Reviews Surface Resistance Meter

Megger 212159 Analog Hand-Crank Insulation Tester, 2,000 Megaohms Resistance, 100, 250, 500, 1000 V Test Voltage

  • Insulation tester for measuring insulation resistance and voltage.
  • Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
  • Analog meter with manual range selection for flexibility of use.
  • Guard terminal to eliminate surface current leakage.
  • Safety rated to European Standard EN61010-1 Category II, 300V and Category I, 600V.
Check Stock

COAST® HX3 80 Lumen Dual Color (White & UV) Magnetic LED Clip Light with Beam Rotation, Black

  • DUAL COLOR WHITE & UV BEAM: See beneath the surface. The dual-color white & UV beam combines an all-white utility beam for general use with a UV light for detecting Fluid leaks or checking security features on currency and identification cards..
  • MAGNETIC CLIP: Go hands-free with your light. The magnetic tail clip integrates a high-powered magnet into the clip of your light so that you can attach the light to a magnetic surface and keep using the light without holding it..
  • SPECS: 80 Lumen, 13 meter (42 ft. ) beam distance and 3.75 hour runtime. Tested and rated to ANSI/Fl1 standards..
  • TOUGH & RELIABLE: Backed by the COAST Lifetime Warranty against defects in materials and workmanship. IP54 rated design for water resistance and durable body for 1-meter drop protection..
  • INCLUDED ACCESSORIES: 2 x AAA alkaline batteries.
Check Stock

Sports Watch Men s Stainless Steel Quartz with Strap Black

  • 5 months on rechargeable battery (Operation Period with normal use....
  • Quartz Movement. Countdown range- 24 hours. Countdown start time setting range- 1 minute to 24 hours (1-minute increments and 1-hour increments).
  • Water resistant 200m (660ft): in general, suitable for professional marine activity and serious surface water sports, but not diving.
Check Stock

DE-5000 Handheld LCR Meter

  • This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp)..
  • This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key..
  • Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz..
  • The "Sorting"mode could help the user to make a quick sort for a bunch of components..
  • Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included..
Check Stock

East Tester Desktop LCR Meter inductance Tester 10~100KHz Continuously Adjustable; 1Hz Step; Support SCPI; (4510, Grey, 3)

  • Lcr meter benchtop Testing frequency 100khz.
  • Capacitance meter capacitor tester Basic accuracy:0.1%.
  • Capacitance clamp meter Interfaces: standard: RS232.
  • Inductance meter tester Support dc resistance (DCR).
  • Inductance meter benchelectrolytic capacitor measurement model,Adjustment of backlight brightness, Chinese and English are optional.
Check Stock

Amprobe AMB-25 Digital Insulation Resistance Tester

  • Insulation resistance meter to test insulation of wires, cables, transformers, and electrical motors.
  • Digital meter with automatic range selection.
  • Internal memory stores up to 9 test results.
  • Measures insulation resistance from 0 to 1,000 megaohms with 250, 500, and 1,000V DC test voltage.
  • Safety rated to European Standard EN 61010-1 Category III 1,000V.
  • Tests insulation of wires, cables, transformers and electrical motors.
  • Selectable test voltages 250V, 500V and 1000V.
  • Programmable timer to perform the dielectric absorption ratio test.
  • Sensitive ohmmeter for checking resistance of motor windings.
Check Stock

LC200A Inductance Inductor Capacitance Capacitor L/C Multimeter Meter Tester

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

Amprobe AMB-45 Insulation Resistance Tester

  • Insulation resistance meter with built-in voltmeter to test insulation of wires, cables, transformers, and electrical motors.
  • Digital meter with automatic range selection.
  • Internal memory stores up to 4,000 test results for later download to a PC.
  • Measures voltage from 0 to 600V AC or DC and insulation resistance from 0 to 4,000 megaohms with 250, 500, and 1,000V DC test voltage.
  • Safety rated to European Standard EN 61010-1 Category III 600V and Category II 1,000V.
  • Internal memory to store measurements for future reference.
  • Insulation resistance with 250, 500 & 1000VDC test voltages: 0-4.000/40.00/400.0/4000MΩ ±3% Rdg ± 5 LSD 003c 2GΩ ±5% Rdg ± 5 LSD 003c4GΩ.
  • Low resistance: 0-400.0, 4000Ω 1% Rdg + 5 LSD.
Check Stock

CASIO REPLACEMENT STRAP FOR G-9300-1V

  • Shock resistant, neobrite, mineral glass, mud resistant, 200-meter water resistance, led backlight (super illuminator), digital compass, thermometer, world time, stopwatch.
  • Countdown timer, 5 daily alarms, hourly time signal, low battery alert, full auto-calendar, 12/24-hour format, button operation tone on/off, approx. Battery life: 2 years on sr927w x 2.
  • Water resistant 200m (660ft):in general, suitable for professional marine activity and serious surface water sports, but not diving.
Check Stock

Aokin Bowden PTFE Tubing, Premium PTFE Tube for 1.75mm Filament PLA ABS 3D Printer, 1 Meter

  • Size: Inside diameter 1.95mm 0.05mm, outside diameter 4mm, length 1 meter.
  • Material: durable PTFE material, safe and odor-free, smooth surface, non-stick & corrosion resistance..
  • Use: environmentally friendly and pollution free & durable, widely used in electronics, chemicals, medical and industrial..
  • High & low-temperature resistance: usable temperature -190/-374~ 260/ 500, almost unaffected by temperature..
  • Aokin 3D printer accessories use high quality raw materials and fine workmanship, If you have any question for our product, please feel free to contact us, we will do our best for you..
Check Stock

MESR-100 Capacitor Tester, Geevorks ESR Meter in Circuit Capacitor Tester Up to 0.001-100.0R, Auto-Ranging Ohm Meter

  • This MESR-100 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing..
  • Capacitance meter is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).The impedance become small, and we can then measure the true series resistor value..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test..
  • Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check..
  • Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.[Note: without SMD test clips].
Check Stock

uxcell Aluminum Foil Tape, 50mmx20m Self-Adhesive Waterproof High Temperature Sealing Tapes for HVAC Duct Pipe Insulation

  • [Specification] - Tape Width: 50mm/ 1.97 Inch.
  • Working Temperature: 95℃ to 120℃ (203℉ to 248℉).
  • [Material] - Made from aluminum and pressure-sensitive adhesive material, with good heat resistance, flame-retardant, and waterproof..
  • [for Multi Kind Surface] - Sticks to any type of surface, but need to make sure the surface is clean..
  • [Easy to use] - It is convenient to peel off the backing paper from the edge..
  • [Applications] - Widely used on sealing HVAC air ducts, hot or cold pipes insulation, and light-reflective projects..
Check Stock

uxcell Aluminum Foil Tape, 45mmx50m Self-adhesive Waterproof High Temperature Sealing Tapes for HVAC Duct Pipe Insulation

  • [Specification] - Tape Width: 45mm/ 1.77 Inch.
  • Working Temperature: 95℃ to 120℃ (203℉ to 248℉).
  • [Material] - Made from aluminum and pressure-sensitive adhesive material, with good heat resistance, flame-retardant, and waterproof..
  • [for Multi Kind Surface] - Sticks to any type of surface, but need to make sure the surface is clean..
  • [Easy to use] - It is convenient to peel off the backing paper from the edge..
  • [Applications] - Widely used on sealing HVAC air ducts, hot or cold pipes insulation, and light-reflective projects..
Check Stock