Reviews Swiss Bearing Lubricant
Premium 1 Ounce Skateboard Bearing Lubricant | Bearing Oil, High Grade Skate Bearing Lubricant, Super Smooth Bearing Lube for Skateboards, Longboards, Scooters and Roller Skates
- 【HIGH QUALITY】This grade-A skateboard bearing lubricant is specially designed for skateboards. This Bearing Oil has low viscosity and superior lubrication effect. Only 1-2 drops can lubricate the entire bearing..
- 【ACCURACY & SAFETY】The precision APPLICATION NEEDLE of our skateboard bearing lubricant makes you get accurate use without making a mess. The skate bearing lubricant is equipped with a CHILD SAFETY BOTTLE CAP, which can never be opened by babies and toddlers..
- 【EXTENDS BEARING LIFE】This bearing lube for skateboards can quickly penetrate into the bearing to play a role of lubrication and rust prevention. Protect bearings from wear and tear, greatly extend bearing life and make your bearings faster..
- 【FULLY COMPATIBLE】Our bearing oil is suitable for most skateboard brands and skateboard types, including longboards, skateboards, scooters and roller skates..
- 【100% CUSTOMER SATISFACTION GUARANTEE】Order with confidence! Every skateboard bearing lubricant has been tested strictly to ensure higher quality. If you are not completely satisfied with the product, we will give you a full refund..
Check StockReel Butter Bearing Lube- 1 oz
- This bearing lubricant is for use on all saltwater and freshwater reels to keep them performing at their best even after years of use.
- Due to its ultra low viscosity, the bearing lubricant works thoroughly into all bearing components and remains in place.
- Preserves your reel’s bearings by providing corrosion protection to prevent bearing noise, grinding, and reel performance issues.
- Can be used on other mechanical equipment.
- cleans by flushing out all dirt and foreign debris picked up over time.
- This bearing lubricant is not a graphite-based lubrication system.
- it is 100 % synthetic and offers reliable performance over a wide range of temperatures.
Check StockARCTIC P8 – 80 mm Case Fan, Pressure-Optimised, Very quite motor, Computer, Fan Speed: 3000 RPM – Black
- OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P8 is particularly suitable for use on heatsinks and radiators.
- HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved.
- LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
- REDESIGNED FAN BLADES: The P8 fan features completely redesigned fan blades and is optimised for high static pressure.
- TECHNICAL DATA: Fan speed: 3000 RPM, Airflow: 23.4 CFM/39.76 m³/h (@ 3000 RPM), Noise Level: 0.3 Sone (@ 3000 RPM), Pin: 3-pin.
Check StockARCTIC P12 (5 Pack) - 120 mm Case Fan, Pressure-optimised, Quiet Motor, Computer, Fan Speed: 1800 RPM - Black
- OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P12 is particularly suitable for use on heatsinks and radiators.
- HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved.
- INNOVATIVE DESIGN: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level.
- LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
- TECHNICAL DATA: Fan speed: 1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 3-pin.
Check StockDELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual
- Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
- Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
- Set screw locking for secure attachment to shaft.
- Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
- Grease fitting on the housing for reapplying lubricant.
Check StockSKF F4B 100-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 2-3/4\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity
- Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
- Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
- Set screw locking for secure attachment to shaft.
- Contact seals on both sides of the bearing keep lubricant in and contaminants out.
- Grease fitting on the housing for reapplying lubricant.
Check StockSKF F4B 200-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 2\ Bore, 5-1/8\ Bolt Hole Spacing, 9800lbf Dynamic Load Capacity
- Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
- Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
- Set screw locking for secure attachment to shaft.
- Contact seals on both sides of the bearing keep lubricant in and contaminants out.
- Grease fitting on the housing for reapplying lubricant.
Check StockSKF F4B 108-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity
- Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
- Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
- Set screw locking for secure attachment to shaft.
- Contact seals on both sides of the bearing keep lubricant in and contaminants out.
- Grease fitting on the housing for reapplying lubricant.
Check StockSenston Ceramic Skateboard Bearings High Speed Double Shielded 608 RS ABEC-11 8 Pack Set for Skateboard Trucks Scooters Wheel Roller Skate
- What you get: 8 pcs 608-2RS ceramic ball bearing in a steel box.Made of high quality carbon steel with long durability with heavy load and strong resistance for daily use impacts..
- Standard solid bearing: All size in standard 22*8*7mm, black chrome shell never fray or stain. Pre-lubricant ceramic ball can run more smooth and longer than ordinary steel ball bearings. Nylon ball base can suffer more bump or fall..
- Smart design for strong bearing: Double rubber shield cover in bronze, resist outside impact, prevent dust or sand and stone from breaking into bearing, damage ball inside. ABEC-11 certification made it better than any other competitors you ever seen..
- Widely use: Not only this set of ceramic 608 2RS bearing for skateboard, it can apply widely on sports like kick scooter, roller skate and so on, but also on your life: spinner, baby stroller, hand cart, truck dolly. It’s your best option when you want to have some 608 bearings..
- Reminder: The bearings is made with slight lubricant oil, change bearings with gloves to prevent moist from your hand for better performance..
Check StockSKF F4B 108-FM Ball Bearing Flange Unit, 4 Bolts, Eccentric Collar, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing Width, 5310lbf Dynamic Load Capacity
- Cast iron flanged housing for vibration damping and structural rigidity.
- Double-sealed, deep-groove ball bearing insert with an extended inner ring for applications with radial, thrust, and combined loads.
- Acrylonitrile-butadiene rubber (NBR) contact seals on both sides of the bearing keep lubricant in and contaminants out.
- Eccentric locking collar for securing the bearing onto the shaft.
- Grease fitting on the housing for reapplying lubricant.
Check StockSKF F4B 104-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/4\ Bore, 3-5/8\ Bolt Hole Spacing, 5730lbf Dynamic Load Capacity
- Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
- Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
- Set screw locking for secure attachment to shaft.
- Contact seals on both sides of the bearing keep lubricant in and contaminants out.
- Grease fitting on the housing for reapplying lubricant.
Check StockSKF F4B 103-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-3/16\ Bore, 3-1/4\ Bolt Hole Spacing, 4380lbf Dynamic Load Capacity
- Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
- Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
- Set screw locking for secure attachment to shaft.
- Contact seals on both sides of the bearing keep lubricant in and contaminants out.
- Grease fitting on the housing for reapplying lubricant.
Check StockSKF F4B 204-TF Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Seals with Flingers, Cast Iron, 2-1/4\ Bore, 5-5/8\ Bolt Hole Spacing, 11840lbf Dynamic Capacity
- Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
- Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
- Set screw locking for secure attachment to shaft.
- Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
- Grease fitting on the housing for reapplying lubricant.
Check Stock