Reviews Strong Current High Load

Miniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay AC 0-30A Detectable（M3050）

  • Multi-Purpose: M3050 AC with rails current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
Check Stock

Current Sensing Switch/Relay,AC Current Sensing Switch 0-200A Normally Open Current Sensor Monitoring Relay,Linkage PLC Signal,Overload Controller M3080）

  • Multi-Purpose: M3080 AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-200A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-200A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
  • ABS material: High-power MOS tube non-con....
Check Stock

GoolRC 80A Brushless ESC Waterproof Electric Speed Controller for 1/10 RC Truck Off-Road Car

  • Waterproof and dustproof, perfectly fit for 1/10 RC car..
  • Strong resistant current capability and excellent heat dissipation, Easily programmed and compatible with pocket-sized program card..
  • High current capability of 80A continuous current and 480A burst current ensures a stable driving..
  • Protection function includes low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection..
  • High-frequency drive system and Low-resistance field effect tube enhances load capacity and improve the utilization rate of power source..
Check Stock

GoolRC 120A Brushless ESC Waterproof Electric Speed Controller for 1/8 1/10 RC Truck Off-Road Car

  • Waterproof and dustproof, perfectly fit for 1/10 1/8 RC car..
  • Strong resistant current capability and excellent heat dissipation, Easily programmed and compatible with pocket-sized program card..
  • High current capability of 120A continuous current and 600A burst current ensures a stable driving..
  • Protection function includes low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection..
  • High-frequency drive system and Low-resistance field effect tube enhances load capacity and improve the utilization rate of power source..
Check Stock

200A High Precision Power Analyzer Watt Meter Battery Consumption Performance Monitor with LCD Backlight for RC, Battery, Solar, Wind Power

  • 【REAL-TIME READING】200A high precision power analyzer convenient to calculate the voltage, current, power, discharge amount and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Predict model airplane flight time,Choose the best propeller/most efficient motor..
  • 【HIGH PRECISION】Current: 0-200A, continuous current 50A, resolution 0.01A. Operates from 4.8-60V (When the test voltage is lower than 5v, a separate 12v power supply is required to power the power meter), resolution 0.01V. Measures 0-6554Wh, resolution 0.01Wh. The current can determine the battery capacity, the continuous current can determine the discharge time, and the maximum instantaneous current can determine the internal structure of the battery to protect circuit..
  • 【MULTI-FUNCTIONAL】Watt meter power analyzer can verify sufficient operating voltage under load and prevent peak currents damaging battery, motor control, motors, wiring and connectors.
  • Verify correct battery charger operation (connect your battery and charger).
  • Set the cut-off voltage and check the battery capacity.
  • Detect the receiver and the actual operating current to determine whether UBEC, etc..
  • 【BACKLIT LCD SCREEN】Watt meter comes with a 16 * 2 backlit LCD screen, so....
Check Stock

DC Power Supply Variable Eventek Adjustable Switching DC Regulated Bench Power Supply with 4-Digits LED Display, USB Interface, Alligator Cord/Test Lines (30V 10A)

  • 【ADVANTAGE】Novel design, strong and durable, portable handle, easy to handle. Constant voltage, constant current automatic conversion, can be uesd as a constant voltage source, can also be used as a constant current source..
  • 【PRODUCT CHARACTERISTICS】The Adjustable DC Regulated Power has plastic panel, beautiful and generous. Hand-held design, easy to carry. Voltage and current are adjusted roughly and finely to adjust voltage and current accurately..
  • 【TEMPERATURE CONTROL】Temperature control, according to the load speed adjustment, effectively reduce the noise, prolong the life of the fan. Perfect protection functions, adjustable overvoltage protection (OVP), short circuit current limiting protection (OCP), overtemperature protection (OTP), overpower protection (OPP)..
  • 【LINEAR ADJUSTMENT MODEL】PWM switch pre-voltage regulation, MOS linear adjustment mode, high effciency, energy saving and envirronmental protection, SMT process, more stable performance. The circuit design is reasonable, the key components are imported and can be used at full load for a long time..
  • 【WIDE APPLICATION】Aging test of factory products: such as DC motor, DVD, audio, resistor, capacitor and other products. Battery Charging Industry: Perfect application in batte....
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Hxchen 5.0mm Male Female Banana Plug Bullet Connector Replacements - (5 Pairs)

  • Type: Male and female banana bullet connector.
  • The main bar is made of brass with a gilded surface,durable, corrosion resistant, low resistance, gives the good electric flow..
  • Low resistance, and gives the best electric flow. It is mainly used for car model, aero-model, medical wire, high-end lithium battery plug and other high-end products..
  • These bullet connector replacements can connect ESC or battery with electronic equipment such as RC helicopter ,car,truck and so on,it can connect motor with electronic speed control(ESC)..
  • Lantern type public plug structure, good elasticity, good conduction and reliable performance, with strong over load current capacity, can meet the needs of large current charge and discharge ..
Check Stock

sainsmart 8-CH SSR 5A DC-DC 5V-220V Solid State Relay

  • Size: 45 x 57 x 28mm/1.76x2.25x1.1inch(L*W*H).
  • Sealed high temperature resistance housing.
  • 10 to 25A radiator cooling,more than 25A must on the radiator and fan cooling..
  • The current on the product is the maximum load current, not the rated current..
Check Stock

yan AC Adapter for Toshiba Satellite C855D-S5303 Laptop PC Charger Power Cord Supply

  • Over-charge protection Short Circuit Protection Over Voltage Protection Electromagnetic Compatibility Input: AC 100V - 240V 50-60Hz Input Connecter....
  • Peak- to -peak ripple: Working temperature: 0-35¡æ@100%,50¡æ@70% load Setup rise hold up time: 100ms,50ms,20ms.240VAC input Strong made totally....
  • Over voltage protection: 115%-135% rated output voltage Withstand voltage: I/P-O/P 3Kvac,1 minute Over load protection: 115%-135% fold back current....
Check Stock

Hxchen 5.0mm Male Female Banana Plug Bullet Connector Replacements - (10 Pairs)

  • 【Type】: Male and female banana bullet connector.
  • 【Material】: The main bar is made of brass with a gilded surface,durable, corrosion resistant, low resistance, gives the good electric flow..
  • 【Application】: Low resistance, and gives the best electric flow. It is mainly used for car model, aero-model, medical wire, high-end lithium battery plug and other high-end products..
  • 【Function】: These bullet connector replacements can connect ESC or battery with electronic equipment such as RC helicopter ,car,truck and so on,it can connect motor with electronic speed control(ESC)..
  • 【Feature】: Lantern type public plug structure, good elasticity, good conduction and reliable performance, with strong over load current capacity, can meet the needs of large current charge and discharge..
Check Stock

Cigarette Lighter Socket Car Marine Motorcycle ATV RV Lighter Socket Power Outlet Socket Receptacle 12V Waterproof Plug by ZHSMS

  • ACCURATE SIZE: 2.9x5.5cm/1.2x2.2inch( Height: about 5.5cm.
  • EASY TO INSTALL :Convenient for daily use.Dust cover is waterproof and keeping away from dust.Each socket has a retaining nut against a panel..
  • Durable flame-resistant hard plastic, which is resistance to high current, high temperature and wear resistant,work perfectly with any car powered devicesand also you can use the connectors we offered for higher load capacity..
  • 39.4 INCHES WIRE:Long wire can fit most car ,need not to worry about that the socket cant reach the power..
  • FUSE FOR OVER-LOAD PROTECTION: Any DC 12V/24V or high load capacity will be protected to burn when the current is to high.Dont worry about the current in your car..
Check Stock