Reviews Supporting Gas Spring

Douper 100N/22lb Gas Spring Hinge Slow Down Drop Leaf of Cabinets Desks Slowly Open Drop Leaf Pack of 2

  • SPECIALLY DESIGNED FOR DROP LEAF--The hinge will work perfectly if your drop leaf weighs less than 22lbs. It is not used for supporting lid or keeping it stay..
  • STURDY GAS SPRING—Pressure: 100N/22lb. Suitable for: 16-22lb drop leaf. Made of solid brass and iron, sturdy gas spring helps to lower the lid softly and close it easily. With Chrome plated, it is durable and corrosion-resistant..
  • SOFT DROP-DOWN—It is designed to damper the drop-down rate of a drop leaf, such as that of cupboard, cabinet and shoebox, and prevent quick and dangerous closure..
  • EXTEND AUTOMATICALLY-- Overall length: 7.9in (compressed) to 11.4in (stretched). Travel-3.5in. The space-saving hinge will extend automatically as you pull the lid open, and will not get in the way..
  • EASY TO INSTALL by following the instructions.
Check Stock

Yo Mama Jokes, Gas Pump and Door Handle Extended [Explicit]

  • PACKAGE CONTENT: 2 Pieces Gas Spring with Brackets and Installation Screws..
  • MAXIMUM LOAD CAPACITY: 100N/22Lbs, MAXIMUM OPENING ANGLE: 90 - 100 Degree..
  • MATERIAL: Made for the shaft, durable and practical. COLOR: Metallic Gray..
  • MAIN FEATURES: Lids soft open gently, Ideal for supporting the lid to keep it open. Silence with cabinet doors close. Suitable for Cabinet, Doors, Box, Container and etc..
Check Stock

QAA is Compatible with 2003-2008 Toyota Corolla 1 Piece Stainless Gas Door Cover Trim, with Crease Contour GC24112

  • Compatibility:Fuel Door Spring Fit for Toyota Tundra 2013-2021 Gas Tank Door Spring.
  • Reference Part Numbers: 77305-0C060 77305-0C050 77291-0C070 77363-0C070.
  • The gas tank door of your tundra has been loosen becasue of the rust gas door spring. You can replace the broken spring instead of replacing the whole gas door tank housing.
  • Package:1 Pcs Toyota Tundra 2013-2021 Fuel Door Spring.
  • If you have any questions, please contact us, we will reply you within 24 hours..
Check Stock

2 Pack 10 inch Gas Prop Force 200N/44LB Gas Struts – Black Gas Springs/Window Lift and Lid Support/Gas Shocks for RV Bed Platform/Floor Hatch/Outdoor Bench/Cabinet/Tool Box/Truck Canopy/Camper Cover

  • ★Stable Support: Our gas spring has strong stability to support the lid or lift when needed, keep the chest open with the angle up to 100 degrees when in the open position.
  • ★Lids soft open gently, Ideal for supporting the lid to keep it open, NOT SOFT CLOSE.
  • ★Force: Gas prop force 200 N nominal value /44lbs per strut.
  • ★Length (From hole center to the other): 9-11/16 '', travel: 3-14/25 '', distance between ball mounts compressed.
  • ★If you have any questions, please leave us message, we'll answer and reply within 24 hours.
Check Stock

MOUNTUP Single Monitor Mount, Height Adjustable Gas Spring Monitor Arm Desk Mount for 17-32 Inch Computer Screens, Swivel Monitor Stand Holds 2.2-17.6 lbs, Fits VESA 75x75mm & 100x100mm MU0025

  • Wide Compatibility - This monitor desk mount fits most flat and curved computer monitors up to 32” with VESA 75x75mm or 100x100mm. Supporting the max weight of 17.6 lbs. Comes with clamp mount and grommet base mount for a variety of desktops up to 3.14" thick..
  • Gas Spring Height Adjustment - The build-in advanced gas spring system provides 9.4 inches of smooth height adjustment. And the monitor arm height also can be adjusted along the 14.2" pole. The single monitor mount can freely set up an ergonomic height to relieve neck, shoulder or back pain..
  • Fully Adjustable Monitor Arm - The single monitor arm has a wide range of articulation, rotation, and adjustability for setting a comfortable viewing angle. It allows your monitor to tilt 90°up and 45°down, swivel 90°left and right, rotate 360° for landscape or portrait..
  • Sturdy Construction - Heavy duty computer monitor stand is made from aluminum and steel for a sturdy reliable use. It's strong enough to ensure the safety and security of your computer screen..
  • Easy Installation - We offer all necessary mounting hardware for easy assembly. Our friendly customer support team is available to answer any questions within 12 hours. All MOUNTUP monitor mounts are backed by 3-year support!.
Check Stock

Whitecap Industries G-3460SSC Stainless Steel Gas Spring - 12\ to 20\

  • 【Material】 - M8 thread is made of PA66A5,simple design, good quality, durable..
  • 【Feature】 - Gas spring strut joint connector end fitting..
  • 【Advantage】 - Gas spring end fitting connector can be used over and over again,easy removal..
  • 【Application】 - Gas spring end fitting connector is a good replacement of gas springs ball strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check Stock

11Inch Gas Spring Prop Strut Shock Lift Support for RV Door Motorhome Door Compartment Door Cargo Door and other DIY Applications 500N

  • 【Premium Quality Making Material】 -This rv compartment door hydraulic hydraulic gas spring is made of precision steel pipe, which is flexible and....
  • 【Long Serving Life and Sturdy】 -This gas strut hood lift is strong and not easy to break, good performance in durability,a good replacement for....
  • 【Convenient To Install】 -Open the lid or door to the position you want.Take about 20% of the lid length as the upper installation point.
  • 【Detailed Specification】 -This gas spring Type: Gas Spring Center Distance: Approx. 280mm / 11in Stroke: Approx. 100mm / 3.9in Pressure: 100N,....
  • 【Wide Of Applicated】 -This gas spring is suitable for equipment flip lid, snack car flip door, advertising bar, light box, flip window and hood....
Check Stock

2 Pieces Berta 10 Inch 100N/22LB Hydraulic Soft Open Gas Springs/Struts for Cabinets Furniture Cabinet Doors Lift/Lid Stay/Support Hinges for RV Platforms with Brackets and Screws

  • PACKAGE CONTENT: 2 Pieces Gas Spring with Brackets and Installation Screws..
  • MAXIMUM LOAD CAPACITY: 100N/22Lbs, MAXIMUM OPENING ANGLE: 90 - 100 Degree..
  • MATERIAL: Made for the shaft, durable and practical. COLOR: Metallic Gray..
  • MAIN FEATURES: Lids soft open gently, Ideal for supporting the lid to keep it open. Silence with cabinet doors close. Suitable for Cabinet, Doors,....
Check Stock

Berta (1 Pieces) 100N/22LB Hydraulic Soft Open Gas Springs, Gas Strut for Cabinets, Cabinet Doors Lift Support, Gas Shocks, Lid Stay, Lid Support with Brackets and Installation Screws

  • PACKAGE CONTENT: 1 Pieces Gas Spring with Brackets and Installation Screws..
  • MAXIMUM LOAD CAPACITY: 100N/22Lbs, MAXIMUM OPENING ANGLE: 90 – 100 Degree..
  • MATERIAL: Made for the shaft, durable and practical. COLOR: Metallic Gray..
  • MAIN FEATURES: Lids soft open gently, Ideal for supporting the lid to keep it open. Silence with cabinet doors close. Suitable for Cabinet, Doors, Box, Container and etc..
Check Stock

SUSPA C16-04270 Gas Spring (set of 2)

  • Package Content: 5Pcs x Gas Spring End Fitting.
  • Gas Spring Strut Joint connector End Fitting..
  • It is a good replacement of gas springs Ball Strut, and the gas springs are motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check Stock

Gas Struts,Gas Springs,Lift Support,Gas Shocks,Lid Stay,Lid Support,Gas Strut Lid Stay Support Kitchen Cabinet Door Hinge,Soft Close Lid Hinge,Gas Shocks,Toy Box Hinges,150N/33lb/15KG[2 Pack]

  • ...t is recommended: one for cabinet door width 600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door..
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc..
  • ★ Pressure:150N / 33lb / 15KG (Per Strut).
  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″. Please select the correct model strictly according to the data sheet of the detailed picture. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door..
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction an....
Check Stock

C16-20651 C16-33313 18.7 inch 40 lbs Gas Strut Shocks Lift for A.R.E Leer Camper Shell Pickup Truck Cap Topper Canopy Glass Door Hatch Back Window Bed Cover, 18.7" Gas Spring by PAMAGOO 2 Pack

  • ⌈18.7 inch Gas Strut⌋Extended length: 18.70 Inch, Compressed length: 10.82 Inch. 40 Lb / 178 N per strut, 2 PACK. Package information: 18.70 inch 40 lbs gas prop strut X 2.
  • ⌈18.7 inch Gas Shock⌋Lift-o-mat spring strut lift for A.R.E Leer camper shell, pickup truck cap topper, canopy glass door hatch, back window, bed cover, replacement shocks, etc..
  • ⌈18.7 inch Gas Spring⌋Interchange Part number: C1620651, C16-20651, C16-33313, C1633313, SE187P40, SE187P40S10..
  • ⌈Leer Camper Shell Gas Shock⌋If the weight and the pressure of the gas strut do not match, the gas strut may not work properly, please select the appropriate gas strut according to the original part number and pressure value. NOTE: The gas struts can not be compressed by hands before installation!!!.
  • ⌈Canopy Truck Gas Strut⌋180,000 times -passed TUV fatigue test. Pamagoo choose special low-temperature-resistant materials, WORKING TEMPERATURE: -40℃~60 ℃/-40℉~140℉. PAMAGOO will provide you with professional customer service BOTH before and after your purchase and offer 18-MONTHS support service. We have gas spring installation videos and online service to guide quick installation in minutes. After successful installation, the Door/Window can be lifted easily..
Check Stock

C16-06389 108N/24Lbs 14 Inch Gas Struts Shocks Springs Lift Support for Camper Shell Truck Topper Rear Window Tool Box Lid 2pcs by IAQWE

  • [GAS SPRING PARAMETER]: Force: 24Lbs/108N 14 Inch per Strut, a pair of 2 shocks. Extended Length: 14”, Compressed Length: 8.8”. Very Strong! Can not compress directly by your hands..
  • [14 INCH GAS SHOCKS]: Exchange number: C16-06389, C1606389. Package include Struts* 2, Installation Guide* 1. A variety of colors are available for you to choose..
  • [24LBs GAS STRUTS]: Suitable for Camper Shell Window, Trunk Topper Window, Tool Box, Toy Chest Box Lid and so on. Scope of application: 18-26lbs. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations!.
  • [PREMIUM 14 INCH GAS STRUTS]: Our products are suitable for various harsh weather environments such as outdoor heavy rain and minus 104℉. As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support..
  • [GAS SPRING SUPPORT]: 36 Months Replacement Support. Any issues, just mail us via Amazon, and we will solve for you within 24HRS..
Check Stock