Loos Cableware MS21259-2RH Stainless Steel Stud with Thread Cover Full Length Of Shank
- Convenient package of one swage fitting for 1/16" cable.
- Stainless Steel Stud Fitting for swaging on to Wire Rope and Aircraft Cable.
- Follow manufacturer's swaging instructions.
Check Stock
CKE 40 Pack Stainless Steel Invisible Receiver and Swage Stud End for 3/16 Inch Cable Railing, Deck Stair Threaded End Fitting for Wood & Metal Post
- Features: These fittings are used for 3/16" wire rope cable and compatible for installation on exterior decks, marine rigging, or interior applications. With a inner hexagon screw on the top. Invisible and concise appearance after being installed..
- Marine Grade Material: Made of T316 Marine Grade stainless steel, which with excellent resistance to rust and seawater, high tensile strength and anti-fatigue strength weatherproof. 【CKE Cable Railing Promised】All of CKE T316 Cable Railing will not rust in normal using situation even after installed 10 years, if not, we will offer warranty with full refund..
- Size: Overall length of the Receiver: 2.25", Threaded stud length: 2.75", Assembled and Fully Threaded size: 2.95"..
- Applications: Provide for a DIY cable railing project, it can be used on all sorts of posts in wood or metal. Suitable for indoor or outdoor applications..
- Package: 40 Pack Stainless Steel Invisible Receiver and Swage Stud End + 1 Pack Allen Wrench.
Check StockSwage It® S650C Primer Pocket Swager V2 - Large & Small Primer Combo - for The Dillon XL650
- Use your case feeder and swage over 1000 rounds per hour..
- Engineered to properly swage on the Dillon XL650..
- Our swager actually re-sizes the primer pocket and adds the correct fillet..
- No need to remove the rotary primer disk which means that you can swage in a matter of minutes without the need of time consuming disassembly of the primer system..
- The easiest setup available to Swage on your Dillon XL650!.
Check StockHilmor 1839022 Swage Expander Head - 1-1/8 HVAC Swage Tool and Pipe Bender Accessory
- SWAGE EXPANDER HEAD: A variety of heads available to make a picture-perfect swage.
- CORRECT SIZING: Find the size that works for you. Expander heads range from 3/8" to 1-5/8".
- COMPATIBLE: Use with hilmor's Compact Swage Tool and Pocket Size Deburring Tool.
- VERSATILE: For use with soft metals - Copper, Steel, Aluminum, Brass tubes.
Check StockSwage It® S750C Primer Pocket Swager for Large and Small Primers - for The Dillon 750, XL750, XL-750
- This will remove the crimp in the primer pocket that is common in military brass. This will mount to your press and if you use a case feeder you can swage over 1000 rounds / hour!.
- Engineered to properly swage on the Dillon 750, XL750.
- Our swager actually re-sizes the primer pocket and adds the correct fillet..
- The easiest setup available to Swage on your Dillon XL50!7.
Check StockHilmor 1839015 Compact Swage Tool Kit - HVAC Tools and Equipment, Black
- SWAGING TOOL: Combination of power and control makes this ideal for HVAC/R instillation, maintenance, and repairs. Can swage 1-5/8″ tubing to 5/16″ without a crack. Includes a deburring tool, designed to remove sharp edges and burrs.
- SINGLE HAND OPERATION: One handed setup made possible by an innovative hydraulic mechanism and release button. Convenient and comfortable design. Propietary pistol design, combined with a weight of only 8.5 lbs, reduces user fatigue.
- TO USE: Select the correct head, place it on the tool and make a quality swage. Simply press release trigger for easy tube release, ensuring no metal damage.
- EXTREMELY VERSATILE: The pistol shape design means it can fit in the small, hard to reach areas.
- INCLUDES: Swage body, deburrer, kit box, and 5 expander heads (3/8″, 1/2″, 5/8″, 3/4″, 7/8″).
Check StockWostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench
- 【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
- 【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
- 【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
- 【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
- 【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....
Check Stock
Muzata 60Pack Cable Railing Kit Hand Swage Threaded Stud Tensioner for 1/8" Cable for 2x2 Metal Post Deck Stair Cable Railing Hardware Terminal T316 Stainless Steel Marine Grade CR23, CA6
- Wide Application- This threaded stud tensioner is suitable for 2"x2" metal and aluminum posts. Overall length 4 1/16", thread length 1 11/32". If you use the hand swage fitting on the post size less than 2", you can cut off the extra threads with a power cutting tool. If you use it on a wood post, you need to drill a hole with a 1/4"drill bit. Package includes: 60packs tensioner, 1pc 1/4"drill bit, 1pc bent wrench.
- Level and Angle Installation -This cable railing kit is suitable for both level and angled sections. 30 degree angled beveled washer Muzata CR25 is needed for stairs installation. You can search MUZATA CB15 to find individual end cap nuts to cover this hand swage tensioner to make your cable railing project more unique.
- Marine Grade- This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
- Pre-Designed System- We pre-designed a cable railing system to help you construct a cable railing system that includes everything you need: cable railing post PS01 PS02 PS32, handrail HT10, cable railing tensioner CR23, 30° angle washer CR25, fixed end CR07, adhesive sleeves CR66, protector sleeves CR72, hydraulic crimper and c....
Check StockDillon Precision 21079 XL 650 Casefeeder Small Pistol 110v SM Plate 21073 97074
- The Super Swage 600 comes with: Large and small swage rods, .22 and .30 caliber backup rods, A 45ACP adapter..
Check StockRectorseal 87011 Pro-Fit Precision Swaging Kit
- Stopper ensures a consistent length of the flare/Swage surface.
- Tip guides the bit into the tube & forms a standard 45° flare or consistent Swage.
- Standard 1/4" hex shank fits directly into most power tools without adapter.
Check StockLORESO Brake Line Flaring Tool Kit with Swaging Tool Set for 45° Single Flares on Copper Aluminum Brass and Soft Steel Lines Professional Repair and Replacement
- Professional Flaring and Swaging Tool Kit – A full-service brake line kit with swage tool and other essential accessories this brake line repair kit....
- Versatile Equipment Compatibility – Our brake line and swage tool kit can be used in copper, aluminum, brass, magnesium, and soft steel lines to....
- Expanded Sizes to Suit Every Job – This 45° flaring and swaging kit with cones, bars, fittings, tube cutter, and ratchet wrench features sizes....
- Compact, Portable Storage Case – Each flaring and swage tool set comes with a heavy-duty storage organizer to make it easier to use in a....
- Trusted Quality, Durability, and Resilience – Here at LORESO we make tools that support rugged jobs and precision craftsmanship which is why every....
Check Stock
Super Stars Hydraulic Copper Pipe Expander Tube Expander HVAC Swaging Tool Kit, with Tube Cutter, Deburring Tool and 7 Expander Heads for 3/8 to 1-1/8 Inches Copper Pipes
- 【SWAGING TOOL】The hand-held high pressure hydraulic pump generates enough power makes this ideal for HVAC/R instillation, maintenance, and repairs. Can swage 3/8" tubing to 1-1/8" without a crack. Includes a deburring tool, designed to remove sharp edges and burrs.
- 【SINGLE HAND OPERATION】One handed setup made possible by an innovative hydraulic mechanism and release button. Convenient and comfortable design. Proprietary pistol design reduces user fatigue.
- 【HOW TO USE】Select the correct head, place it on the tool and make a quality swage. Simply press release trigger for easy tube release, ensuring no metal damage.
- 【ENHANCE A QUALITY JOB】Eliminates couplings, reduces brazing and number of joints.
- Suitable for Copper, aluminum and soft steel tubing using hydraulic power.
- 【PACKAGE INCLUDES】1x Swage body, 1x deburrer, 1x kit box, 7x expander heads (3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8").
Check StockMastercool 71600-A Blue Hydra-Swage Tube Expander Kit,Black
- DO NOT ACCEPT IMITATIONS: This is the original Hydra-Swage.
- FABRICATES AND EXPANDS: Copper, aluminum and soft steel tubing using hydraulic power.
- HAND-HELD HYDAULIC PUMP: Create perfect swages on the job while generating the power necessary to expand tubing up to 1 1/8”.
- ENHANCE A QUALITY JOB: Eliminates couplings, reduces brazing and number of joints.
- COMPLETE KIT: Consists of expander heads 3/8, ½, 5/8, ¾, 7/8, 1 and 1 1/8”, hydra-swage, adapter and inner-outer reamer.
Check Stock
