Reviews T Head Bolt

1-1/2\ T-Slot Bolt

  • Built to last:Compared with mormal stainless steel,it's more antirust and corrosion-resistant.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten..
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place..
  • Application:Widely used for aluminum alloy, rack assembly and clamping lock,T-slot track or wooden groove, but can also be used when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels..
Check Stock

Fel-Pro ES 72856 Cylinder Head Bolt Set

  • Meets or exceeds all original equipment specifications.
  • Application specific design to ensure a perfect fit.
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts.
  • Properly torque bolts per manufactures specifications.
  • Follow recommended tightening sequence for head bolts.
  • Check bolt length for correct application needed.
  • Follow all vehicle manufacturers recommendation procedures for head bolt replacement.
Check Stock

T Track Hold Down Clamps Woodworking T Slot Clamp 20mm Dog Hole Clamp Quick Acting Aluminum Alloy

  • ...gs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it..
Check Stock

DCT Tee Bolt Set – 20 Pack 1-3/4in T Bolts for Woodworking T Track Bolts Jig Bolts 1/4in 20 Thread T Bolt

  • CUSTOMIZE YOUR JIGS, FIXTURES, AND T-TRACK: Experienced woodworkers use jigs regularly to create accurate, repeatable cuts quickly.
  • T SHAPE PROVIDES VERSATILITY: Each piece is precision machined for quality, strength, and accuracy.
  • T shaped head features a 7/16 x 5/8 inch (11 x....
  • BUILT TO LAST: Constructed of grade 2 steel for strength, durability, and longevity.
  • Zinc-plated for resistance to rust and corrosion.
  • PERFECT SIZE FOR YOUR NEEDS: These T slot bolt wood fasteners have a length of 1-3/4 inch (4.4 cm) and a thread per inch of 20.
  • EASY TO USE: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
Check Stock

Stainless Steel T-Bolt T-Slot Bolt T-Shaped Platen Screw GB37 M10 M12 304 1 Pcs M10 45mm

  • Head Size: 19 x 8.5 x 5.5mm/0.75" x 0.33" x 0.22"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt. When installing, put the screw head into the profile groove and turn it 90 degrees to clamp it..
Check Stock

M12X80 T-Slot Bolt 20 pcs.

  • Total Size: 18 x 8 x 25.5mm/0.71'' x 0.31'' x 1.00"(WxTxH).
  • Material: T-Bolts are made from high quality carbon steel, surface is plated with chrome-plated for good rust resistance and better performance high hardness and a long service life.
  • Advantage: T-Shaped Bolts are great to have around for use in wet environments, durability and longevity.
  • Application: 4545 Series Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, machine guards, workstations, etc.
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock

Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)

  • ...gs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it..
Check Stock

uxcell M8x25mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 8pcs

  • Head Size: 10 x 6 x 3mm/0.39" x 0.24" x 0.1"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..
Check Stock

uxcell M8x25mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 10pcs

  • Head Size: 18 x 8 x 5mm/0.71" x 0.31" x 0.2"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..
Check Stock

uxcell M8x30mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 5pcs

  • Head Size: 19 x 8.5 x 5.5mm/0.75" x 0.33" x 0.22"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..
Check Stock

O'SKOOL 5 Star T-Track Knobs Kit 4-Pack with Star Threaded 1/4-20 Knobs, Bolts and Washers

  • INCLUDES: (4 ) Red 5star knobs 1/4”-20 UNC threaded knobs , (4 ) hex head bolts 1/4”UNC X 3 inch,(4 ) washers, (4 ) plastic washers.
  • Red knob kit with an ergonomic design for smooth handling and comfort . Stainless steel hex head bolt has pullout resistance and durability. Washers for your convenience，It is mainly used to reduce pressure and friction..
  • EASY TO USE : Tighten the knob, bolts, and washers arranged together to help secure and enhance your woodworking jig assemblies..
  • HOW TO USE : To use on your T-track, insert the head of a bolt into the track with a washer and align it with the threaded knob.
  • APPLICATION: This is for a retaining clip for use with a T-track slot, fixtures, and splint..
Check Stock

MroMax M8-1.25x16mm T Slot Bolts Carbon Steel Drop-in Stud Sliding Screw Bolt Metric Hammer Head Bolt for European Standard 40 Series Aluminum Extrusions Silver 20Pcs

  • Head Size: 18 x 8 x 5mm/0.71" x 0.31" x 0.2"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..
Check Stock

L-A M8 x 25mm Thread T Slot Drop-in Bolt T-Bolt Hammer Head Bolt T Screw Stud for 4040 Series Standard 8mm T-Slot Aluminum Extrusion Profile (4040 Series, 20 Pcs)

  • Head Size: 10 x 6 x 3mm/0.39" x 0.24" x 0.1"(L*W*T).
  • Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
  • Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
  • Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..
Check Stock