Reviews Straighting Cutting Machine

Hard and Soft Teeth Tooth Aligners Trays Straightener Retainer 2pcs with Storage Box

  • Factory directly ---- high quality, We use the eating level material to make eco friendly Braces.
  • Full kit--- stage 1 soft + stage 2 hard kits, for full straighting process.
  • Beautiful package--- With storage box , high quality,beautiful manual.
  • Usage---- use the blue one firstly, Keep using it when you are free , after about 1 month ,then change to the harder one.
  • Function----for home personal care, Suitable for adult and chiild, Suitable for almost all kinds of teeth.
Check Stock

Cricut Variety Pack(1 StrongGrip, 1 LightGrip, 1 StandardGrip) Adhesive Cutting Mat 12

  • Works with the Cricut explore machine, Cricut expression machine, and Cricut expression 2 machine.
  • One 12" x 12" standard grip adhesive cutting mat, one 12" x 12" light grip adhesive cutting mat, and one 12" x 12" strong grip adhesive cutting mat.
  • Recommended materials for standard grip adhesive cutting mat: cardstock, pattern paper, embossed cardstock, iron-on, and vinyl.
  • Recommended materials for light grip adhesive cutting mat: printer paper, thin cardstock, vellum, construction paper, and vinyl.
  • Works with the Cricut Explore machine, Cricut Expression machine, and Cricut Expression 2 machine.
  • One 12" x 12" StandardGrip adhesive cutting mat, one 12" x 12" LightGrip adhesive cutting mat, and one 12" x 12" StrongGrip adhesive cutting mat.
  • Recommended materials for StandardGrip adhesive cutting mat: Cardstock, Pattern paper, Embossed cardstock, Iron-on, and Vinyl.
  • Recommended materials for LightGrip adhesive cutting mat: Printer paper, Thin cardstock, Vellum, Construction paper, and Vinyl.
  • Recommended materials for StrongGrip adhesive cutting mat: Thick cardstock, Glitter cardstock, Magnet material, chipboard, Poster board, and Fabric with stiffenerDescriptionCRICUT CUTTING MAT 12X12 VARITY 3 PACK.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Invisible Man

  • A small investment can make a huge improvement in the cutting performance of your machine.
  • Getting the best cutting performance from your Prestige Pro machine can be as simple as changing the PR standard cutting pad.
  • This PR Standard Cutting Pad measures 9 7/8" x 18"..
  • The many significant advantages of the extended length of this PVC vinyl Cutting Pad are an increased work surface, the ability to shuttle multiple dies through the machine for quicker cutting and for easy registration of ClearCrop Dies..
  • Cutting pads need replacement generally after 4-6 months.
Check Stock

Round Brush for Blow Drying, Ceramic Ion Thermal Barrel Brush, 4 Different-Sized Round Hair Brush and Curved Vented Boar Bristle Brush, Round Brush Set for Straightening, Add Volume & Shine

  • 100% pure natural boar bristle help to spread hair oil/sebum from the scalp to the tail of hair, when your hair is coated with sebum you’ll find the hair is generally more sheen, smooth, and manageable..
  • CREATE A SALON-STIYING: Create a salon-stlying:Our round brush for blow drying is best for hair curling or straighting with blow dryer. Professional salon level blowing out a fluffy or docile texture Hair style. Round hair brush set are perfect for all hair lengths and styles such as waves, curls, thick and fine hair.
  • as you blow your hair, Exactly what you need to achieve extra volume, springy curls and smooth hair..
  • ROUND BRUSH SET INCLUDES: Round hair brush x 4, curled vented paddle brush x 1, makeup bag x 1, hair clips for hair styling x2. Round brush set for women with ionic properties, perfect for creating all kinds of waves and volume, for easy to enjoy the salon quality at home without going out. We will provide intimate after-sales to ensure your shopping experience, you can buy with confidence..
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

We-buys Cutting Dies C Plate Replacement Adapter Mat Clear 5.9'×7.6'

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting.Plate thickness is 3mm.
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

OKVEQUIP 3PCS 4Inch Super Thin Diamond Saw Blade Dry or Wet Tile Ceramic Disc Wheel Porcelain Cutting Discs for Marble Quartz Granite

  • 【Tile Blade Widely Use】: Ceramic tile blade cutting discs can cut porcelain, vitrified tiles, ceramic tiles and thinner granite, marble, etc. quickly and accurately..
  • 【Features】: Diamond tile blade fast cutting, small kerf, low power consumption, sharp and wear-resistant,using hot pressing sintering process, can be used for a long time.
  • 【Applicable type】：Concrete cutting machine saw blade can be used for dry/wet cutting.
  • 【Adapted machine】: Cutting marble granite porcelain tile can be used with marble machine, desktop cutting machine, angle grinder.
  • 【Ceramic cutting disc wheel parameters】: size 105x20x10MM, outer diameter 105MM, inner diameter 20MM, with washer to change 16MM, thickness 1.2MM, RPM2000-8000.
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life.
  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A.
  • Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm.
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine.
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room.
Check Stock

Power Cord for Cricut Explore air 2 18V 3A AC Adapter Charger for Expression 2 Personal Expression Create Mini Cake Explore Cricut Maker Model KSAH1800250T1M2 Cutting Machine

  • T-Power - manufactured with Input Range: 100-240V , 18V~19V , MODEL: IVP1800-2500 , KSAH1800250T1M2, 05758 SDU40A ( ( Does not fit ( Cricut Joy ) ! )).
  • Compatible With: Cricut Cutting Personal Machine Expression, Expression 2, Original, Cake, Mini, Create Machine, / Provo Craft cricut 6x12 cutter....
  • Cricut Maker, Cricut Cutting Machine Explore Air 2, Expression, Expression 2, Original, Cake, Mini, Explore Air, Explore Air 2, Explore One, Create....
  • Cricut Maker, Cricut Cutting Machine Explore Air 2, Cricut Cutting Personal Machine Expression, Expression 2, Original, Cake, Mini, Create Machine,....
  • Used to Charge Models: Cricut Cutting Machine Explore Air 2, Expression, Expression 2, Original, Cake, Mini, Explore Air, Explore Air 2, Explore One,....
Check Stock

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

Sizzix Big Shot Foldaway Machine Only (Black) Inspired by Tim Holtz, Cutting and Embossing Machine, 665305

  • VERSATILE DIE CUTTING MACHINE – The Sizzix big Shot foldaway die-cutting machine features a cutting surface and handle that neatly fold away. Perfect for easy storage and creating on the go. This die-cutting and embossing machine is the perfect tool for a range of creative pursuits for everyone from the beginners to experts. Built in storage compartments keep your wafer-thin dies and favourites tools close to hand..
  • DIE CUTTING AND EMBOSSING –Perfect for paper craft, scrapbooking, home sewn projects, upcycling, card making and more..
  • MULTITUDE OF MATERIALS – Die-cuts and embosses many different materials up to 6 (15. 24 cm) wide. Compatible with the entire Sizzix product library including Big, Thinlits and Framelits dies and Textured Impressions, Texture Fades and Impresslits Embossing Folders (with the exception of Big Plus and Big Pro dies)..
  • INCLUDED COMPONENTS – Contents include 1 big Shot foldaway machine, 1 Platform, 1 thin die adapter, 1 pair of standard cutting pads, 1 instruction booklet..
  • MACHINE SIZE – 34.93cm x 33.02cm x 20.32cm.
Check Stock