Reviews Structural Steel Plate

Titan Attachments 1/2\ Thick Heavy Duty Quick Tach Skid Steer Style Mount Plate

  • ... you want it done fast. Plowing snow, removing debris, or transporting scraps can be tedious when done by hand. Instead, make your tractor do the work! Our mount plate will help you add virtually any attachment, so you can finish up your work quickly..
  • STRONG STURDY MATERIAL: This tractor plate is made from grade 50 structural steel. Since its made from durable steel, its strong enough to handle heavy load work. You can pack on excessive weight without worrying about the plates bowing or bending. These structural steel plates have greater resistance to corrosion than standard steel, giving you years of use..
  • SPECIFICATIONS: This mount plate has an outside width of 46" and an inside width of 45". It is 18.5" high. The top bar is 1/2" thick while the plate is also 1/2" thick. It weighs approximately 125 lbs. Its convenient size makes setup and hookup to your tractor straightforward and effortless. Order yours today!.
Check Stock

Knife Blade Steel - High Carbon Annealed, 1095 Knife Making Billets, 6 Inch x 12 Inch x 0.161 Inch

  • The 8" x 8" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting..
  • These steel plates weighs 5.75 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly..
  • These steel plates are an ideal base for painting for it have a smooth, stained-grey finish that makes your paint not to peel or chip off easily. A good top coat will make the best finish and protection on your metal. Steel base plates are essential for many kinds of support, particularly where posts need to be anchored to concrete surfaces. They are especially useful where structures are subject to heavy vibration. They also can be useful for mounting permanently installed equipment..
Check Stock

Bobco Metals Hot Rolled Steel Base Plate A36 4\ X 4\ - 4 Holes 3/8\ Diameter - Rounded Corners - 3/16\ Thick - 10 pcs

  • The 8" x 8" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting..
  • These steel plates weighs 5.75 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly..
  • These steel plates are an ideal base for painting for it have a smooth, stained-grey finish that makes your paint not to peel or chip off easily. A good top coat will make the best finish and protection on your metal. Steel base plates are essential for many kinds of support, particularly where posts need to be anchored to concrete surfaces. They are especially useful where structures are subject to heavy vibration. They also can be useful for mounting permanently installed equipment..
Check Stock

VEVOR Skid Steer Mount Plate Thick Skid Steer Attachment Plate Steel Quick Attachment Loader Plate with 3 Additional Welding Rods Easy to Weld or Bolt to Different Accessories 1/4

  • Great Compatibility: This skid steer mount plate is universally compatible with loaders, tractors and other vehicles with an internal width up to 45",....
  • Sturdy Structural Steel: The quick tach mount plate is built with heavy-duty grade 50 structural steel, therefore, it is capable of handling all kinds....
  • Effortless Installation: The skid steer plate attachment can be directly hooked up to your tractor, loader and other machines, and then you can weld....
  • Firmly Welded: Each part of our skid steer attachments has been firmly welded and has passed a series of quality tests, so there is not worry about it....
  • Wide Application: The skid steer mount plate is suitable for a variety of vehicles. It can work with other attachment to shovel snow, dispose of....
Check Stock

Patriot Metals - A36 | 1/4\

  • The 4" x 4" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting..
  • These steel plates weighs 0.5 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly..
Check Stock

Metal Table Legs - H Style - Rustic Industrial Finish

  • 4" Wide x 1/4" Solid Steel Mounting Plate with Screw Holes.
  • Distressed Natural Steel Finish with Durable Satin Clear Coat.
Check Stock

RMP Hot Rolled Carbon Steel Rectangular Tubing, 3 Inch x 2 Inch Sides, 11 Ga. Wall, 72 Inch Length

  • The 3" x 3" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting..
  • These steel plates weighs 0.25 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly..
Check Stock

JACKEL 1/2 HP Pre-Plumbed Sump Pump System (Model: JPACK22S-250V)

  • 1/2 HP Sump Pump w Stainless Steel Housing, Cast Iron Volute, SJE-Rhombus Vertical Switch, Piggyback Plug.
  • Polyethylene Structural Foam Sump Basin ( 18 x 24 in. / 22 Gal. Capacity ).
  • Polyethylene Structural Foam Sump Basin Cover ( 1.5 in. Threaded Discharge Flange, 2 in. Threaded Vent Flange, 2-Hole Cord Grommet, Clear View Removable Inspection Plate and DrainTrap ).
  • 1.5 in. / 1.25 in. Check Valve and 4 in. Inlet Hub.
Check Stock

Bobco Metals Hot Rolled Steel Base Plate A36 3\ X 3\ - 4 Holes 3/8\ Diameter - Rounded Corners - 3/16\ Thick - 10 pcs

  • The 4" x 4" Hot Rolled Steel Base Plate is a structural quality steel plate that is used in a wide range of general and industrial applications, such as base plates, road plates, trench coverings, and more. Also, It provides a fine, smooth surface,which creates an excellent base for painting..
  • These steel plates weighs 0.5 lbs each. They are thick enough to hold up posts, and provide a large enough surface area to distribute weight evenly..
Check Stock

HECASA 1/2\ New Quick Tach Mount Plate Attachment Skid Steer Loader Compatible with Kubota and Bobcat Skid Steers and Tractors

  • The Brand New 1/2" Quick Tach Loader Mount Plate can easily weld or bolt onto plows, forks, or any attachment that you want to convert to quick tach hookup. Please note this is unpainted..
  • Weight: 125 lb. Outside width: 46". Inside width: 45". Height: 18.5". Top bar:3/8" thick .Plate: 1/2" thick. Its convenient dimensions allow it to be installed and hooked up to the tractor effortlessly..
  • Made of Grade 50 structural steel which enables itself more durable and more corrosion resistant than standard steel. It has a longer lifespan..
  • Fits skid steers with the universal quick tach mounting system and tractors with the skid steer style quick tach..
  • All joints of the attachment mounting plate are solidly welded without safety concerns.Just let our plates share the load..
Check Stock

Champ Instant Floor Plate – for Installing Floor Anchor Pots in New Concrete Slab - Professional - Made in USA

  • STRUCTURAL REINFORCEMENT – It serves as permanent ground reinforcement underneath the concrete slab. Having this plate installed improves the anchor....
  • HELPS BALANCE THE ANCHOR POT – The Champ Instant Floor Plate is the perfect base, distributing the weight of the anchor pot while keeping the anchor....
  • EASY INSTALLATION – Use when pouring a new concrete floor for added strength. Simply install the Floor Plate onto each anchor pot, set anchor pots....
  • SAVE MONEY – This floor plate, along with the anchor pot and lid, is a complete anchoring system that makes do-it-yourself installations easier and....
  • HEAVY DUTY – Whether used in permanent installations or as a floor guide, these instant floor plates are strong and reliable. It is 100% steel, and....
Check Stock

ECOTRIC 1/2\ 3/8\ Thick Steel Quick Tach Attachment Mount Plate Skid Steer Adapter Bobcat. with One Year Warranty (3/8\)

  • 【Description】 ECOTRIC thick mount plate can easily weld or bolt onto plows, forks, or any attachment that you want to convert to quick tach hookup. Fits skid steers with the universal quick tach mounting system and tractors with the skid steer style quick tach..
  • 【Features】 *One Year Warranty! *Ease to weld Made from Grade 50 structural steel *Condition: 100% Brand New *Material: Heavy Duty Steel.
  • 【3/8" Specifications】 Weight: 53 lbs ,Outside width: 46" Inside width: 45" ,Height: 18.5" ,Top bar: 3/8" thick, Plate: 3/8" thick.
  • 【1/2" Specifications】 Weight: 68 lbs,Outside width: 46.
Check Stock

SKILFUL Cut Off Wheels 50 Packs, 4 1/2 inch Ultra Thin Cutting Wheels Anti-vibration Angle Grinder Cutting Discs for Metal and Stainless Steel Cutting

  • ...ff tools,accessories for DEWALT,Makita ,Bosch,Ryobi and so on.
  • MULTIPLE UESES---The angle grinder disc are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive cutting action.Cut through all metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel.
  • Global Certification---The annual sales of SKILFUL cutting wheels exceed 300 million. Has obtained CE, FCC and SGS certification. 13300RPM/80m/s speed can ensure 100% safety.
Check Stock