Reviews Structural Shapes
Lenox RX+ Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Extra Heavy Set, Positive Rake, 222\ Length, 1-1/4\ Width, 0.042\ Thick, 2-3 TPI
- RX+ vari-tooth design reduces strippage at high feed rates.
- Bimetal for cutting carbon steel and structural steel.
- Good for cuts in tubular shapes, structural shapes, and tubular bundles.
- Optimized variable pitch and set sequence for quiet cutting and low vibration.
Check StockLenox - 93328RPB72360 RX+ Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 5-8 TPI
- RX+ tooth design reduces strippage at high feed rates.
- Bimetal for cutting carbon steel and structural steel.
- Good for cuts in tubular shapes, structural shapes, and tubular bundles.
- Optimized variable pitch and set sequence for quiet cutting and low vibration.
- Made of M-42 high-speed steel for heat and wear resistance.
Check StockLenox Classic Tuff Tooth Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 186\ Length, 3/4\ Width, 0.035\ Thick, 3 TPI
- Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
- Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
- Good for cuts in cylindrical solids, tubular shapes, and structural shapes.
- M-42 high-speed steel tooth edge for heat and wear resistance.
- Raker set for general-purpose cutting applications.
Check StockLenox Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93.5" Length, 1/2" Width, 0.025" Thick, 14-18 TPI
- Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
- Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
- Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
- Wavy set helps prevent stripping for cutting thin workpieces.
Check StockLenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI
- Regular tooth design for general-purpose cutting.
- Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
- Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
- Raker tooth set for general-purpose cutting applications.
- Flexible back is suitable for contoured cuts.
Check StockLenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI
- Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
- Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
- Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
- Raker tooth set for general-purpose cutting applications.
Check StockLenox - 80162D2B51640 Diemaster 2 Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 10-14 TPI
- Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
- Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
- Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
- Vari-raker tooth set for general-purpose cutting applications.
Check StockStarrett - 99210-07-09 Versatix MP Band Saw Blade, Bimetal, Versatix Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 6-10 TPI
- Bimetal blade is designed for cutting structural steel.
- Good for cuts in structural and tubular shapes and tubular bundles.
- Versatix tooth design dissipates stress for less tooth breakage and longer blade life.
- Positive rake angle for intermittent cutting.
- Raker set helps clear chips for reduced clogging.
Check StockLenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI
- Tuff tooth design reduces tooth strippage.
- Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
- Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
- Wavy tooth set helps prevent stripping for cutting thin workpieces.
- M-42 high-speed steel tooth edge for heat and wear resistance.
Check StockLenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI
- Vari-tooth design for faster cutting rates than regular tooth design.
- Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
- Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
- M-42 high-speed steel tooth edge for heat and wear resistance.
- Vari-raker tooth set for multipurpose cutting applications.
Check StockBlue Demon RG45 X 3/32 X 36' X 10LB Box Oxy-Acetylene Gas Welding Rod
- You do not need flux when brazing with this product.
- Typical applications include steel sheets, plates, pipes, casting, structural shapes.
Check StockJET HVBS-712D, 7\ x 12\ Deluxe Metal Bandsaw, 4 Speed, 3/4HP, 1Ph 115/230V (414560) & Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI
- Product 1: HORIZONTAL OR VERTICAL POSTIONS: Large 9" x 12" infeed table assembly extends the support area..
- Product 1: REPEATABILITY: Micro-adjustable tool-less material stop for accurate set-up..
- Product 1: DURABILITY: Blade wheels are made from flanged cast iron..
- Product 1: LONGER BLADE LIFE: Base contains a coolant system that helps to increase cutting efficiency and blade life..
- Product 2: Tuff tooth design reduces tooth strippage.
- Product 2: Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
- Product 2: Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
- Product 2: Wavy tooth set helps prevent stripping for cutting thin workpieces.
Check StockImachinist S6412126 Bi-Metal Band Saw Blades 64-1/2\ X 1/2\ X 6tpi for Cutting Metal
- Bimetal blade is designed for cutting low alloy steel.
- Good for cuts in solid, structural, and tubular shapes.
- Variable tooth pitch reduces noise levels and vibration.
- Intenss tooth design with positive rake angle for high-production cutting operations.
- Raker set helps clear chips for reduced clogging.
Check Stock