Reviews Stroke Engine Oil
Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)
- Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm(17.32inches) (inclusive) transom height.
- Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
- Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
- Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
- The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)
- ①4 STROKE 4 HP OUTBOARD MOTOR ENGINE:The JET PUMP 4HP 4 Stroke Outboard Motor Boat Engine provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
- ②DETAILS: Model: 4.0 horsepower jet pump.
- Refueling method: No. 92 unleaded gasoline is recommended..
- ③SIZE INFORS: Packing volume: 95*42*29cm/37.4*16.5*11.4inch.
- Gross weight/net weight: 13(28.66lb)/9.7kg(21.3lb).
- Recommended engine oil: four-stroke engine oil.
- ④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
- Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
- The fuel tank of the four-stroke outboard engine can only be filled with....
Check StockMOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)
- Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
- The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check StockSUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red
- Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
- The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check StockMOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Black)
- MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
- Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check StockTRIBLE SIX 50CC 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit Set (Black)
- 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter.
- Fits for most 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- Key parameters: bore and stroke 40mm x 38mm=48cm3, Max. power 1.6Kw/6000r/min (3 horsepower/6000r/min), Super fuel-efficient, only consuming 1.5L fuel/100km.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check StockMOTOOS 80CC 24' 26' 28' Bicycle Engine Kit Bike Bicycle Motorized 2 Stroke Cycle Motor Engine Kit (Silver)
- MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
- Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check Stock80cc Bicycle Engine Kit 26' 28' Bicycle Motor Engine Kit 2 Stroke Gas Motorized Bike Motor Kit Upgrade Silver
- Bicycle 26 & 28 inch: Fits for most 26″ or 28′ wheeled bikes with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″).
- 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check StockHURRICANE Fork-Up Mount Adapter Envy Road 12x100mm T-A Fork - HU4769
- 2-stroke 50cc or 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach....
- Fits most 26" or 28' wheeled bikes with standard V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the....
- Key parameters: Rated Power:1.15Kw~2.5kw/5000r/min.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 32: 1 after....
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to....
Check StockTFCFL 2 Stroke 18HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,246CC Heavy Duty Boat Engine Short Shaft 13.2KW
- 【2 STROKE 18HP OUTBOARD MOTOR ENGINE】 Displacement: 246CC.
- Packing size:133x71x38.5cm/52.3''x27.9''x15''.
- 【Main Parameters】Control System: #93 gasoline.
- Recommended Propeller range: 3 -9"1/4''x8".
- Recommended Lubricant: 2 Stroke Lubricating oil.
- 【 2 Stroke 18HP Outboard Motor 】Water cooling technology to improve the reliability of the whole machine.
- Light weight, easy to carry, unique appearance, large tank capacity.The engine oil must be a two-stroke special engine oil. Note:The two oils must be stirred evenly.
- After use, the fuel in the carburetor must be completely discharged..
- 【 High Efficiency 】Outboard vertical mount engine design for increased power, performance and durability, superior CDI Igniti....
Check StockSUNROAD 50cc Bicycle Engine Kit 26' 28' 2-Stroke Motorized Motor Bike Kit for Mountain and Road Bike Cycle Motor Kit Black
- This 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike, you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter..
- Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check StockOutboard Motor 6HP 4 Stroke Outboard Motor Tiller Shaft Boat Engine Fishing Boat Engine Single Cylinder Air-Cooling 6HP 4-Stroke
- ▶This 6HP 4-Stroke Outboard Engine: Model:single cylinder、air cool、four stroke、hand pull.
- ▶Detailed Information:Ignition system:transistor non-contact electronic ignition.
- Noise exhaust method: muffler out machine....
- ▶Premium Quality: Durable cast aluminum construction for superior corrosion protection.
- vertical mount engine design for increased power,....
- ▶Tips: Add gasoline and engine oil to the box accordingly. (a box to add gasoline and a box to add engine oil) Don't mix the gasoline with engine....
- ▶About US: Ship from US stock ! We have our own overseas warehouse and a professional Customer Service Team to reply you within 24 hours. If you....
Check StockParts-Diyer 50cc Bicycle Engine Kit 2 Stroke Bike Motorized Petrol Gas Motor Engine Kit for 26' 28' Mountain and Road Bike Cycle Motor Kit (Black)
- High Performance: Comes with a 2-stroke 50cc bicycle engine kit, designed for 26" or 28" bikes, ideal for upgrading regular bikes to electric bikes, this reliable and durable engine motor kit will help speed your bicycle up to 30 km/h, allowing you to enjoy the soaring pleasure of riding.
- High Quality Components: In motor engine kit you will get cylinder top end, U-mount kit, brake lever, 44T rear sprocket, fuel tank, kill switch, carburetor and other necessary parts, we make sure all our manufacturers comply Strict quality control guarantee measures and use the highest quality materials, high quality components, durable.
- Fuel Efficiency: 2 Stroke engine kit is very affordable and fuel efficient, 124 – 155 miles per gallon, rated power: 1.15Kw/5000r/min (1.6hp/5000r/min), max power: 1.6Kw/6000r/min (3hp /6000r/min), fuel type: No. 90, lubricating oil: two-stroke gasoline engine oil (or 10W/40.10W/30 oil), fuel and oil mixing ratio: new group 16:1, 20:1 after running 500km.
- Complete Installation Guide: Every bike engine kit comes with an easy-to-understand installation guide that walks you through the step-by-step installation, tuning and fueling of your brand new engine kit for the rest of your life.
- Product Service: 50cc 2-Stroke high-power engine bic....
Check Stock