Reviews T8 Bracket Electrical

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • WARNING: All electrical wiring and installation of this product should be performed by a qualified electrician to NEC standards. Although these lights may be used with your existing shunted or non-shunted tombstones, we highly recommend replacing aging tombstones with new ones to avoid potential arcing and overheating..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-ho....
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • ...be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product ....
Check Stock

(Pack of 25) CNSUNWAY 4FT LED Light Bulbs, 22W 2400LM 6000K Super Bright White, Type-B Remove Ballast, Double-Ended Power, Frosted Cover, T8 T10 T12 Flourescent Light Bulbs Replacement

  • ✔EASY REMOVE BALLAST INSTALLATION – CNSUNWAY T8 4 foot led bulbs are easily fitted to replace traditional T8 T10 T12 fluorescent bulbs. Please must remove the starter and ballast before installation.Failure to do so will cause irreparable damage to the led tube! Product must be installed by licensed electrician or technician with electrical safety knowledge..
  • ✔ENERGY SAVING – CNSUNWAY 4ft led light tube has 2400+ lumens high output with only 22 watts power consumption.Comapared with fluorescent tube,it could save up to 65% on your electricity Bill!.
  • ✔FLUORESCENT LIGHT BULB REPLACEMENT – CNSUNWAY T8 4ft LED light tube is ideal replacement for T8 T10 T12 led fluorescent light bulb. It’s compatible with existing T8, T10, and T12 fluorescent fixture, making LED conversion easier than ever..
  • ✔HIGH QUALITY LIGHT TUBE- CNSUNWAY shatterproof 4ft T8 LED tube adopts high quality LED chips, offers sustained high brightness with a long lifespan, no flicker, no noise, non-polluting..
  • ✔HASSLE FREE WARRANTY – CNSUNWAY LIGHTING offers 24/7 after sale service and 2-year unlimited warranty! If you have any question, pls feel free to contact with us for a quick solution..
Check Stock

Fulham Lighting Fulham Workhorse Adaptable Ballast, WH6-120-L

  • COMPATIBILITY: Approved for lamp combinations of 140 max watts of CFS/4P, CFT/4P, CFQ/4P, CFM/4P, circline,linear T5, T5HO, T8, T8HO, T10 and T12 lamps.
  • INSTALLATION: Follow instructions while installing this product into your light fixture and use proper equipment.
  • Install in accordance with The National Electrical Code.
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL - 5000K

  • ...ypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable.UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warran....
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, UL - 4000K

  • ...ypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warra....
Check Stock

CNSUNWAY LIGHTING 8FT LED Bulbs, 45W 5400LM Super Bright, 5000K Daylight Glow, Frosted Cover, Ballast Bypass, High Output, T8 T10 T12 Single Pin LED Fluorescent Replacement Bulb(4 Pack)

  • 【Connectable】-8FT LED shop lamps can be connected with seamless connectors or T8 connector wires. (Please do not exceed 4 in series at a time) Replace the 150W fluorescent lamp..
  • 【EASY INSTALLATION】 - Easy to replace the traditional fluorescent tube lamp fixture, hard-wired, plug in with T8 power cord. Package comes with T8 metal clips brackets, screws, small connector, a on/off switch power cord and pigtail power cable. You can install these led tube lights on the wall or ceiling..
  • 【EYE PROTECTIVE】 T8 LED Tube Lights with bracket(Integrated) - Daylight white glow 5000 Kevin with clear cover and provide high output. These 8FT lights can be used Indoor shop, grocery, flea market, garage, warehouse, workbench, basement, laundry room, photo studio, gymnasium, practice room...
  • 【HIGH OUTPUT】 - This LED light fixture has 384 LED chips, high output and it will emit up to 9360 lumens bright lighting..
  • 【QUALITY ASSURANCE】 - This 8FT LED Tube Light Single Fixture have 3 years warranty, easy and fast replacement is offered if any quality issue..
Check Stock

GE Lighting 78619 GE332MAX-H/ULTRA 120/277-Volt UltraMax Electronic Fluorescent T8 Multi-Volt Instant Start Ballast 3 or 2 F32T8 Lamps

  • Multi-volt Instant Start T8 Ballast will accept up to 3 or 2 F32T8 lamps.
  • Accommodates multi-voltages from 120 to 277-volts, extra versatile for your unique projects.
  • Cool operation casing is rated UL55C at 131-Degree Fahrenheit, suitable for high temperature applications.
  • UL Type CC Rating provides protection against arcing in electrical components.
  • Mounting dimensions: 9-Inch L x 0.9-Inch W, Mounting slot set 0.3-Inch apart.
Check Stock

Electric Scooter Adult, 5 Inch 24V 180W Motor, Brushless Motor, Low Noise, with Hall Sensor, Electric Scooter Motor Replacement Parts

  • 1. HIGH SPEED MOTOR: Powerful Brushless DC Motor Kits 2500W 60V, Rated Speed No-load 4400rpm, Max can be 5800rpm, Motor Rated current 45A..
  • 2. DIY KITS, Electric Go kart Motor, small size, high speed, BLDC mid-drive motor with T8F sprocket, scooter motor with mounting bracket is easier to install and carry, with air cooling holes..
  • 3. DC motor kit reverse design, BLDC kart motor can run clockwise or counterclockwise through motor reverse line or handlebar reverse switch, and has a 3-speed function, low speed 50%, medium speed 70-80%, The high-speed speed is 100% efficient, but do not let the motor run in reverse for a long time, which is not safe for the motor life..
  • 4. 24 Mosfet 45A brushless motor controller. This speed controller uses high-quality materials. This controller has Hall, 3-speed, reverse, throttle, charging, electronic brake, power lock, light functions, etc..
  • 5. List and application of electric scooter motor kits, BLDC motor, speed controller, handlebar throttle, pedal throttle, power lock key, T8F tooth plate ring, T8F chain, 3-speed switch. Suitable for electric scooters, electric bicycles, mini motorcycles, off-road vehicles, electric karts, bicycles, four-wheel drive vehicles, other DIY projects, etc..
Check Stock

Electric Motor 1600W 48V go kart Electric Motor kit With throttle 33A Speed Controller BLDC ATV Kits Scooter Motorcycle Engine Ebike Conversion Kit Chain T8F

  • ... Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions etc..
  • 【SMALL BODY WITH HIGH EFFICIENCY】- Small Size, With high Torque High speed, BLDC Mid Drive Motor with T8F 9/11Teeth Sprocket, and the Scooter Motor with Mounting Bracket is more easy to Install and Enough Carry, with wind cold hole, Motor Wiring length about 150cm(59inch)，Motor Weight about 4.25kg (9.37lb)..
  • 【E-scooter Motor Kit List and Useful】- 1600W BLDC Motor, Speed Controller, Handlebar Twist Grip Throttle, Foot Throttle, Power lock key, T8F Tooth Plate Ring, T8F Chain, 3 speed Switch, is Good for Electric Scooter, E-bike, Mini Motorcycle,Dirt bike, Electric Go karts, Bicycle, Quad car，Other DIY project and more..
Check Stock

Mophorn 1800W Electric Brushless DC Motor 4500RPM Brushless Motor 48V Electric DC Motor for Go Karts E-Bike Electric Throttle Motorcycle Scooter and More (1800W 48V)

  • The dc electric motor's rated speed is 4500 RPM and the max apped is 5200 RPM.
  • Chain drive: (11 teeth sprocket) T8F chain.
  • The new 1800W 48V DC Electric Motor is MY1020 type brushless motor comes with the mounting bracket and an 11 Tooth T8F sprocket.
  • The 1800W 48V DC motor can be used for mini bike quad and Go-Kart. It may also work for bicycle.
Check Stock

150 W 24 V 12 V DC Electric Motor zy6812 f Scooter Bike go-Kart or minibike New

  • ...Make More Power efficient, High Quality Aluminum Shell to be Sturdy and Reliable, Easy to Install for Go karts E-bike Scooter mini Motorcycle Quad atv and more..
  • 【SMALL BODY WITH HIGH EFFICIENCY】- Small Size, With high Torque High speed, BLDC Mid Drive Motor with T8F Sprocket, and the Scooter Motor with Mounting Bracket is more easy to Install and Enough Carry, with wind cold hole, Motor Wiring length about 150cm(59inch)，Motor Weight about 3.3kg (7.3lb)..
  • 【DC MOTOR KITS POSITIVE & NEGATIVE ROTATION】- BLDC Go kart Motor Can Through the Motor Reversing Wire or Handlebar reverse Switch To Let The Motor Go Clockwise or Counterclockwise, And with 3 Speed Function, Low speed 50%, Mid speed 70-80%,High Speed 100% Efficiency, But Don’t let the Motor Run Reverse Long Time, is Not safe for Motor Life..
  • 【12Mosfet 30A Brushless Motor Controller】- The Motor Kit include 12MOS 30A Speed Controller, BLDC Motor Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions etc..
  • 【E-scooter Motor Kit List and Useful】- 1000W BLDC Motor, Speed Controller, Handlebar Twist Grip Throttle, Foot Throttle, Power lock key, T8F Tooth Plate Ring, T8F Chain, 3 speed Switch, is Good f....
Check Stock

Fulham Workhorse Electronic Ballast, Instant, 277V, -20deg.F

  • Price For: Each Wiring Type: Parallel Power Factor: Greater Than 0.9 Total Harmonic Distortion: Less Than 33.% Min. Starting Temp.: -20 Degrees F Light Output: Normal Ballast Type: Electronic Special Features: Versatile, High Power Factor, Lightweight, Small Case Size Ballast Factor: 1.18 Start Type: Instant Ballast Family: WorkHorse Item: Electronic Ballast.
  • Lamp Type: CFT, CFTR, CFQ, 2D, CR, T5, T5HO, T8, T12 Lamps Number of F32T8(30W) Lamps: 1 Number of F17T8 Lamps: 1 Length: 3-5/16" Number of F32T8(28W) Lamps: 1 Number of F32T8 Lamps: 1 Height: 1" Number of F32T8(26W) Lamps: 1 Number of F25T8 Lamps: 1 Amps AC: 0.15 Number of F28T8 Lamps: 1 Number of F14T5 Lamps: 1 or 2 Number of F20T12 Lamps: 1 Number of F28T5 Lamps: 1.
  • Number of F32T8U Lamps: 1 Number of F21T5 Lamps: 1 or 2 Number of F24T5 Lamps: 1 Voltage: 277 Number of F18/19T8 Lamps: 1 Number of F30T8 Lamps: 1 Input Watts: 5 to 35 Number of F15T8 Lamps: 1 Width: 2-5/16" Number of F13T8 Lamps: 1 Number of Lamps: 1 or 2 Country of Origin (subject to change): China.
Check Stock