Reviews Suspension Bushing Tool

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

bimiti Rear Suspension Control Arm Trailing Arm Bushing Tool Removal Tool Kit for Ford Focus Mazda Volvo Bushing Press Kit

  • 【Application】This rear suspension bushing removal tool has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, suitable for Mazda 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012..
  • 【Performance】This rear suspension bushing kit has excellent performance, protects your car from scratches, no marks or scratches, and is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to use】Designed for the removal and installation of bushes and bearings, this rear trailing arm bushing tool is easy to use and install without the need to remove the rear axle, saving a lot of time..
  • 【Material】This control arm bushing removal tool is made of selected carbon steel. The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】This rear control arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we wil....
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

OTC Tools 4247 Hendrickson Suspension Bushing Master Tool Kit

  • Reduces service time to remove and install HD rear suspension bushings substantially.
  • Works on Hendrickson Primaax EX, Comfort Air and FCCC V-Ride Pivot and D-Pin suspension bushings.
  • Tool mounts to suspension for less weight to hold.
  • Tool includes adapters to align it to bushing axis to reduce likelihood of improper installation.
  • Includes a high-force 25-ton cylinder for hard-to-remove bushings and also includes the OTC Stinger Series 2510A Air/Hydraulic Pump, with a Hose and Coupler.
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
  • Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
  • [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
  • Ball joint compressor control arm bushing press kit may even fit your tractor.
  • [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock

BTSHUB Rear Trailing Arm Bushing Remover and Installer Tool Bushing Press Kit Copatible for Honda & Acura

  • FUNCTION: The Rear Trailing Arm Bushing Remover Tool is used for replacement of the rear trailing arm bush (moveable metal suspension pieces on the....
  • APPLICATION: For Honda or Acura vehicles with trailing arm bushings.
  • Suitable for Honda – Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol....
  • EASY STORAGE: Comes with a premium well-organized box for easy storage and transport. The tool is stored safely in a beautifully packaged case that....
  • UNIQUE DESIGN: Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to....
  • HOW TO USE: Remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen (not remove) the toe link....
Check Stock

Dorman 924-043 Suspension Subframe Bushing Kit Compatible with Select Models

  • Direct replacement - this suspension subframe bushing kit is designed to match the original hardware required to repair the subframe to restore ride....
  • Ideal solution - this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

DEF Door Bushing Removal Tool Hinge Liners for Wrangler JK JKU JL JLU Gladiator JT 2007-2021 (Removal Tool and 2 Pins)

  • Fit: Door Bushing Removal Tool for Wrangler JK JL 4 Door 2008-2019 ..
  • Material: Made of stainless steel, great performance and repeated use are guaranteed. High quality bushings never rust .The inserts are made of plastic..
  • Function: These door pin guides help you line up your door pins and put your doors back easily. The door bushing removal tool helps to disassemble your Wrangler corrosive hinges..
  • Usage: By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally disassembled. If you find that it is not suitable for your car，use some type of grease or lube for the new bushings and use a rubber mallet to get them in place. Maybe it works well..
  • Package include: 1 silver door bushing removal tool, 8 bushings and 2 Pins.Door Bushing Removal Tool did not fit TJ.
Check Stock

ALN Suspension 4 Front Lower Control Arm Bushing Pontiac Torrent 02-09

  • ALN Suspension 4 Front Lower Control Arm Bushing Pontiac Torrent 02-09.
  • PREMIUM QUALITY UNDER IATF16949 OE STANDARDS. ALN SUSPENSION HAS MORE THAN 25 YEARS EXPERIENCE IN MANUFACTURING SUSPENSION PARTS..
  • 3-5 DAYS DEPENDS ON YOUR LOCATION AND ADDRESS. (See product detail).
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Door Pin Guides Hinge Liners and Door Bushing Removal Tool Kits (8 Door Pin Guides) 17Pcs For 2007-2020 Jeep Wrangler JK JKU JL JLU

  • DURABLE MATERIA:The Door Bushing Removal Tool was constructed with strong iron.Advanced CNC machined aircraft grade stainless steel structure guides and durable ABS plastic integral molding process bushings, anti-corrosion and never rust..
  • FITMENT:Fit for Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited 2007-2020. (Door Bushing Removal Tool did not fit TJ).
  • WIDELY USEFUL:These door pin guides help you line up your door pins and put your doors back easily.The door bushing removal tool helps to remove your Jeep corrosive hinges.By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally removed..
  • QUANTITY INCLUDED:8*Door Pin Guides,8*Door Hinge Liners,1*Door Bushing Removal Tool..
  • 100% SATISFACTION:If you are not satisfied with our kit,please contact us,we will try our best to solve your problem..
Check Stock

Long and Short Polyurethane Bushing Replacement for Polaris Sportsman 335 400 400L 450 500 570 800 1996-2018 Replace # 5436973 5439270 - Control Arm Bushing Kit

  • 【FIT THE FOLLOWING MODELS】-- Compatible with 1998-2000 Polaris Sportsman 335 | 1996-2014 Polaris Sportsman 400 | 2006-2018 Polaris Sportsman 450 | 1996-2013 Polaris Sportsman 500 | 2014-2018 Polaris Sportsman 570 | 2005-2014 Polaris Sportsman 800..
  • 【HARD CONTROL BUSHING】-- With construction of heavy duty material, it can withdraw a lot of press without bending..
  • 【POWERFUL FUNCTION】-- The control bushing mainly mounts on car suspension and steering joints to absorb road bumps, control the amount of movement in the joints and reduce noise and vibration；While it is NOT a genuine a arm bushing part, it is an ideal replacement designed to fit or work like the factory part..
  • 【QUALITY ASSURANCE】-- Our bushings are high quality polyurethane bushings. This material is stronger than original ones. And it also lasts longer than the ones made of rubber. Thus, it is not easy to get broken or bent and you can use it for a long time to save your pocket money..
  • 【BUY WITH CONFIDENCE】-- Order from Skyee-blue for a true worry-free shopping experience. The bushing comes with one year warranty. If the a arm bushing ever fails on your Polaris, just feel free to contact us for a replacement..
Check Stock