Reviews Strut Bar

16’ Wide Horizontal Garage Door Reinforcement U-Bar Strut Support Brace

  • One - 3 Piece 16’ Wide Horizontal Garage Door Reinforcement U-Bar Strut Support Brace, and Hardware. Stronger Than A One Piece Strut Right Where it Counts! Starting to Bow? Fix Garage Door Bow. Save Your Door And Extend Its Life!.
  • The strut is a three piece strut, and once quickly bolted together it will run the length of your 16’ door. A strut is also known as a u-bar or a brace. As your garage door opener opens it pulls on the middle of the door. Thus creating stress to the door with the risk of creasing the section and the collapse of the section..
  • This strut brace will help reinforce your garage door. Different model garage doors have different outside center stiles. The pre-existing outside center stile holes in the strut may or may not line up with your door’s stiles..
  • Not to worry this is common and not a problem. The included self tappers will drill holes in the strut to attach it to your stiles no matter their placement..
  • Included is 2 - 8 foot door strut support braces, 1 Strut Support Brace Coupler, Assembly Hardware, and Mounting Hardware. Because it’s ship....
Check Stock

Detroit Axle - Front and Rear Strut w/Coil Spring Assembly Sway Bar Links Replacement for 2007-2011 Toyota Camry - 8pc Set

  • Kit Includes: (2) Front Strut & Coil Spring Assembly, (2) Rear Strut & Coil Spring Assembly, (2) Front Sway Bar Links and (2) Rear Sway Bar Links.
  • Complete Strut Assembly - Equipped with Strut, Coil, Spring & Mounts - Ready to Install.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
Check Stock

Detroit Axle - Front Strut Assembly + Rear Shock Absorbers + Sway Bar Links Replacement for Mazda 3 5 [Exc. Mazdaspeed] - 8pc Set

  • Replacement For - 2004-2009 Mazda 3 (Excluding MazdaSpeed) - [2006-2010 Mazda 5].
  • Kit Includes: (2) Front Complete Quick Strut & Spring Assembly, (2) Rear Shock Absorbers, (2) Front Sway Bar Links and (2) Rear Sway Bar Links.
  • Complete Strut Assembly - Equipped with Strut, Coil, Spring & Mounts - Ready to Install.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
Check Stock

Competition Engineering 3121 8-Point Hoop Roll Cage

  • Requires Comp Engineering Roll Bar Strut Kit 247-3000 for a complete 8-Point Roll Bar Kit For a complete 8-Point Roll Bar setup, this Roll Bar Hoop must be used with Competition Engineering 247-3000 Universal Mild Steel Strut Kit for 8-Point Roll Bars..
Check Stock

Readylift 67-5443 TRD Pro Skid Plate Adapter Kit

  • Max Lift: 4.0"F-2.0"R - Max Tire Size: 35".
  • Not for use on 2015 Tundra TRD Pro w/ Bilstein shocks.
  • Precison crafted upper strut extensions designed to position the strut in the same mounting angle position..
  • Kit includes differential drop brackets which lowers the differential on 4WD models. This keeps the near factory CV angle specifications that Toyota built into these great trucks..
  • New powdercoated sway bar frame mount spacers to keep your sway bar working properly..
Check Stock

Readylift 69-3490 2019 Silverado/Sierra 1500 4 Inch SST Lift Kit

  • Max Lift: 3.0"F/1.0"R - Max Tire Dia: 35".
  • E-coated finish on the strut extensions, rear blocks and U-bolts will last as long as your Toyota.
  • Skid Plate Spacers provided to adjust the skid plate down when using differential drop brackets.
  • Precision crafted upper strut extensions designed to position the strut in the same mounting angle position.
Check Stock

Detroit Axle - Pair 2 Front Quick Ready Struts and Coil Springs + 2 Front Stabilizer Sway Bar Links Replacement for 2007-2010 Sebring 2.4L FWD Sedan - [2008-2014 Dodge Avenger 2.4L FWD Sedan]

  • Replacement for 2008-2014 Dodge Avenger (2.4L FWD Sedan) - [2007-2010 Chrysler Sebring (2.4L FWD Sedan)].
  • Kit Includes: (2) Front Ready Strut Assembly and (2) Front Sway Bar Links.
  • Complete Strut Assembly - Equipped with Strut, Coil, Spring & Mounts - Ready to Install.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
Check Stock

ReadyLift 69-5475 4.0'' SST Lift Kit Toyota Tundra Front with 2'' Rear with Upper Control Arms without Shocks

  • Max Lift: 4.0"F-2.0"R - Max Tire Size: 35".
  • Not for use on 2015 Tundra TRD Pro w/ Bilstein shocks.
  • Precison crafted upper strut extensions designed to position the strut in the same mounting angle position..
  • Kit includes differential drop brackets which lowers the differential on 4WD models. This keeps the near factory CV angle specifications that Toyota built into these great trucks..
  • New powdercoated sway bar frame mount spacers to keep your sway bar working properly..
Check Stock

Competition Engineering C3310 10-Point Roll Cage Strut Kit Only (Main Hoop Kit Sold Separately)

  • Strut Kit Only for 10 Point Roll Bar Main Hoops. Meets NHRA requirements for cars running 10.99 or quicker with modified firewalls and/or floorboards. Increases chassis rigidity for better reaction times.
  • This Strut Kit consists of two door bars, two rear struts, six 6" x 6" x 1/8" steel mounting pads and twelve weld joint gussets. Manufactured from 1-5/8" x .134" wall mild steel tubing and all bends are mandrel formed on CNC equipment.
  • Tube ends are notched for better fit and easier installation. Meets NHRA and IHRA requirements.
  • Strut Kit comes complete with instructions to ensure a hassle-free installation. Welding is required..
Check Stock

ReadyLift 69-5175 3"F / 1"R SST Lift Kit - Toyota Tundra TRD / SR5 / Rock Warrior

  • Tundra Max Lift: 3.0"F/2.0"R - Max Tire Dia: 35".
  • Skid Plate Spacers provided to adjust the skid plate down when using differential drop brackets.
  • Precision crafted upper strut extensions designed to position the strut in the same mounting angle position.
Check Stock

HuiDao 1 Pair Hydraulic Gas Strut Lift Support Door Cabinet Hinge Spring Soft Close Hinge Lid Support Buffer Telescopic Rod for Furniture Cabinet Cupboard Door, 100N/22.5lb (Downturn Door 2)

  • ☺Durable to Use - Sturdy metal and ABS material with satin silver finish, strengthening its anti-corrosion performance and supporting capacity..
  • ☺Hydraulic Gas Strut - Adopts hydraulic system for easy operation, full-stage damper and good sealing without oil leakage..
  • ☺Down-Turned Style - The default state of the support bar is closed, and it is easy to pull it out manually, just a little effort. The installation effect of the down support bar is to let the door open slowly. Ideal for supporting the lid to keep it close..
  • ☺Size - Length(Approx.): 27cm/10.6inch. Force:100N / 22.5lb (Per Strut). More than 30cm cupboard door height requirement..
  • ☺Widely Use - Suitable for cupboards, bookcases, wardrobes, windowsill, Tatami or platform and other furnitures, bottom support..
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

BILITOOLS Strut Spreader Tool 2 Piece Suspension Tool Compatible with VW Audi BMW Mini Ford Renault ect.

  • Comes with strut spreader tool with 5.5 x 8 mm and 5 x 7 mm. 1/2" Drive.
  • 2 piece strut spreader is designed to expand the spring strut and ball joint mounting to separate the spring strut from the wheel bearing housing..
  • The strut spreader sockets are made with S2 steel for maximum strength and durability, and to resist rotational distortion..
  • The strut spreader sockets are featured an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel..
  • Compatible with Audi, BMW, Citroen, Ford, Peugeot, Renault, Seat, Skoda, VW and Japanese vehicles.
Check Stock