Reviews Structural Dome Head Rivets

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

Stainless Steel Pop Rivets 3/32 Diameter #3 All 304 Stainless Steel Blind Rivets 3-2 3/32 x 1/8 Grip 0.032-0.125 Qty 100

  • Open End Dome Head Pop Rivets (Blind Rivets).
  • All 304 Stainless Steel Construction for Long Lasting Applications - Excellent Corrosion & Rust Resistance.
  • Rivet Diameter: 3/32 inch (#3, 0.094 inch).
  • Drill (Hole) Size: #41 Bit, 3/32" Hole (0.096 - 0.100).
Check Stock

Stainless Steel Pop Rivets 1/4 Diameter #8 All 304 Stainless Steel Blind Rivets 8-6 1/4 x 3/8 Grip 0.251-0.375 QTY 100

  • Open End Dome Head Pop Rivets (Blind Rivets).
  • All 304 Stainless Steel Construction for Long Lasting Applications - Excellent Corrosion & Rust Resistance.
  • Rivet Diameter: 1/4 inch (#8, 0.250 inch).
  • Drill (Hole) Size: F Bit, 1/4" Hole (0.257 - 0.261).
Check Stock

DREAMLANDSALES 120Pcs (M3.2—M4) Red Copper Blind Rivets Pop Rivets Assortment Set Self-Plugging Open End Dome Head Decorate Fastener Brass Mandrel Pop Rivets Core for Sheet Metal Railway Furniture

  • Package Include: Goods Set include 120pcs pop rivets for your use, which size are m3.2x9, m3.2x6.4, m3.2x12, m4X6.4, m4X8, m4X11, each size for 20pcs. They are well packed in a plastic box.There are 6 vary sizes to accommodate a variety of riveting jobs, 20 pcs for each size are enough for your metal work .Clear PP box is ideal for assort all of sizes ,easy to clarify and clear with mar A nice collection for short, long, thick and thin rivets for your choice..
  • Description: This package includes total 120 pcs Red Copper Blind Rivets, sizes are M3.2x9, M3.2x6.4, M3.2x12, M4X6.4, M4X8, M4X11, each size for 20pcs , open end dome head copper rivets with steel mandrel in storage case.
  • Material: Pop rivets are made of red copper head and aluminum body . Acid and corrosion resistance. Surface is smooth, strong yet lightweight, easy to install, well match with the rivet gun..
  • Character: Perfect for most environments because of their superior thermal and electrical conductivity. The blind rivets has a mandrel which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to j....
Check Stock

Metal Magery 100 Copper Pop Rivets 1/8 Diameter Brass Mandrel Blind Rivets Dome Head 4-4 1/8 Diameter x 1/4 Grip Qty 100

  • Open End Dome Head Copper Rivets with Brass Mandrel.
  • (1/8 inch) Diameter Blind Rivets - Corrosion & Rust Resistant with a Decorative Finish.
  • Great for a wide variety of applications and commonly used for for fastening copper or brass sheets.
  • Perfect for most environments because of their superior thermal and electrical conductivity.
Check Stock

3M Scotch 4910 VHB Tape: 1 in. x 15 ft. (Clear)

  • 3M 4910 VHB Tape is excellent for double-sided applications where clear or colorless is desired. The general purpose adhesive on both sides is suitable for high surface energy substrates like glass or metal..
  • Application ideas include sealing between the inner and outer dome of skylights, attaching handles to glass doors, mounting back lit translucent signs and edge bonding resin filled glass..
  • 3M VHB Tape provides the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior structural bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners..
  • 3M 4910 VHB Tapes are made with acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics..
  • The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance..
Check Stock

USA Fittings 100 Copper Pop Rivets 1/8 Diameter Brass Mandrel Blind Rivets Dome Head 4-4 1/8 Diameter x 1/4 Grip Qty 100

  • Open End Dome Head Copper Rivets with Brass Mandrel.
  • #4 (1/8 inch) Diameter Blind Rivets - Corrosion & Rust Resistant with a Decorative Finish.
  • 4-2 Grip Range: (0.020 - 0.125), 4-4 Grip Range: (0.188 - 0.250).
  • Great for a wide variety of applications and commonly used for for fastening copper or brass sheets.
  • Perfect for most environments because of their superior thermal and electrical conductivity.
Check Stock

USA Fittings Copper Pop Rivets 1/8 Diameter Brass Mandrel Blind Rivets Dome Head 4-2 1/8 Diameter x 1/8 Grip 1/8 Diameter x .063-.125 Grip Range Qty 100

  • Open End Dome Head Copper Rivets with Brass Mandrel.
  • (1/8 inch) Diameter Blind Rivets - Corrosion & Rust Resistant with a Decorative Finish.
  • Great for a wide variety of applications and commonly used for for fastening copper or brass sheets.
  • Perfect for most environments because of their superior thermal and electrical conductivity.
Check Stock

LIFT Safety DAX Fiber Resin Full Brim (Blue)

  • A Carbon Fiber reinforced resin shell provides superior structural rigidity..
  • Brim grip, exclusive design provides a secure feel.
  • Perforated synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head.
  • Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on.
Check Stock

Glarks 210Pcs 6 Size Aluminum Body Steel Mandrel Dome Head Blind Rivets Pop Rivets Assortment Set

  • Type: Round Dome Head Open End Aluminum Blind Rivet.
  • Material: Made of high quality aluminum alloy, never rust, good anti-corrosion property, sturdy, light, durable and long life..
  • Head Size: Diameter 3/16"(4.8mm), Length: 1-3/16"(30mm). Grip Pange: Diameter 3/16"(4.8mm), Length: 3/4"-1"(19-25mm).
  • Applications: Widely used in construction, automobile, ship, aircraft, machinery, electric equipment, furniture, etc. Especially suitable for the riveting occasions where is not convenient to adopt ordinary rivet..
Check Stock

Black Pop Rivets 1/8 Diameter #4 All Aluminum Painted Blind Rivets 4-3 1/8 x 3/16 Grip QTY 250

  • 4-3 Grip Range: 3/16" (0.126 - 0.187), 4-4 Grip Range: 1/4" (0.188 - 0.250).
  • Paint finish on a 1/8 All Aluminum Pop Rivet.
Check Stock