Reviews Swivel And Rotating Fittings

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

EVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
  • 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Yard Butler Swivel Hose Reel Garden Hose Holder Wall Mount Heavy Duty with 90 Degree Pivot - ISRM-90

  • LIFETIME GUARANTEE: Stop buying plastic or cheap metal products that don’t hold up over the years.
  • Yard Butler products are designed to last a lifetime and if you have a problem with our tools we make it right.
  • WALL MOUNT ROTATING HOSE REEL holds up to 75 feet of standard 5/8 inch garden hose on the wall and off the ground so it stays neat and tidy.
  • Hose storage reel swings away from wall or fence 90 degrees so you can pull the hose in any direction.
  • EASY REELING: wall mounted swivel hose holder uses the no-leak, Max Flo design for smooth winding so your garden hose is always ready for watering.
  • POWDER COATED STEEL: Heavy-duty and rust-resistant garden hose reel.
  • Patented design with brass fittings holds your hoses strong and steady and reduces kinks for longer life and better watering.
  • 90 DEGREE SWIVEL HOSE REEL measures 13.75 inches high, 13.5-inches wide, 8.6 inches deep, and weighs 8 pounds.
  • Includes a 5 foot supply hose to attach to your hose outlet. Lag bolts for mounting in wood are included.
Check Stock

Valterra D04-0675 20' Silverback Sewer Hose Kit

  • Includes two 10′ sewer hose with rotating fittings and a clear 90° universal sewer adapter.
Check Stock

McKillans Short Pressure Washer Gun with Swivel - High Pressure Water Handle with 3/8" Male Plug and 1/4” Quick Connector Coupler - Power Washer Gun Compatible with Foam Cannon - Car Wash Foam Gun

  • ✅ Swivel Design: Equipped with a swivel inlet that allows your hose to rotate freely during use, prevent annoying kinks and wrestling with your hose..
  • ✅ Preinstalled Fittings: Our guns come with the fittings preinstalled with teflon tape and locktite. Saving you time and effort..
  • ✅ Lightweight Pull Trigger: Hold the pressure washer gun for long durations without getting tired. The snub nose design makes it easy to maneuver with just one hand. The short gun design is very convenient for use with a foam cannon..
  • ✅ Why Us: Our swivel is one of the smoothest in the market. Built with real stainless and brass fittings, unlike the competition. Preinstalled fittings ensuring durability and leak resistance..
  • ✅ Made for Detailers: The McKillans Pressure Washer Gun is the perfect upgrade for your power washer. The integrated swivel helps save you time by keeping your hose tangle free. The small body design makes the gun easy to handle and maneuver. Stop using the long, leaky, and cheap stock gun that comes with your pressure washer, and upgrade to a quality gun. The small design ma....
Check Stock

Spritech PCP Air Compressor,Auto-shutoff 4500Psi/30Mpa Oil/Water-Free Set-pressure Air Gun and Paintball Tank Pump with Water/Oil Separator,Built-in Power Adapter(110V AC or 12V Car Battery)

  • ✅ Swivel Design: Equipped with a swivel inlet that allows your hose to rotate freely during use, prevent annoying kinks and wrestling with your hose..
  • ✅ Preinstalled Fittings: Our guns come with the fittings preinstalled with teflon tape and locktite. Saving you time and effort..
  • ✅ Lightweight Pull Trigger: Hold the pressure washer gun for long durations without getting tired. The snub nose design makes it easy to maneuver with just one hand. The short gun design is very convenient for use with a foam cannon..
  • ✅ Why Us: Our swivel is one of the smoothest in the market. Built with real stainless and brass fittings, unlike the competition. Preinstalled fittings ensuring durability and leak resistance..
  • ✅ Made for Detailers: The McKillans Pressure Washer Gun is the perfect upgrade for your power washer. The integrated swivel helps save you time by keeping your hose tangle free. The small body design makes the gun easy to handle and maneuver. Stop using the long, leaky, and cheap stock gun that comes with your pressure washer, and upgrade to a quality gun. The small design ma....
Check Stock

(Combo Pack) Exact Replacement Rotating Rigid Pipe Adapter and Termination Adapter (Black) - With 3” Hub and 3” Bayonet Lug Fittings

  • COMBO PACK 2-PIECE PIPE ADAPTERS - Inside is 1 piece rotating rigid pipe adapted and 1 piece termination adapter. Both are black and manufactured according to OEM specifications.
  • ROTATING RIGID PIPE ADAPTER - This is an RV waste outlet adapter that rotates for a quick connection. This is a standard-sized 3-inch RV twist-on adapter with bayonet hooks that connects the waste outlet to a 3-inch pipe.
  • TERMINATION ADAPTER - Designed for drain fittings connecting to a sewer hose or cap. One nub end supports a 3-inch twist-on connector with bayonet hooks while the female slip hub end accepts 3-inch ABS pipes that require gluing.
  • 3” HUB AND 3” BAYONET LUG FITTINGS - The rotating rigid pipe adapter has a 3-inch female slip hub and 4 bayonet hooks while the termination adapter has a 3-inch female slip hub and 4 bayonet lug nubs fittings.
  • MADE OF BLACK ABS PLASTIC - Ensure that you are using the correct type of glue when connecting either an ABS or PVC pipe to the adapters’ female slip hub.
Check Stock

Camco 39855 RhinoEXTREME Compartment Hose - 2', Orange

  • Perfect for Tight RV Sewer Compartments: Hose makes hookup easier in tight RV sewer compartments.
  • Superior Abrasion-Resistant Exoskeleton: Hose has superior abrasion resistance due to its exoskeleton design.
  • Improved Compression: Compress, bend or crush the hose and it will maintain its shape.
  • Pre-Attached Swivel Fittings: Fittings swivel for easy connection.
Check Stock

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN6 90 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
  • 6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and servic....
Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

  • The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
  • 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

8Pack 6Inch Lazy Susan Hardware 5/16\ Thick Square Lazy Susan Turntable Bearings Plate, 500lbs Capacity Rotating Swivel Bearing Plate, Lazy Susan Turntable Base for Serving Trays, Kitchen, Table

  • 【Heavy Duty】Made of Galvanised pressed steel construction, anti-rust, anti-corrosion, steady and durable bearings. Enough loading capacity of about 500 pounds..
  • 【Low Noise & Smooth Rotating】Smooth rotating Lazy Susan stand with hidden interior ball bearing track, allowing for smooth rotation and maximum stability, and no noise..
  • 【Easy to Install】Everything can be turned into a Lazy Susan.
  • Just attach the swivel bearing to the plate and you can DIY your own rotating bookshelf, serving trays, kitchen storage shelf, spice rack..
  • 【Wide Application】The Square Lazy Susan hardware can be attached to almost anything, such as dining-table, various furnitures, bar chairs, office swivel chairs, car seats, display stands, TV cabinet, rotating furniture, DIY rotating book racks etc..
  • 【6 Inch Square Swivel Plate】Package Include 8 PCS Square Lazy Susan Rotating Bearing Turntable..
Check Stock

Valterra RV Trailer LLC 5' Dominator Ext Hose Sewer Hose

  • CAMPER SEWER HOSE KIT: The hose kit includes 2 collapsible 10-foot hoses with rotating fittings plus a 90 degree universal sewer adapter and 4 drip caps.
  • COMPACT STORAGE: Hose collapses from 10 feet to 50 inches for convenient storage.
  • LEAK-PROOF: Pre-installed rotating fittings with bayonet hooks ensure a leak-proof system and keep hose flat.
  • CLEAR VIEW ADAPTER: 90-degree sewer fitting is transparent, allowing you to see when draining is complete. It fits 6 different sewer types with a gas-tight steal.
  • DURABLE MATERIAL: 25 mil thick hose material with 135 mil protective beading for added strength.
Check Stock