Walker 21602 Muffler Quiet Flowss Dms
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection.
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding.
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide structural stability and longer service life.
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes.
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on.
Check StockLenox - 80775D2B93025 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 119
- Regular tooth design for general-purpose cutting.
- Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
- Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
- Raker tooth set for general-purpose cutting applications.
- Flexible back is suitable for contoured cuts.
Check StockLenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI
- Tuff tooth design reduces tooth strippage.
- Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
- Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
- Wavy tooth set helps prevent stripping for cutting thin workpieces.
- M-42 high-speed steel tooth edge for heat and wear resistance.
Check StockLenox Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93.5" Length, 1/2" Width, 0.025" Thick, 14-18 TPI
- Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
- Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
- Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
- Wavy set helps prevent stripping for cutting thin workpieces.
Check StockLenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI
- Regular tooth design for general-purpose cutting.
- Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
- Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
- Raker tooth set for general-purpose cutting applications.
- Flexible back is suitable for contoured cuts.
Check StockLenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI
- Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
- Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
- Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
- Raker tooth set for general-purpose cutting applications.
Check StockLenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI
- Vari-tooth design for faster cutting rates than regular tooth design.
- Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
- Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
- M-42 high-speed steel tooth edge for heat and wear resistance.
- Vari-raker tooth set for multipurpose cutting applications.
Check StockLenox - 80162D2B51640 Diemaster 2 Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 10-14 TPI
- Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
- Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
- Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
- Vari-raker tooth set for general-purpose cutting applications.
Check StockPearl T930 Tom Stand, TH900S and New Trident Design Tripod
- Double braced struts on the Trident Design Tripod offer the ultimate in structural integrity to prevent lateral wobble and the inherent squeaks that may result from it.
Check StockPearl TC930 Tom/Boom Stand with New Gyro Lock, TH900S, New Uni-Lock and CH930
- Double braced struts on the tripod offer the ultimate in structural integrity to prevent lateral wobble and the inherent squeaks that may result from it.
Check StockJET HVBS-712D, 7\ x 12\ Deluxe Metal Bandsaw, 4 Speed, 3/4HP, 1Ph 115/230V (414560) & Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI
- Product 1: HORIZONTAL OR VERTICAL POSTIONS: Large 9" x 12" infeed table assembly extends the support area..
- Product 1: REPEATABILITY: Micro-adjustable tool-less material stop for accurate set-up..
- Product 1: DURABILITY: Blade wheels are made from flanged cast iron..
- Product 1: LONGER BLADE LIFE: Base contains a coolant system that helps to increase cutting efficiency and blade life..
- Product 2: Tuff tooth design reduces tooth strippage.
- Product 2: Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
- Product 2: Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
- Product 2: Wavy tooth set helps prevent stripping for cutting thin workpieces.
Check StockMonolith 4 Tier Audio Stand XL - Espresso, Open Air Design, Each Shelf Supports up to 75 Lbs, Perfect Way to Organize AV Components
- Sturdy construction: The four steel support tubes feature a scratch-resistant black powder-coated finish, while the rigid, thick MDF Shelves feature a finish that cleans easily and resists scratches and scuffs. Each shelf is acoustically Inert and can support up to 75 lbs., while the shelf with the support bar can hold up to 150 lbs.
- Open air design: the stand is designed with open air shelving for critical airflow, cooling, and ease of access to your components. Unlike most enclosed AV cabinets, This sturdy design will ensure your equipment receives plenty of circulating air that will keep them from overheating during use.
- Modular construction: The fully customizable modular design lets you build your rack exactly as tall as needed. Start with the base and add as many of the 4 shelves as you need. One set of steel support tubes are longer, allowing one tier of the stand to accommodate taller components.
- Additional support bar: attach the provided support bar underneath a shelf for additional structural bracing for your heaviest components.
- The perfect way to organize and display your AV components.
Check StockFiiO AM2A Medium-power Headphone Amplifier Module for FiiO X7 (Titanium)
- Aerospace-grade aluminum-magnesium alloy, treated with five-axis CNC machining.
- 4 Knowles DFK+SWFK BA driver units and one 13.6mm large beryllium diaphragm dynamic driver.
- S.TURBO acoustic design, exotic-inspired independent sound tubes and exotic-inspired acoustic structural design.
- Provided with a LC-3.5C earphone cable that is composed of high-purity Litz monocrystalline copper-plated silver wires..
- Create your own sound with 3 pairs of interchangeable sound filters and 15 pairs of eartips (with 3 pairs of SpinFit tips in S/M/L).
Check Stock