workbench applications.
  • CUSTOMIZABLE: 48 inch profile can be custom cut to suit your individual project needs and specifications.
Check Stock

Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws

  • What is a featherboard you might ask? Is it something I need for my workshop? Well the short answer is yes. Anyone who has a table saw or router table should seriously consider having at least one. Most work shops have more than one handy at any given time. Featherboards are simple devices that help keep your stock up against the fence your running your stock on. They generally act like a third hand by helping you control your stock while you push your stock through..
  • The Fulton Dual Deluxe Stacked Featherboard can be used as one unit or can be separated and used for vertical and horizontal applications. When the featherboards are stacked with the included 2” tall spacers, you’ll have a full 3-7/8” worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence..
  • Many featherboards come with a miter bar locking system that typically do not fit very well. We identified this issue and have redesigned the miter bar making it far more secure and easier to lock into your miter track. The aluminum bar is longer than older designs and is a bit more narrow in....
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

for Woodworking T Tracks 36” with Screws: 4 PCS Predrilled Universal Aluminum T Track for Cross Cut Sled, Router Fence Sled – Woodwork Accessories for Light-duty Woodworking Workshop Jigs DIY

  • ZOKMOK PROFESSIONAL T TRACK: Simple, Multipurpose, 100% Customer Satisfaction Support..
  • 36″ Length x 3/8″ Depth x 3/4″ Width.
  • High-quality #6063 Aluminum Alloy, Fine Sandblast Blue Anodized, Sturdy and Durable..
  • Can be Widely used in Table Saw, Miter Saw Station, Drill Press Table, Router Table, Assembly Table, CNC Table, CNC Router Waste Board, Worktable, Wood Bench but also in Kayak System, Adjustable Shelf, Bike Track, etc..
  • Make your own t track intersection kit with a miter saw, and stick t tracks with glue to get get a better experience..
Check Stock

POWERTEC 71146 Aluminum Miter T-Bar, 48-Inch, aluminum grey

  • FUNCTION: Ideal for creating customized high-utility sliding jigs, sleds and fixtures, while featuring a functional design that prevents play (lifting) for safer, high precision accuracy.
  • BUILD: This aluminum t-bar extrusion possesses a thick, heavy duty exterior that won’t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability.
  • VERSATILE: A perfect fit for all 3/4" x 3/8" t-slotted -miter slots (and standard table saws with t- slotted  miter tracks), making this miter bar ideal for benchtop table-saw extensions, drill press, router table, and band-saw table applications.  Also works with for Powertec 71167, Miter T-Track, for creating extension, jigs and other woodworking requirements..
  • CUSTOMIZABLE: 48 inch profile can be custom cut to suit your individual project needs and specifications.
Check Stock

Anodized Aluminum Combination Miter T Track/Mini T Track Rail for Jigs Fixtures Sleds Router Table and General Woodworking Applications 32 Inch MADE IN THE USA

  • ...r hold-downs. The miter track side also accepts ¾” x 3/8” UHMW slick bars, which are ideal for mobile sleds..
  • The mini t track side accepts ¼” x 20tpi hex head bolts. Typically you will find this style of bolt on many aftermarket featherboards and shop made work stops. This makes the track perfect for router tables, table saw extensions, band saw table extensions, drill press tables and more. The combination track measures 17/32” in overall height and is 1-3/4” in width which makes it a standard depth and width size for embedding into table tops..
  • Our thick walled, heavy duty tracks are designed for the everyday rigors of workshop use. The tracks are made from anodized aluminum and provide you with a smooth run each time you use it. Each track is made from a single piece of extruded aluminum giving it added strength. The track has extruded lines on the top and bottom of the track for easy alignment and hole drilling purposes. Each track comes with detailed mounting instructions..
  • When we decided to start manufacturing aluminum tracks many years ago (well over 20 years), we thought that it was very important to do our best to keep the manufacturing process here in the United States. We are proud to say that even after 20 years, we manufacture....
Check Stock

Anodized Aluminum Combination Miter T Track/Mini T Track Rail for Jigs Fixtures Sleds Router Table and General Woodworking Applications 48 Inch MADE IN THE USA

  • ...r hold-downs. The miter track side also accepts ¾” x 3/8” UHMW slick bars, which are ideal for mobile sleds..
  • The mini t track side accepts ¼” x 20tpi hex head bolts. Typically you will find this style of bolt on many aftermarket featherboards and shop made work stops. This makes the track perfect for router tables, table saw extensions, band saw table extensions, drill press tables and more. The combination track measures 17/32” in overall height and is 1-3/4” in width which makes it a standard depth and width size for embedding into table tops..
  • Our thick walled, heavy duty tracks are designed for the everyday rigors of workshop use. The tracks are made from anodized aluminum and provide you with a smooth run each time you use it. Each track is made from a single piece of extruded aluminum giving it added strength. The track has extruded lines on the top and bottom of the track for easy alignment and hole drilling purposes. Each track comes with detailed mounting instructions..
  • When we decided to start manufacturing aluminum tracks many years ago (well over 20 years), we thought that it was very important to do our best to keep the manufacturing process here in the United States. We are proud to say that even after 20 years, we manufacture....
Check Stock

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a met....
Check Stock