Reviews T slot Milling Operation

JAINGU T Slot Milling Cutter 8 10 12 14 18 20mm HSS End Mill for Metal Milling Straight Shank CNC Router Bit12x2x8x65L

  • 1. ​Usually for milling T-slots in the tables and beds of machine tools and similar applications..
  • 2. dear buyer，Only one T Slot Milling Cutter is included with each option, please purchase according to your size needs..
  • 3. A rugged design with free cutting features ,with alternate side cutting teeth for maximum chip clearance..
  • 4. High speed steel material, provide rapid chip removal. Used for milling low-carbon steel, aluminum, copper, iron and non ferrous materials, works well on aluminum..
Check Stock

Half Round Keyway Milling Cutter, Hss Straight Shank T Slot Milling Cutter, 3 x 16 x 10mm Milling Cutter Milling Tool Milling Cutter

  • APPLICABLE MATERIALS: Widely used for milling steel, aluminum, copper and iron materials..
  • HIGH-SPEED STEEL MATERIAL: The high-speed steel material is used, and the metric system has a straight handle, which is easy to use and very practical..
  • HIGH WORK EFFICIENCY: Woodruff key-seat milling cutter, convenient for CNC machining, improve work efficiency..
  • T-SLOT MILLING CUTTER: T-slot milling cutter, stable structure, excellent performance and long service life..
  • SIZE: Woodruff key position cutter blade width is 3mm / 0.1in, outer diameter is about 16mm / 0.6in, and the handle diameter is 10 mm/0.4 inches..
Check Stock

S erounder Hold Down Clamp, Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track Woodworking Tool(T Screw and Plastic Knob Nut Just)

  • ✔Scope of Applications：The T-slot clamp is ideal for fixing, positioning and fixing workpieces in many woodworking or metalworking applications, including planers, drilling machines, CNC, table saws, fixtures, panels, vertical milling machines, etc.
  • ✔Easy to Install：The hold-down clamp is easy to install, and the flush pressure is applied to any position along the flush-mounted t-slot t-shaped track. Slide into the t-shaped track and fasten it by turning the knob nut.
  • ✔Multifunctional Usage：This is a set of compression fixtures for t-slot rails. These t-track hold-down clamps can be used in many woodworking and metalworking applications for workpiece fixation, positioning and fixing.
  • ✔Premium Materials：Our t-track hold-down clamp is made of high-quality metal materials, sturdy and durable, and has a long service life. Exquisite craftsmanship and exquisite operation ensure its super durability.
  • ✔What You Get：You will receive 1 x whole clamps set (threaded rod, t screw, knob nut, slide block, washer, clamp board) or 1 x t screw and plastic knob nut just.For a better customer experience, we will optimize the product from time to time.
Check Stock

MKFAHIF Zhouqigege T-Slot Milling Cutter Alloy Shank End Mill 8-10mm Shank for Metal Keyway Tool Tungsten Carbide Router Bit (Cutting Edge Length : 12x4Hx8Dx70L)

  • Package Including: 1pc T-Slot Milling Cutters.
Check Stock

DINGGUANGHE-CUP T-Slot Milling Cutter Alloy Shank End Mill 8-10mm Shank for Metal Keyway Tool Tungsten Carbide Router Bit Steel (Cutting Edge Length : 25x10Hx12Dx90L)

  • Package Including: 1pc T-Slot Milling Cutters.
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

xiji T-Slot Milling Cutters, 16mm Cutting Dia 8 Flutes HSS T Slot End Mill High Speed Steel Keyway Knife HSSAL Straight Shank T Slot End Mill Keyway Cutter Woodruff Keyseat Set, 1pcs

  • PREMIUM MATERIAL: This T Slot Cutter End Mill is made of high quality high speed steel (HSSAL) material, wear resistant and not easy to stick cutter. Woodruff key seat cutter can facilitate CNC processing and improve work efficiency..
  • FEATURES: It Is A Special Tool For Processing T-Slots. The End Edge Of The Milling Cutter Has A Suitable Cutting Angle. The Cutter Teeth Are Designed According To Helical And Staggered Teeth, And The Cutting Is Stable And The Cutting Force Is Small..
  • ADVANTAGE: The cutting edge is sharp and wear-resistant, it is not easy to break the edge, the surface is clean and free of burrs, and the finished workpiece has high smoothness. After The Straight Slot Is Milled, The T-Slot With The Required Precision Can Be Milled At One Time..
  • DURABLE: The high-frequency welding process is adopted at the connection between the cutter head and the cutter body, which is durable and not easy to break the knife, which greatly improves the practical life of the cutter. T‑slot cutter has stable structure, excellent performance and long service life..
  • WIDE APPLICATION: Used To Process T-Shaped Grooves On Various Mechanical Tables Or Other Structures. Suitable for milling steel, aluminum, copper, iron and non ferrous materials. It Has Sufficient H....
Check Stock

Carbide Dovetail Cutter 60 Degree 6 Flutes Slotting Milling Cutter Cutting Tool Metalworking End Mill Straight Shank Diameter 20mm/ 0.8in

  • SPECIFICATIONS: Dovetail slot milling cutter, 60 degree angle and 6 flute design, the blade diameter is 20mm, with standard size and accurate cutting..
  • HIGH EFFICIENCY: With fine grinding grooves, efficient and flexible operation, smooth direct chip evacuation, fast drilling speed and labor saving operation..
  • CEMENTED CARBIDE: The dovetail slot mill is made of carbide material, which has high hardness, wear and corrosion resistance, has long service life..
  • EASY TO INSTALL: The dovetail cutter has glossy surface without burrs, high grinding accuracy and stable size, with universal straight shank for easy installation..
  • APPLICABLE MATERIAL: Suitable for processing stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metals and other materials..
Check Stock

MultifunctionWorktable Milling Working Cross Table Milling Machine Compound Drilling Slide Table For Bench Drill Adjustme X-Y（6330 SIZE）

  • Premium Quality Structure: Built by heavy-duty cast iron material, which is anti-corrosion and rust resistance, angle milling table can withstand the tough environment and designed for long service time..
  • Highly Polishing & Stiffness: The compound slide table, with great hardness and stiffness, is high ground and not easy deformation. Three precise T-slots can meet different force requirements..
  • 2 Axis 4 Ways Move: Handles with trapezoidal thread spindles is easy to adjust the directions. X-axis travel: 210 mm, Y-axis travel: 110 mm. With a precise scale on it, you can adjust the optimal working position as you need..
  • Tightness Adjustment: Equipped with several quality bolts and nuts, you can easily adjust the tightness of this cross slide table. Convenient for your use..
  • Wide Application Area: This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines..
Check Stock

TE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock