Reviews Submerged Welding Wire

QWORK 260/300/500A Ground Welding Earth Clamp, Brass A-shape Welding Ground Clamp Cable Copper Grip for Welding Machine ( 260A )

  • Brass: QWORK Ground Welding Earth Clamp is made of high-quality brass, excellent conductivity, oxidation resistance and long service life..
  • Wear-resistant: The A-type clip is not easy to fall off, it is safe and reliable to use, electroplated, and wear-resistant..
  • Various types of welding: Suitable for argon arc welding, submerged arc welding, resistance welding, stud welding and other welding equipment..
  • Easy to operate: Simple structure, convenient operation, stable performance, high reliability, it is a perfect substitute for manual welding machine..
  • Wide range of uses: Widely used in shipyards, machinery manufacturing, petroleum exploration, automobile manufacturing and other industries..
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • The application of IGBT technology has significantly enhanced the welding machines reliability and turned them into a lighter and compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
  • MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
  • WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs gr....
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

.030 Flux Core Welding Wire SONNLER Mig Welding Wire 2Lbs Low Splatter Mild Steel E71T-GS Wire Compatible With HF Fourney Harbor Welder 3 PACK

  • GOOD VALUE FLUX CORE WELDING WIRE SET: This bundle includes 3 PACK flux core welding wires, each pack of welding wire is individually vacuum packed..
  • MAKE WELDING FAST AND EASY: SONNLER welding wire is made of Premium quality AWS E71T-GS mild steel, which helps you easily finish the welding project. Suitable for Great for T-joints, butt welds & lap welds..
  • PROFESSIONAL PACKAGING: Each 2-Pound Spool of SONNLER welding wire is individually vacuum packed, waterproof and moisture-proof, which ensures that the welder receives the best effect of MIG weld wire..
  • EXCELLENT & STABLE PERFORMANCE: When using Sonnler 0.030" flux core welding wire, had great slag coverage great performance on clean metal, and minimal spatter, with almost no cleanup or slag removal. Optimize your welding work. It is absolutely good value for the money..
  • WIDE APPLICATIONS: The gasless flux cored wire is specially designed for MIG welding machines. It is compatible with HF welder Forney welder Lincoln welder. Also suitable for professional welders and beginner welders. TOPSUNCOJIAS.
Check Stock

Keadic 10 Inch Scratch Wire Brush Slag Removal Tools, including 10 Inch Welding Chipping Hammer with Coil Spring Handle, Wire Brush & Welding Gloves/Fireplaces Golves

  • ✅【GREAT CRAFTMANSHIP & QUALITY MATERIAL】Scratch wire brush slag remover is made of high quality steel wire, compact bristles. Welding chipping hammer Carbon steel, heat treatment, high hardness and toughness and is with spring loaded with black. The welding pliers is with ergonomic grip, easy to operate. These two gauges work well for checking metal sheet wire size before welding or working. Easy to use and carry..
  • ✅【ALL IN ONE PACK】You are going to receive 1 piece of welding hammer, 1 piece of welding pliers, and 1 piece of wire brush 1 piece metal sheet thickness gauge, 1 piece round dual sided wire gauge and this pack comes with protective gloves, please wear this before operation! These tools will surely help a lot for your welding job. Easy to remove and clean corrosion and slag and rust, saving time and energy during your work, very easy to use, long-lasting and quick cleaning..
  • ✅【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not e....
Check Stock

AZZUNO 200A MIG Welder,110V/220V Dual Voltage multiprocess welder,Gas Gasless MIG Welding Machine,4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick ARC Welder (Grey)

  • 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose..
  • Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it..
  • Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 4.5mm..
  • Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 0.5MM-3MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E7018, E6013..
  • Powerful And Safe Machine:This 200A Welding machine can weld mild up to 4.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe..
Check Stock

ARKSEN MIG-130 Welding Machine Gas Less Flux Core Wire DIY Home Welder Automatic Feeding Yellow

  • Household smart welder: our ARKSEN welding machine is compact and exquisite MIG Gas welder, made of heavy duty stainless steel body, painted with....
  • Flux-cored wire-no Gas welder: our ARKSEN welding machine uses convenient flux-cored wire, self release metal-inert Gas while welding, prevent....
  • Adjustable welding speed: Our ARKSEN welding machine features a wire feeding speed adjust rotary knob. 10 levels of wire feeding speeds for your....
  • Portable design & wide applications: Our ARKSEN welding machine is perfect for welding normal thin steel and iron, perfect for home DIY and general....
  • Many complimentary necessities: The ARKSEN welding machine comes with two air-vent on the machine to help heat dissipation. The welding gun with full....
Check Stock

Fox Alloy E71T-GS .030\ Flux Core Welding Wire Gasless Mig Wire - 2 Lbs Spool Welding Wire Mild Steel Filler Metal (0.8 mm)

  • 2-lb spool 0.030" gas-less E71T flux-cored ( FCW ) mild steel MIG welding wire with sturdy packaging, and comes with a 0.030'' contact tip.
  • Welding Wire E71T-GS conforms to AWS A5.20 (E71T-GS), AWS A5.36 (E71T14S-AZ-CS3), ISO 17632-A (T42 Z Z V N 1).
  • Flux core welding wire E71T-GS is self shield, no shielding gas needed, single-pass fillet and lap welding, all positional, low welding fume, minimum spatter,Smooth arc action,High feedability,Filler Metal welding wire is easy to weld in indoor and outdoor.
  • Mild steel welding wire E71T-GS is applied in welding of thin plate steel structure, i.e, doors， fence..
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Flux Core Welding Wire ARCCAPTAIN E71T-GS .030 2-Pound Spool Gasless Carbon Steel Mig Welding Wire

  • Welding Easy and Quick: AWS E71T-GS 030” Flux Core welding wire (The actual Net Weight of Wire is 2LB), no need for shielding gas, install it then you can welding all positions, single and multi pass welding. Great for T-joints, butt welds & lap welds..
  • Great Welding Performance: Smooth arc action and High feedability, you will love the less splatter when do your welding project. The flux filling acts as a shielding agent to create beautiful and clean welds. Perfect for Professional welder, metalworking hobbyist, or DIY enthusiast..
  • Self shielded gasless mig welding wire works well on rusty, dirty and painted Material, also strong resistant to base material oil pollution, perfect for use outdoors, high-altitude, and other different environments..
  • Professional Packing: Flux core welding wire is vacuum packed for waterproof, moistureproof, dustproof, then ensure optimum welding performance and effect..
  • Trusted Quality and Service: The mig welder wire was passed TÜV TEST, which made of the finest quality materials and using state of the art technology from a twenty year factory offering in the welding MIG accessories that conform to the high standards..
Check Stock

Swpeet 4Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves,10 Inch Welding Chipping Hammer with Steel Coil Spring Handle for Cleaning Removing Slag

  • ☛ 1, What You Get ------ In this kit, You will get 4Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 pair Welding Gloves, In total 4Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb t....
Check Stock

Klutch 2-Tier Welding Cart with Locking Cabinet - 31 1/2in.L x 16 1/8in.W x 28in.H

  • POWERFUL 6-IN-1 MIG WELDER: The multi-process welding machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire, .035”/.045” aluminum wire..
  • SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds..
  • MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, it’s more convenient to start the next welding job..
  • REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier an....
Check Stock

Welding hammer/Slag hammer/Chipping hammer/welder hammer economic chisels, forged steel structures and shock-absorbing handles

  • 【GREAT CRAFTMANSHIP & QUALITY MATERIAL】Scratch wire brush slag remover is made of high quality steel wire, compact bristles. Welding chipping hammer Carbon steel, heat treatment, high hardness and toughness and is with spring loaded with black. Practical slag removal tool we offer..
  • 【ALL IN ONE PACK】You are going to receive 1 piece of welding hammer and 1 piece of wire brush and this pack comes with protective gloves, please wear this before operation! These tools will surely help a lot for your welding job. Easy to remove and clean corrosion and slag and rust, saving time and energy during your work, very easy to use, long-lasting and quick cleaning.
  • 【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not easy to deformation, bristles are neat and not easily deformed. It is very durable for a long term use..
  • 【WELDING CHIPPING HAMMER】Professional welding tool! Shockproof tool! Made of carbon steel, heat treatment, high hardness and toughness, it....
Check Stock

100Pcs Aluminum Welding Rods,400℃/752℉ 1.6MM*13INCH Low Temperature Solution Welding Flux-Cored Rodst,Aluminum Brazing Rods,Suitable for Aluminum Metal Welding and Repair of Aluminum Radiator

  • Low-temperature welding: The low-temperature flux core welding wire can be used for welding at temperatures as low as 400℃/752F, reducing the risk of damage to the welded material due to high temperatures..
  • NO SOLDER POWDER NEEDED: This welding wire does not require any solder powder, which makes it a convenient and easy-to-use option.
  • High strength: The use of high-quality aluminum alloys in the welding rod ensures that the welds are strong and durable. it is resistant to rust and corrosion, ensuring that your weld will last for years to come..
  • Only for Welding Aluminum - 100Pcs(19.7"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Easy To Use: Flux Core Welding Wire Is Easy to Use, Making It Ideal for Both Beginners And Professionals Alike. Its Simple Design Means That You Can Get Started With Welding In No Time..
Check Stock