Reviews Switch For Water Pump

mistcooling 250 PSI Misting Pump

  • ... load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

Honda Power Equipment WSP73 3/4 HP 115V Submersible Water Pump, 50FT Cord New

  • 【AUTO FLOAT SWITCH】Equipped with an automatic float switch. When the water level higher than the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power.If the water level is higher than the pump again,it will work again..
  • 【POWERFUL SUMP PUMP】3040 GPH, 1/3 HP, Max Lift: 29 ft.
  • Acquaer submersible clean/dirty water pump moves up to 3040 gallons per hour rating tackles any draining job at a fraction of the time. Perfect for water supply, drainage in deep well, field irrigation garden irrigation and greenhouses..
  • 【INGENIOUS DESIGN】The higher base plate and top suction design helps eliminate air locks and filters debris. For safety, the pump motor has an automatic thermal protector that will turn off the pump if it becomes too hot automatically. Once the thermal protector detects that the pump has cooled to a safe temperature, it will allow the pump to operate normally..
  • 【HIGH-QUALITY MATERIALS】The submersible water pump is made of high-strength, corrosion-resistant reinforced thermoplastic materials. It will provide trouble-free service for a long time when properly installed..
  • 【CUSTOMER SATISFYING GUARANTEE】 Acquaer sump pump comes....
Check Stock

WaterWorker 25009 20Gal Vertical Well Tank, 20-Gallon

  • [Compatibility]: Water Pump Controller is suitable for self-priming pumps, jet pumps, garden pumps, clarified water pumps, centrifugal pumps, etc. The electric switch is used in the water system to automatically start and stop the pump. The switch automatically detects water and stops the pump when there is water shortage to protect the pump from dry burning. Run..
  • [Properties]: Water Pump Switch input voltage: 110V, maximum power: 1.1KW-1.5KW, maximum current: 10A, Max Working Pressure: 10Bar.
  • [Professional manufacturing]: Manufacture in strict accordance with the original factory standards, stable performance, excellent workmanship, strict factory quality control and testing, professional manufacturing, high performance and high reliability..
  • [High performance]: Water Pump Controller is made of high-quality materials, IP65 waterproof, has good wear resistance, high temperature resistance, corrosion resistance, aging resistance, can ensure maximum strength and durability, and long service life..
  • [Easy to use]: Easy to install, easy to use, plug and play, can directly replace the old or damaged, to provide you with the greatest convenience..
Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

  • Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
  • - 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
  • - 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
  • Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
  • Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
  • However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
Check Stock

COFORCEFLO 110V Self Priming Water Pump ,5.0 GPM 70 PSI Water Diaphragm Pump,Water Booster Pump with Built-in Pressure Switch for Home Kitchen Bathroom RV Marine Yacht Garden Hose (AC 115V 5.0GPM)

  • [Utility Diaphragm Pump Features] 110V Water Pump features 5.0 gallons per minute water flow, the fast speed at which the water gets released makes using it a breeze. Pressure switch is set to 70PSI 4.8Bar 1.8 Amps..
  • [Widely Applications] 115 volt water pump can be used for Kitchen, bathroom,Marine, Yacht, Caravan and courtyard long-distance pumping, watering and cleaning..
  • [Run Dry & Thermal Overload Protection] 110 Volt Self Priming RV AC Wash down Pump can run dry for a short time, reducing the risk of motor burnout..
  • [Smart Pressure Switch] Built-in automatic pressure switch.The pump turns on when the water flow is on and stops when the water flow stops.
  • [Strict factory test] When the pump leaves the factory, a small amount of water may remain in the pump. This is due to strict tests on the pump to ensure quality and meet the testing standards..
Check Stock

Oswerpon Water Diaphragm Pump, 115V AC Water Pressure Booster Pump, 5GPM 55PSI with Power Plug, Self Priming RV Water Pump, Electric Water Pump Filter for Kitchen Bathroom RV Marine Yacht Garden Hose

  • ...rpon Water pressure booster pump use new design high-quality motor with high performance，stable and durable, smooth self priming with silent operation and can run dry without damage, thermal overload and ignition protection( temperatures above 70℃/ 158℉ temporarily stop working )..
  • ✔️ 【Automatic Pressure Switch】:Electric water booster pump equip with an on demand pressure switch which turns it on immediately when the faucet on.In addtion, this transfer water pump has self-priming function,height up to 125 feet, can achieve high flow up to 5GPM..
  • ✔️ 【Multiple Applications】:The water pressure pump is compact and easy to install for a variety of applications. Great for use in kitchen and bathroom. It is also the great partner of camper, sprayer, garden sprinklers, fertilizers, sprinkler faucet and agricultural irrigation as you like..
  • ✔️ 【Awesome Customer Service】:Provide 1-year warranty. If you are dissatisfied with your purchase for any reason, you can c....
Check Stock

Bottle Water Pump, Electric Drinking Water Pump 5 Gallon USB Charging Portable Water Dispenser Water Bottle Switch for Home Kitchen Office

  • 【Safety & health】 BPA free drinking water dispenser, food grade silicone hose, 304 stainless steel, high density ABS plastic, no toxic, and no smell..
  • 【USB Rechargeable Water Dispenser】Built in rechargeable 1800mAh battery. Can used for 30-40 days or around 4-5 bottles of 5 gallon water once full charged. No need to charge every day. It can be taken along anywhere for water dispensing. Use it Indoor or Outdoor..
  • 【High Compatibility】The drinking water pump is suitable for gallon barrels with a 2.16-inch (5.5cm) neck. Don’t need to pry the lid. So it fits most water bottles and for 5 gallon water bottle..
  • 【Easy to Use】Simply fasten the small pump on the bottle mouth. One switch operation, totally hassle free even for kids and elders. Press once switch, pump 0.16 gallons of water and stop automatically. Press and hold for 3 seconds to switch the water pump to pump water all the time..
  • 【100% Guarantee】Automatic water dispenser come with 60 days money back guarantee and lifetime warranty. A friendly customer service is always waiting you. An absolutely risk-free purchase..
Check Stock

BURCAM 300507S 1/4 HP Automatic Submersible Utility Pump, Black

  • 1/4 HP AUTOMATIC UTILITY PUMP: Automatic ON and OFF submersible utility pump is designed for use in residential applications for water transfers. Ideal for draining basements, spas, pools, flat roofs, and window wells..
  • AUTOMATIC UTILITY PUMP: The electronic switch monitors the water levels while pumping so that you can simultaneously do other things. The automatic switch activates the pump at approximately 1-3/4 inches of water and continues to power the pump for approximately 1 minute after reaching its shut off level to allow the pump to drain down to 1/8 of an inch..
  • UTILITY PUMP CONSTRUCTION: Thermoplastic body is corrosion-resistant. The pump discharge is garden hose compatible for easy hook up and includes a barb adapter for ¾” flexible pipe..
  • PERFORMANCE: The maximum head is 15 feet and the capacity is up to 1200 gallons per hour..
Check Stock

Pump, Grinder, 2 HP, 15a

  • ...08/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
  • GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
  • Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM of Water @ 20 Ft. of Head: 50 Shaft Seal Material – Pumps: Silicon Carbide, Viton Agency Compliance: CSA C/US Duty: Continuous Voltage – Pumps: 208/230VAC Discharge NPT: 1-1/4″ F Max. Diameter Solids: 2 in Duty Cycle: Intermittent.
  • Switch Actuation: Tether Float Flow Rate @ 40 Ft. of Head: 48.0 gpm Rated Voltage: 208/230VAC Discharge Gender: Female Flow Rate @ 60 Ft. of Head: 42.0 gpm Discharge: 1-1/4″ FNPT Body Material: C....
Check Stock

Pressure Control Switch, 40-60Psi 110V-230V Adjustable Double Spring Water Pressure Control, Pump Pressure Switch for Water Pump, Well Pressure Switch For Home And Garden To Use

  • ADJUSTABLE PRESSURE FUNCTION: You don't have to worry about the pressure of the pump being uncontrollable. You can adjust the pump pressure through this switch. You can set the pump pressure that you think is suitable, which is perfect for the working needs of the pump..
  • EXCELLENT PRESSURE SWITCH: This is a water pump pressure control switch that can control the water pump used in the home to control the water pressure of the pump..
  • SUITABLE FOR MOST PUMPS: Suitable for most pumps, such as self-priming pumps, water injection pumps, garden pumps, etc. It is also suitable for hot and cold water automatic pumps etc.
  • MADE OF HIGH-QUALITY MATERIALS: The Pressure Control is made of high-quality materials and is strong and sturdy. It can be used for a long time, so you can use it with confidence..
  • EASY TO USE: The water pressure control is easy to use, stable in performance, protects the motor, saves power, and can be used for a long time..
Check Stock