Reviews Surface Plate Gauge

Custom Bike Building Basics

  • Personalized State License Plate. Hand Crafted With Care In Florida. USA Made..
  • Made Of 100% Twenty Two Gauge Aluminum, This License Plate Is Coated With A High Gloss Finish, UV Fade Resistant..
  • High Temperature Heat Is Used To Transfer The Ink Directly Onto The Surface Of The License Plate..
  • This Custom Personalized License Plate Is Available In 3 Sizes. 6" X 12", 4" X 7", 3" X 6". Features Pre-Slotted Mounting Holes, No Drilling Required, Easily Mounted..
  • This Is A Novelty Replica State License Plate And Is Not Intended To Replace The Official State License Plate..
Check Stock

Tanstic 16Pcs Tire Tread Depth Gauge and Brake Lining Thickness Gauge Set, Come with Tire Pressure Gauge and Tire Valve Caps

  • ...ire Tread Depth Gauge] Tire tread depth gauge can be used to measure tire tread depth accurately, and the color coded design can clearly distinguish the different phase of tire. Suitable for trucks, automobiles, motorcycles or other vehicles. You just need to put the tire tread depth gauge perpendicular to the tire surface, and then press down until needle touches the tire, and finally look straight and read the data horizontally..
  • ☀[Tire Pressure Gauge] Tire pressure gauge can be used to measure tire pressure accurately and it is designed with 45 degree angle single head for easy operation. You just need to twist off the tire valve cap, press the mechanical tire gage chuck to the valve, then the scale plate will slip out and you can read the tire pressure from the scale plate..
  • ☀[Tire Valve Cap] 10pcs tire valve caps are included in the package, which can create a tighter seal and make sure that there's no air leaking on a long and tough drive..
Check Stock

Husky 10 Digital Level

  • Plumber's Kit straps to brass, copper, PVC, and other non-magnetic pipes and conduits to present a magnetic surface to which Digital Angle Gauges and Levels may be mounted.
  • Two flexible, adjustable length straps connect the metal plate to pipes, conduit, or other objects.
  • Fits common PVC pipe sizes from 1- to 6-Inch outer diameter and can stretch to fit circumferences up to 18-Inch.
  • Attach magnetic side of Digital Angle Gauges and Levels to the metal plate to use the gauge in a hands-free fashion to easily set and measure angles.
  • Metal plate holds Digital Angle Gauges and Levels in place while the desired angle, pitch, or tilt is set or measured.
Check Stock

Glarks 3 Pack Stainless Steel Welding Gauge Set, 25-3000um Wet Film Comb + Wire Metal Sheet Thickness Gauge + Round Dual-Sided Wire Cable Sheet Gage Standard Thickness Metal Gauge AWG and SAE

  • ... metal sheet thickness gauge, and a pack of dual-sided wire cable sheet gage total 3 pack. They are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the welding gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: Wet film comb range is 25-3000um. Dual-sided round wire gauge range is 0-36 American standard.
  • Wire metal sheet thickness welding gauge is 24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035")..
  • ★【Pratical Measuring Tools】: The interval division on the gauge is detailed and having high measuring precision. Sizes and numerals are etched on the surface for clarity and easier reading. Good to determine the thickness of the material before welding or working, permits a quick and accurate measuring of the most popular welding thickness..
  • ★【Wide Application】: They measure accurately and have almost no errors. Wet film comb typically used to measure the coating thickness of paint, varnish.
Check Stock

Black - Heavy Duty Motorcycle Anodized Aluminum License Plate Blank 0.05 / 1mm - Standard US/Canada Size 4 x 7 in (1)

  • Plate surface accepts vinyl lettering and graphics well.
  • Excellent screen printability. These blanks are thicker than the standard 0.25 Gauge plates you usually find..
Check Stock

Prokomon Motorcycle Carb Carburettor Synchronizer Vacuum Balancer Gauge 2/4 Cylinder Sync Gauges Kit

  • ◇ Makes synching your carburetor setup fast and easy.
  • ◇ Excellent quality vacuum gauges enable easy synchronisation and balancing of motorcycle carburettors.
  • ◇ Each unit includes a gauge mounted on a metal base for a work surface.
  • ◇ Kits includes: Vacuum Gauges, Hoses, Extensions, Adapters, Mounting Plate.
  • ◇ Important : If you find the needle does not point the zero position.Please don't worried. This gauge is precision.Please open cover by hand and use slot screwdriver to adjust it.It is easy.See the below picture.
Check Stock

75x25x36 AP30 Stainless Steel Angle Gauge Precision Micro Block Milling Adjustable Angle V Block Milling

  • 【PREMIUM STAINLESS STEEL】Our angle v block milling is made of high-quality stainless steel. This angle gauge has the advantages of surface hardening and durability.
  • 【NICKEL PLATED WORKING FACE】We carry out nickel plating treatment on the working surface of each degree angle plate angle, and the parallelism and perpendicularity of the rust removal of this adjustable angle v block are finely ground to 0.01mm.
  • 【FIXED ANGLE PROCESSING】This precision gauge can use the cursor to indicate the stepless tilt adjustment angle, and then fix it with screws to make various fixed angle processing and inspection workpieces.
  • 【ANGLE V BLOCK】The corner V-shaped block has the characteristics of high precision and easy operation. This micro v block milling can meet your various work needs.
  • 【WIDELY USED】This high precision angle gauge uses adjustable angle grinders and adjustable blades on milling machines, planers, and drilling machines. After the workpiece is processed, this stainless steel block milling crosses or clamps the workpiece with other fixtures, such as processing inclined planes, inclined hole drilling, etc.
Check Stock

TOCOLES Tire Gauge Pencil, 2Pcs Pencil Tire Pressure Gauge PSI (5-50) with Tire Tread Depth Gauge and 8Pcs Tire Valve Stem Caps

  • [VALUE PACK] - Come with 2 pieces tire pressure pen, 1 piece tire tread depth gauge and 8 pieces tire valve stem caps, 11 pieces in total, enough quantity for daily use and replacement.
  • [WELL MADE] - The tire pressure gauge pencil is made of stainless-steel metal and zinc alloy, anti-rust and anti-corrosion, sturdy and durable. The car tire gauge is designed with a heavy-duty head, prevent air leaks at the nozzle. The ABS scale plate features clear marks, accurate and reliable.
  • [EASY USE] - Twist off the valve cap, press the head of the car pressure gauge into the gas nozzle, then the scale plate will slip out and you can read the tire pressure from the scale plate. After use, twist on the valve cap and push the scale plate back. No battery needed.
  • [HUMANIZATION DESIGN] - The pencil type tire pressure checker adopts 45 degree angle single head for easy operation and strong seal. Pocket-size air tire pressure gauge is designed with pocket clip, portable and easy to store.
  • [WIDE APPLICATION] - Our tire air pressure gauge for tires has three indicator, namely PSI (5-50), KPA (50-350) and BAR (0.5-3.5), perfect for checking tire pressure of cars, trucks, vehicles, motorcycles, bicycles etc..
Check Stock

Pangea Audio LS300 All Steel Bookshelf Speaker Stands Pair (32 Inch)

  • Super-rigid all-steel construction speaker stand rigidly supports a wide range of bookshelf-, monitor- and rear channel-type loudspeakers.
  • Three large diameter steel support columns arranged in a triangular shape are coupled to steel top and bottom plates forming an incredibly rigid platform for enhanced speaker performance.
  • The 6” by 6” steel top plate matches a wide range of speakers.
  • the 10” by 12” heavy gauge steel base plate combined with four adjustable steel cone point spikes provide excellent stability and easy leveling on any surface.
  • One steel column has openings at the top and bottom to hide speaker cables and two columns can be sand- or shot-filled for even better vibration damping.
  • Available now in five heights – the 20” height comes with a 6” by 9” steel top plate for extra large speakers.
Check Stock

TINTON LIFE Set of 13 Non-Slip Washable Stair Treads Carpet with Skid Resistant Rubber Backing Indoor Wooden Step Mats Self-Adhesive Stair Protectors 10.2\ x 25.2\ Alexander Red

  • ...eight from 11.4 - 60.7 inch to match any work requirements. The 360° rotation jig plate is easy to measure Irregular stair treads..
  • Long Lifetime Stainless Stair Tread Tool : The jie plate is made of high-quality 304 stainless steel , the adjustable link in the middle is made of high-quality stainless steel and the surface is treated by Anodizing.The overall product is sturdy and durable and can be used lifetime. Copper & diamond-shaped nut made of bakelite,Easy to adjust the tightness.
  • Ergonomic Design - Lased 0-10 in tick mark , curved and 0°to 360° adjustable jie plate, easy to operateand adjust to stair tread template set width providing a perfect layout for stair treads, risers and shelving.
  • Packing Product List - 2*Jig plate with ruler, 14* Stainless Steel Screws , 12* Thumb Nuts , 6* Adjustable Metal Connecting Rods (16 inches * 2, 12 inches *2, 8 inches X2) , 1* free pensol,1* free bubble level.
Check Stock

UOKRR Precision Miter Gauge for Table Saw Craftsman Telescoping 20" to 36" Aluminum Miter Fence Repetitive Cut Flip Stop 60° Angled Ends for Maximum Stock Support

  • ...fit the guide rail for your table saw, the miter gauge fits standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot, and it can be installed on most table saws..
  • Tool Free Installation: The miter gauge is very easy to setup and locking by manually turning the knob, made of premium aluminum alloy with its surface treated by CNC-machined anodic oxidation, which has higher wear resistance, the surface has been deburred and smoothed, no need to worry about cutting your hands..
  • Our Service: We provide 2 years warranty for our miter gauge, free return or replacement within 30 days, please feel free to contact us if there will be any problems, we will give you a satisfying solution ASAP..
Check Stock

Plyisty Portable Ping Pong Net, Ping Pong Net Replacement, Durable for Home Competition Fun Entertainment

  • Easily convert existing tennis courts to pickleball courts with these easy-to-install surface mount posts. Posts offer the same long-lasting features as the classic Premier SQ posts..
  • POST AND BASE: The 3” square pickleball post is constructed from heavy-duty 11-gauge steel. Post is welded to a thick base plate to secure posts to the playing surface. Systems are finished with black baked-on polyester powder coat to resist rust and increase durability. Integrated welded steel lacing rods are included for a profession net installation..
  • HARDWARE: Internally wound featuring a self-locking gear mechanism. Gears are constructed of plated steel and the small gear is case hardened. Gear housings and caps are made of cast aluminum alloy. Gear function is 30:1 to ensure a smooth, easy operation. Flush mounted gear plate cover and removable handle are chrome plated..
Check Stock

Hooke Road Tundra Front Winch Bumper +Rear Bumper Compatible with Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 90 lbs)..
Check Stock