Reviews Switches And Relays

Veris,Current Switch,SolidCore,Fxd,N.O,250V, H800-HV

  • Hawkeye 800 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern.
  • APPLICATIONS Monitoring on/off status of electrical loads Monitoring direct-drive units, exhaust fans, and other fixed loads Verifying lighting run times On/off status for direct-drive fans, pumps, and process motors More reliable for status than relays across auxiliary contacts Ideal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads Great for lighting status less expensive than 277V relays Removable mounting bracket provides installation flexibility.
  • saves valuable panel space100% solid-state, no moving parts to failPolarity insensitive output5-year limited warranty.
Check Stock

10 Pack 30/40 AMP Waterproof 5-Pin 12V Relay Switch （SPDT）for 12 Volt Automotive Marine Relays for Boats Auto Fan Cars

  • 12V waterproof 5-Pin SPDT Relay Excellent waterproof and dustproof ability, high quality in any weather conditions.
  • 12V 5-Pin SPDT Relay Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87)..
  • SPDT Relay with 40A/30A High Switching Capability,it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to terminal 87 when the relay is activated..
  • 12v relays can operate with anywhere between 9v and 14v,Very suitable for 12V automotive, marine, and machine circuits..
  • These 12V 5-pin relays are rated to handle 30A on normally closed pin 87a and 40A on normally open pin 87..
Check Stock

Veris,Current Switch,Micro,Split-Core,Fixed,NO, H300

  • Hawkeye 300 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern..
  • Applications: Monitoring on/off status of electrical loads. Monitoring direct-drive units, exhaust fans, and other fixed loads. Verifying lighting run time. On/off status for direct-drive fans, pumps, and process motors. More reliable for status than relays across auxiliary contactsIdeal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads. Great for lighting status. Less expensive than 277V relays. Low 0..
  • Ideal for small exhaust fans (not intended to detect belt loss. Removable mounting bracket provides installation flexibility. Monitor status of fans, pumps, motors & other electrical loads. Split-core for fast retrofit installation. Micro housing for tight enclosures..
  • Saves valuable panel space 100% solid-state, no moving parts to fail. Polarity insensitive output 5-year limited warranty..
Check Stock

HELLA 007903001 24V 10/20A SPDT Relay , Black

  • 24 Volt 10/20A SPDT relay for automotive use.
  • The relay can be operated by a dashboard switch or another 24 Volt input.
  • The SPDT change over relay switches electrical load from one use to another.
  • Change over relays are used for switching 2-state applications such as heated rear windows, fan motors, or the movement of a sliding sunroof.
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • ...rs with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wrench kit,oxygen sensor wrench 1/2 drive,oxygen sensor wrench socket..
  • Automotive oxygen sensor removers,the items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!oxygen sensor wrench set,o2 sensor socket wrench,oxy....
Check Stock

70955

  • FEATURES: 12 position terminal block for accessory attachment.
  • 6 40-amp cube style relays (plug-in style).
  • 6 Diodes to prevent LED “field collapse”.
  • Inline 50amp manual resetting circuit breaker.
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery.
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit.
  • Fuse for LVCO which can be removed to bypass the LVCO.
  • High-temp, abrasion resistant wiring cables.
  • KIT CONTENTS: (1) Switch pod w/ 6 Rocker Switches, (1) Switch pod wiring harness, (2) Switch pod mounting brackets, (1) Relay pod, (1) Relay pod power wire, (1) Relay pod ground wire, Mounting hardware.
Check Stock

Tenma 21-8240 Vacuum Desoldering Iron

  • 30 Watt: Powerful enough to remove common soldering mistakes found on small devices. Heats up quickly..
  • Easy Operation: Designed for right or left-hand operation. Quickly heats up and uses a strong vacuum pump to remove solder..
  • Lays flat: When not in use or when in-between jobs, the desoldering pump lays lat with the hot tip elevated to prevent from unwanted burns.
  • Used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, remove relays and other components from printed circuit boards, unsoldering old wires, desoldering computer parts like motherboards, clean alloy on smd components and more..
Check Stock

Voswitch JL300 Lower Dash Switch Panel Compatible with Jeep Wrangler JL JLU 2018 - Current and Gladiator 2020+

  • switch control system is fully programmable .6 switches can be set as Solid ,flash, strobe, momentary..
  • easy to install, no trim no drilling ,plug and play..
  • the regular relays and fuses are replaceable ( not solid state ). maintain the system with low expense..
Check Stock

CAIG Labs, DeoxIT L260-D5 Lithium Grease, 226g Squeeze Tube, Pack of 1

  • Contains, Pack of (1) DeoxIT D5S-6-LMH Spray, 142g, Low-Med-High Valve.
  • Improves Conductivity without Shorting, Removes Oxidation, Lubricates and Protects, Reduces Intermittent Connections.
  • Reduces Arcing & RFI, Reduces Wear & Abrasion.
  • Ideal for applications in all industries.
  • Audio/Video, Computers, Heavy Equipment, Automotive, Communications, Marine, Electrical, Energy, Photography, Security, Medical, Avionics, etc..
  • USES - ELECTRICAL: ALL Metal Connections.
  • Batteries, Light Bulbs, Switches and Relays, Jacks and Plugs, Harnesses, Grounding Blocks, RCA jacks, XLRs, USB, HDMI, Ethernet, etc..
Check Stock

DeoxIT L260D Grease w/copper particles 1oz (28g) squeeze tube - infused with DeoxIT D100L

  • Good lubrication, excellent wear resistance, excellent pressure resistance, excellent oxidation (galvanic corrosion) protection, high dripping-point characteristics. Operating temperatures: -40oC to 260oC..
  • Use copper particles when you require (conductivity) to assist in oxide and corrosion breakup and need good lubrication.
  • Use in areas that two contacts will not touch and possibly short. Example: disconnect switches or large connectors and relays..
Check Stock

DeoxIT D100L-25C Precision Needle Applicator, More Than A Contact Cleaner, 25 mL, Pack of 1

  • SEE IMAGES FOR FULL DESCRIPTION AND INFORMATION.
  • Improves Conductivity without Shorting, Cleans, Deoxidizes, Lubricates and Protects, Reduces Intermittent Connections.
  • Reduces Arcing & RFI, Reduces Wear & Abrasion.
  • Ideal for applications in all industries.
  • Audio/Video, Computers, Heavy Equipment, Automotive, Communications, Marine, Electrical, Energy, Photography, Security, Medical, Avionics, etc..
  • USES - ELECTRICAL: ALL Metal Connections.
  • Batteries, Light Bulbs, Switches and Relays, Jacks and Plugs, Harnesses, Grounding Blocks, RCA jacks, XLRs, USB, HDMI, Ethernet, etc..
Check Stock

Permatex Bulb Grease (09141)

  • Lithium grease, precision lubrication, oxidation/corrosion protection, excellent wear and pressure resistance..
  • No particles: Provides maximum lubrication for relatively clean surfaces. Other particles available.
  • copper, aluminum, quartz, graphite, graphite/quartz and Teflon..
  • High dripping point grease, Temperature range.
  • -40 to 260 C. Greases improve performance and reliability of electrical contacts and mechanical components that require precise lubrication..
  • Ideal for applications in all industries.
  • Audio/Video, Computers, Heavy Equipment, Automotive, Communications, Marine, Electrical, Energy, Photography, Security, Medical, Avionics, etc..
  • USES - ELECTRICAL: Antennas, battery terminals, Buss bars, commutators, conductor rails, conductors, contactors, disconnects, drying & processing equipment, high amperage/high voltage, lifts, cranes, robotics, power tools, relays & switches, etc. USES - MECHANICAL: Bearings, doors/closures, chain/sprockets, hatch closures, O-rings/seals, linear motion systems, plugs, rack & pinion, screw devices, slide bushings, sliding parts, tracks/guides/rails, threaded closures, worm gears, etc..
Check Stock

Isolation Amplifiers 4.5 - 5.5 SV 8 dB (5 pieces)

  • Isolate and amplify the weak control signal (only a few milliamps of current) by photoelectricity, and finally output a higher power control signal to directly drive the motor, contactor, solenoid valve, etc..
  • The response time is as low as milliseconds and there is no limit on the number of switches. It can directly replace traditional relays, reducing maintenance time and costs..
  • Photoelectric isolation is used between the input stage and the output stage, and the two stages are completely independent, which effectively avoids the instability caused by mutual interference of the system and effectively protects the output node of.
  • Made of high-quality electronic components, stable and reliable performance..
  • Hole punching and PCB module mounting are more convenient..
Check Stock