Reviews Support Sata

StarTech.com M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R)

  • HIGH PERFORMANCE: Create a high-performance storage solution by installing up to two M.2 SATA SSDs into a 2.5" SATA adapter with RAID support for JBOD, SPAN, RAID 0, and RAID 1.
  • HASSLE-FREE SETUP: Open-frame steel mounting bracket with 2.5" SATA form factor fits in any 2.5" SATA bay that supports 7mm tall 2.5" drives. Easy to install with all necessary hardware incl. (M.2 drives and screwdriver not incl.).
  • WIDE COMPATIBILITY: Supports B & B+M key SATA M.2 SSDs in 2230/2242/2260/2280 form factors. Supports SATA I, II, and III (up to 6 Gbps) TRIM, and SMART. M & B+M key NVMe or AHCI PCI-e M.2 SSDs not supported (only SATA supported)..
  • TRIM SUPPORT: TRIM support enhances the stability and performance of your M.2 SSDs plus it provides SMART support. TRIM supported in JBOD and RAID 1, SMART only supported in JBOD..
  • NOTE: Before purchasing this product or your M.2, please confirm if it is a SATA type, via manufacturer specifications/support.
  • if you intend to use JBOD (don't intend to use RAID) then make sure that your SATA port/controller supports Port Multiplier..
Check Stock

Padarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD

  • 【SATA III 1 to 5】SATA3.0 1 to 5 expansion card supports 6-port 6.0Gbps SATA III interface. This expansion card requires the motherboard or expansion card support point (SATA Interface Multiplier) to recognize 5 hard drives. Normal motherboard SATA does not support this function. If not, only one hard disk can be recognized..
  • 【High Performance】SATA III PHY output swing control and automatic impedance calibration. Plug in the SATA or DC2.5 power cord to charge the expansion card. Plug the SATA input cable into the motherboard or expansion card to charge the SATA..
  • 【Meet The Specification】The SATA3.0 expansion card complies with the Serial ATA Port Multiplier specification, the serial ATA port selector specification, the ATA PHY series electrical specification revision 1.0, and the accessory specification ATA series high-speed serialization..
  • 【Support Function】SATA3.0 card supports spread spectrum clock, asynchronous signal recovery, partial/sleep power saving mode, BIST and Loopback mode, interleaved rotation (optional), supports hot swap, asynchronous notification, ATAP driver, SWIT based on order and Fi..
  • 【100% Guarantee】If you have any questions about our products while using them, please feel free to contact our 24/7 customer servic....
Check Stock

FIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)

  • 【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
  • 【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
  • 【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
  • 【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
  • 【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....
Check Stock

Intel Integrated RAID Module Storage Controller RMS25KB040

  • This RAID controller has four internal SAS/SATA ports and uses a x8 or wider PCI Express* server board slot.1.2 Operating System Support Supports SAS/SATA devices at speeds up to 300 MB/second per port Supports the SATA II protocol over SAS transp.
  • Contains four internal SAS/SATA ports Supports up to 8 SAS/SATA II devices via expanders Supports up to 64 virtual disks Supports up to 8 arrays Supports RAID levels 0, 1, 5, 6, 10, 50, and 60 Hardware exclusive OR (XOR) assistance.
  • Online capacity expansion Online RAID level migration Physical drive roaming RAID controller migration Fast virtual drive initialization Hot-spare drive configuration, both private and global.
  • SATA drive hot-plug Staggered spin-up Native command queuing Support for SMART* Auto rebuild Variable data stripe size configured per virtual drive.
  • 128 MB of ECC DDR2 667 MHz SDRAM integrated on the controller Read and write cache policy SES2 intelligent enclosure support PCI hot-plug support Background media test (patrol read) Background data integrity test.
Check Stock

Pcie Sata Expansion Card 10 Port , Sata Pci Express Serial Adapter Card 10 Port 6 Gbps with 10 SATA Cables for Filcoin Mining Rig and Adding SATA 3.0 Devices

  • 【Sata Expansion Card】：If you want a simple and small solution to expand your sata storage by 10x then this is the way to go. Fits nicely between two pcie cards with all 10 sata slots plugged and working..
  • 【Pcie To Sata】：Chip:ASM 1166 Supports SATA 3.0, backward compatible with SATA 2.0 and SATA 1.0.Equipped with 10 SATA 3.0 ports, compliant with Serial ATA 2.0 specification, transfer rate up to 6Gdbs, support SATA interface for high-capacity HDD/SSD/optical drive.
  • 【Easy to use】:Works strait out of the box no Drivers needed..
  • 【System Support】:Support Windows 10 / 8 / 7 / Vista / XP (32/64-bit) and more operating system..
  • 【Service】:We have professional R&D team, will continue to launch new products to meet customer needs and thank you for your supporting.If you have any questions, please feel free to contact us..
Check Stock

DiLinKer OCuLink SFF-8611 to PCIE SFF-8639 U.2 NVMe with Power Cable 1M

  • Create high-performance storage with configurable RAID by installing two M.2 SATA SSDs into a 2.5 SATA interface.
  • Dual-Slot M.2 to SATA Adapter supports multiple RAID modes: RAID 0 / RAID 1 or spanning or JBOD.
  • Supports B key M.2 SATA SSDs including full-length M.2 SSD drives (2230 / 2242 / 2260 / 2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs).
  • TRIM support to enhance the stability and performance of your M.2 SSDs plus provides SMART support.
  • M.2 Adapter / M.2 SSD Adapter / M.2 SATA Adapter / Dual M.2 to SATA Adapter / M.2 Drive to SATA Adapter / Dual SSD Adapter / M.2 SATA SSD / m 2....
Check Stock

StarTech.com 4 Bay USB 3.0 (5 Gbps) Hard Drive Docking Station w/UASP for 2.5" & 3.5" SATA SSD HDD - Multiple External Hard Drive Cloner/Copier Dock (SDOCK4U33)

  • Support SATA III (6 Gbps) and UASP for optimal performance.
  • Compatible with USB enabled computer systems such as Dell Optiplex & Apple Mac & MacBook and SATA 2.5in/3.5in hard drives.
  • RELIABLE SUPPORT: Backed by a StarTech.com 2-year warranty, this 4 bay SATA hard drive docking station has free lifetime technical support.
  • Dock and Swap Hard Drives directly to your computer system without mounting.
  • Connect and swap four 2.5/3.5” SATA drives or SSD through USB 3.0.
  • DUAL FANS: Keep your drives running cool and help prevent premature drive failure with the built-in dual 40 mm fans on this multiple hard drive copier.
  • INDEPENDENTLY POWERED SATA CONTROLLERS: You will experience a hassle-free operation with this hard drive duplicator dock. It features independent SATA controllers allowing for uninterrupted data transfers while hot-swapping the other drives.
  • MULTIPLE HARD DRIVE DUPLICATOR DOCK: Connect and swap four 2.5 / 3.5” SATA HDD/SSD drives simultaneously through a single USB port with this 4 bay external hard drive cloner.
  • Hard Drive Dock / Four Bay Dock / Hard Drive Docking Station / SATA Dock / Hard Drive Docking Station with UASP / SATA HDD Docking Station / Hot Swap Hard Drive Dock.
  • EXPERIENCE HIGH PERFORMANCE: This USB 3.0 to SATA hard d....
Check Stock

ASRock Intel H310 Chip with Micro ATX Motherboard H310 cm – Hdv/M. 2, H310CM-HDV/M.2

  • Gigabit Ethernet high quality 6 channel sound card, high speed and stable transmission. Support front and rear dual USB 3.0 ports, support SATA3.0 hard disk transfer rate..
  • B75 M.2 motherboard supports M.2 high‑speed hard disk interface, round keyboard (PS 2 port)..
  • High definition high performance core display graphics card, support VGA+HDMI+DVI dual output High compatibility brings a higher experience..
  • Support NVME+NGFF dual mode hard disk switching PCIE high speed channel + SATA2.0 channel free choice..
  • M.2 high speed hard disk interface, maximum memory support 8G×2, 1155 pin CPU interface USB3.0 SATA3 support DDR3..
Check Stock

Qphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166

  • [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
  • [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
  • [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
  • [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
  • [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check Stock

Mailiya PCIe SATA Card with 4 SATA Cables, 4 Ports SATA 3.0 6Gbps Controller Expansion Card, Low Profile Bracket and Heatsink, Non-Raid, Support 4 SATA 3.0 Devices

  • With 4 Ports SATA card, you can add 4 SATA III 6 Gbps devices to your computer, and the equipped 4 cables simplifies the connection..
  • PCIe SATA III card based on ASMedia ASM1064 chip, more stable and wider compatible. you could make the system to boot from this SATA Card but non Raid, no raid keeps your data more safety..
  • Support interface: PCIe x1 slots, support PCI-e X4/ X8/ X16 at the same time. Compatible with Serial ATA(SATA) Revision 3.0 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backwards compatible with SATA 1.0 and SATA 2.0..
  • Equipped with low profile bracket can also works for mini PC, and special made heatsink will keep your device under good performance and full-load operation..
  • The SATA expansion card works for Windows OS/MAC/NAS/Ubuntu, perfect for gaming pc and IPFS Mining Rig. Plug and play, no driver needed..
Check Stock

ASM1166 PCIe X1 SATA Card 6 Ports, Non Raid, Joylifeboard PCIE SATA III Controller Expansion Card 6 Gbps, Support 6 SATA 3.0 Devices, PCIe SATA Card with 6 SATA Cables+Thin Bracket

  • ...stable solution to expand your sata storage by 6x, compliant with SATA 3 max speed 6Gbps, SATA 2 (3Gbps), SATA 1 (1.5Gbps)..
  • ✿【Wide Compatibility】: This 6 Port PCIE 1X SATA card works on PCIe X1/X4/X8/X16 card slots, improve the stability and compatibility of the card.The SATA Card with 2 size profile brackets supports WinXP/7/8/10, Linux,MacOS ,Ubuntu,Synology,NAS,etc, perfect for IPFS mining rig..
  • ✿【Easy to Install】: Support ACHI 1.0 mode, If the PCs SSD/HDD in AHCI boot up mode, you can insert the hard drive into this sata card directly. No need driver, plug and play. This 6-port PCIe SATA III Controller Card is non raid, data can be protected by OS..
  • ✿【High Performance】: Super heatsink is long-lasting high temperature resistance. 3 solid capacitors can improve the stability of the supply. Support switch based on porter FIS or switch based on command.Chip: ASMedia+ASM1166.
  • ✅【Warm Service】: 6 Indicator LEDs for each SATA channel show which HDD is active and working properly. We are committed to providing high-quality product quality and sales services. Any problem please feel free to contact us, we will definitely reply within 18 hours..
Check Stock

AsRock Rack ATX Server Motherboard LGA 1151 Intel C246 Model C246 WS

  • Support Intel Xeon E-2100 Series Processors.
  • Support 4 x DDR4 DIMM slots, Dual channel DDR4 2133 / 2666 / 2400 ECC and non-ECC U DIMM max 64 GB.
  • Support 8 x SATA3 (included 1 x SATA DOM) + 4 x SATA3 by Marvell 9172.
  • Support 2 x PCIe 3.0 x16 + 1 x PCIe 3.0 x8 + 1 x PCIe 3.0 x1 + 1 xPCI + 3 x M.2.
  • Support 2 x RJ45 GLAN by Intel i210 + Intel i219LM.
Check Stock

Delkin 128GB Power CF Express Type B Memory Cards - 1730MB's Read/1440MB's Write, 2 Pack

  • Multifunctional: USB3.0 interface, SATA interface, large 4PIN IDE power socket or DC12V power supply socket, card reader, etc. are extended through the optical drive position or floppy drive position of the computer case..
  • With NGFF M.2 MSATA: Multi-Function USB 3.0 Hub CF TF M2 SD MS Card Reader Fan Controller equipped with SATA NGFF M.2/Msata SSD, supports M.2 SSD with SATA M.2 B key NGFF specification and mini SATA SSD..
  • OTB One Click Backup: OTB one click backup, can easily and quickly transfer files from PC to hard drive..
  • Internal and External SATA: The external SATA provides power and data transmission, and the SSD/HDD hard disk switch controls the internal SATA hard disk to turn on and off..
  • Support System: Internal Memory Card Readers Support for WinXP, for Vista, for Win7, for Win8, for Win10, for Linux, for OS X, etc..
Check Stock