HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'
- 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
- Hardened and ground For Bridgeport type milling machines.
- Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
- 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
- For double and single end mills (single end mils only for sizes over 5/8").
Check StockHHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)
- Diameter for Bore in Shell End Mill 1/2".
- Diameter range of standard end mills is 1-1/4 to 1-1/2"..
Check StockLittleMachineShop.com 4 Flute Ball End Mill Set, High Speed Steel, 6 Piece (2903)
Check StockOSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box
- APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
- Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
- Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
- Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
- These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check StockLittleMachineShop.com #3 Morse Taper End Mill Holder Set, 5 Piece (1636)
- Set of five 3 Morse taper end mill holders.
- Compatible with Mills with 3 Morse Taper Spindle.
Check StockLittleMachineShop.com R8 End Mill Holder Set, 5 Piece (1258)
- Set of five R8 end mill holders from 3/16" to 3/4".
Check StockKodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8\ to 1/2\ (Pack of 6)
- Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
- 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
- Stub length end mills for extra rigidity.
- Fitted wood block stand included and each size comes in a marked plastic tube.
- Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.
Check StockSpeTool 5Pcs 1/8 inch Aluminum End Mills 2 Flutes CNC Spiral Router Bits Non-Ferrous Metal Upcut 1-1/2 inches Long for Woodworking Cutting
- 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 2 flutes with flat top, 5 pieces included in the package..
- 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
- 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
- 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
- 【WIDELY USED】These aluminum end mills suit for CNC routers, any brands of plunge routers with 1/8" collet..
Check StockSpeTool 1/4 End Mill for Aluminum 3 Flutes CNC Spiral Router Bit for Aluminum Cut Non-Ferrous Metal Upcut 2.5 inches Long 5 Pieces
- 【SPECIFICATIONS】End mills for aluminum with 1/4” shank, 1/4” cutting diameter, 3/4” cutting length and 2-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
- 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
- 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
- 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
- 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/4" collet..
Check StockSpeTool 1/8 End Mills for Aluminum 3 Flutes CNC Spiral Router Bits for Aluminum Cut Non-Ferrous Metal Upcut 1.5 inches Long 5 Pieces
- 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
- 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
- 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
- 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
- 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/8" collet..
Check StockYG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
- Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
- Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check StockGenmitsu 6pcs 3-Flute Square End Mill for Aluminum Applications, Nano Blue Coat CNC Router Bits, High Feed U-Type Design, for Roughing and Finishing, 1/4’’ Shank, SN06A
- High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
- Cost-Effective: Coming with 6pcs of the 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm/20mm, Overall Length: 50mm/55mm..
- Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
- Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting..
- Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
- Attain excellent production rates thanks to the strong tooth with double relief angles..
- Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machin....
Check StockHHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C
- Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
- Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
- This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
- Shell mills can easily be held with Straight Shank arbors.
- Clearance & relief angels are built into the base.
Check Stock