Reviews Stronger X y Axis Rails

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ENGRAVING MACHINE PARAMETERS】 X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm Outside dimension: 865*680*570mm（L*W*H） Table size: 770（Y）*490（X）mm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (differ....
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • ...s on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height..
  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
  • The extra spindle mount, laser module and other upgraded accessories are available for order. You could upgrade the machine easily based on your needs. If y....
Check Stock

UNITED CHEMI-CON ESMQ201VSN222MR50S CAPACITOR ALUM ELEC 2200UF 200V 20%, SNAP-IN (1 piece)

  • The aluminum base of the guide rail is relatively resistant to corrosion and is inlaidwith a steel shaft..
  • Superior for light and medium loads fast running speed and low noise..
  • Compact structure and beautiful appearance..
  • Equipped with U-shaped bearing roller and timing belt is not included.
  • In general, the length of X axis is longer than that of Y axis.If you need the Y axis longer than the X axis, you can also customize.
  • Any size can be customized, please feel free to contact us if you need other size.
Check Stock

Genmitsu 3020-PRO MAX CNC Router Machine for Metal Carving and more, GRBL Offline Controller, with Limit Switches & Emergency-Stop, XYZ Effective Working Area 300 x 200 x 72mm (11.8 x 7.9 x 2.8inch)

  • Bigger and better with an all new extra rigid and beefy design featuring an increased Z Height of 72mm dual steel X axis guide rails, all aluminum spindle holder and 300W spindle. All these upgrades make metal carving easier, ideal for an endless variety of drilling, and carving operations on various metals, like brass, copper and 6061 aluminum, etc..
  • Upgraded linear guide structure and 4040 Y axis profiles highly improve the engraving accuracy and processing strength, eliminating Z axis wobble issues that most other desktop CNC machines have..
  • One-piece machined and molded aluminum design ensures flatness and strength of the work platform. Integrated measurement scale is convenient for material positioning. The platform is compatible with most of the CNC clamps on the market..
  • Everything you need out of the box. The Genmitsu 3020-PRO MAX router already includes all of the accessories and components you need at an affordable price, including offline controller, XYZ axis limit switches, emergency stop switches, Z-probe and more..
  • The pre-assembled module of XZ Axis Gantry and Base A....
Check Stock

Official Creality Ender 5 Pro Upgrade 3D Printer with Silent Motherboard Metal Extruder Frame and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm

  • Upgraded Metal Print Head Frame: The upgraded metal print head of creality ender 5 pro has better and stronger pressure, which can push the filament....
  • Silent Motherboard: Official ender 5 pro has ultra-quiet motherboard, quieter and more precise. The upgraded motherboard has solid filters and....
  • Dual Y Axis, Stable Output: Creality ender 5 pro with dual Y-axis control system, synchronous operation, stable output, ensuring high performance and....
  • Brand Power Supply: Ender 5 pro built-in brand power supply, which can be heated quickly and safely. The hot bed can be heated to 110°C within 5....
  • Resume Print Function: When the power is restored, creality ender 5 pro 3d printer will continue to print from the interruption point..
Check Stock

Linear Rail SBR12 1000mm 12mm CNC 2PCS Linear Rail Slide Guide Shaft 4PCS SBR12UU Bearing Blocks for Automated Machines and Equipments

  • LINEAR RAIL KITS: 2 pieces of linear rail 1000 mm/39.37" long rail shafts and 4 Pieces SBR12UU blocks. Sliding blocks to be used cooperatively with rails..
  • EASY TO INSTALL: Aluminum support rail with pre-drilled holes for ease of mounting.Suits X, Y, Z axis..
  • ADVANTAGE: Premier Linear Guiding System.The support rail unit provides maximum rigidity and stiffness to the shaft throughout the whole stroke, and ensure the performance of the unit..
  • HIGH-QUALITY STEEL MATERIAL: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment makes it anti-rust, durable, and extremely hard..
  • WIDELY USED: It is widely used in linear motion system. Such as, punch, tool grinding machine, automatic cutting machine, printer, card sorting machine, food packing machine, other sliding parts on industrial machinery..
Check Stock

Creality Ender 5 Pro 3D Printer 32-bit V4.2.2 Silent Mainboard DIY FDM Printing Powerful Filament Extruder Resume Printing Cubic Structure High Precision Print Size 8.7x8.7x11.8 inch

  • 【US Engineer Professional Tech Support Safe Buy】100% Original Factory CREALITY Ender 5 Pro 3D Printer, we got U.S. Engineers Tech Support and....
  • 【Upgraded Ultra Mute Mainboard】Ender 5 Pro 3d printer equipped with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, always ensures smooth....
  • 【Double Y-axis】Ender5 Pro has double Y-axis control system with synchoronus operation and stable output to avoid vibrations resulting from....
  • 【Metal Extruder Kit】Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving the printer's....
  • 【Why Ender 5 Pro?】Enhanced safety, more silent printing performance as well as a combination of DIY fun and whole machine stability with high....
Check Stock

Roly LaserMATIC10 Laser Engraver with 10W Output, Rotary and Air Assist Included, Laser Engraver for Wood, Metal, Fabric and Paper, 406x387mm

  • [Everything you need] Includes rotary (with end support for tapered tumblers) and air assist with 30 L/min flow rate - all the tools you need to tackle a wide variety of jobs, everything built from the ground up to work together!.
  • [Competitive performance] Engrave at up to 300mm/s or 18,000mm/min. Cuts 6mm plywood in one pass at 240mm/min. Blue laser focuses down to 0.08*0.08mm..
  • [Switch between jobs in seconds] 106mm of z-axis travel means you can switch between flat pieces and tumbler within seconds, without the need to mess with extensions or raising the entire machine..
  • [Unleash your creativity] Our blue diode laser engraves and cuts a wide variety of materials, including wood, stainless steel, powder-coated surfaces, paper, leather and acrylic (dark colors)..
  • [Exceptional build quality] Milled from custom aluminum extrusion with linear guide rails on X and Y-axis. The LaserMATIC10 brings a level of quality not previously seen with consumer-grade laser engravers and cutters..
Check Stock

【SINIT-TTL Current Analog Tilt Switch】High-Stability Dual-axis Analog (4-20mA,±90 Degrees) Security Inclinometer, Anti-Vibration Tilt Angle Sensor (IP67 Waterproof) for Constructions Monitoring

  • 【 Current-type Analog Inclinometer 】Dual-Axis Inclination Measuring: X-axis & Y-axis ( +-90 degree), Dual Axis Analog 4-20mA Current Data Output.
  • 【 Robust Design 】 Cortex-M0 core processor, highly-integrated MEMS, and Kalman Algorithm combine to deliver measurement accuracy at 0.1 degree(X, Y-axis) even in the dynamic environment, professional for industrial safety monitoring system.
  • 【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering ensuring stable data output and excellent bias stability, low noise level, increasing measurement accuracy.
  • 【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com.
  • 【 What You Get 】1 x WitMotion SINIT inclinometer(9-36V TTL version) + 1 x Welcome guide (USB-UART converter not included ).
Check Stock

【SINVT Voltage-Output-Type Tilt Switch】High-Stability Dual-axis Analog (0-5V, 0.05° Accuracy) Secury Inclinometer, Anti-Vibration Tilt Angle Sensor (IP67 Approved) for Building/Bridge Monitoring

  • 【 Voltage-type Analog Inclinometer 】Dual-Axis Inclination Measuring: X-axis & Y-axis ( +-90 degree), Dual Axis Analog 0-5V Voltage Data Output.
  • 【 Robust Design 】 Cortex-M0 core processor, highly-integrated MEMS sensor, and Kalman Algorithm combine to deliver measurement accuracy at 0.1 degree(X, Y-axis) even in the dynamic environment, professional for industrial safety monitoring system.
  • 【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering ensuring stable data output and excellent bias stability, low noise level, increasing measurement accuracy.
  • 【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com.
  • 【 What You Get 】1 x WitMotion SINVT inclinometer(9-36V TTL version) + 1 x Welcome guide (USB-UART converter not included ).
Check Stock

Arduino Uno Nano 4 Axis Stepper Control CNC Mill G-Code Translator A4988 Compatible Easy to Use and Friendly Software

  • Runs on almost any PC which has : WIN 10, 8, 7, XP, Millenium, NT 2K, 98. Low PC CPU loading, that do not hang or overload your PC, so you can use....
  • Load your g-code and start machining. Easy straight forward operation. Quick configuration for many cnc type. Simple configuration for custom cnc..
  • When powering down record position of cnc x,y,z,w.
  • so it does not loose cnc machine position at start up. Integrated firmware to easily program....
  • Hints to help and guide during operation plus tutorial videos all embedded in the software. Up to 16 khz operation for precise stepper motor motion..
  • Jogging on all 4 axis x, y, z, w. 4th axis (w) can be geared to x or y (via g-code) to create surface of revolution. Emergency shutdown for safe....
Check Stock

ARCELI 5PCS PS2 Joystick Game Controller XY Dual-axis Joystick Breakout Module Compatible with Arduino

  • PS2 game joystick axis sensor module consists of using original quality metal PS2 joystick potentiometer system For the (X, Y) a 2-axis analog output and for (Z) 1 digital output channel button..
  • Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin..
  • This joystick module can be easily connect to Arduino by normal IO Expansion Shield with supplied cables..
Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock