Reviews Straight Line Chisels

Narex 853670 7 Piece Set of Richter Extra Bevel Edge Chisel (1/8, 1/4, 3/8, 1/2, 3/4, 1 and 1-1/2 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Wood Chisel Tool Set, 12pcs Woodworking Chisels Wood Carving Tools Trimming Down Wood Woodworking Lathe Gouges Tools with Roll-Up Carrying Case for Carpenter Craftsman,6mm (1/4\), 12mm (1/2\)

  • ... protect everything else in your toolbox from getting nicked or scratched..
  • 【Necessary Accessories】The whole set includes 1/2" wood chisel,1/4" wood chisel,1/4" round nose chisel,1/4" square wood chisel,1/4" skew wood chisel,1/4" diamond point chisel,1/4" curved chisel,1/4" "U" gouge,1/2" wood turning gouge,1/2" straight gouge,9/6" straight gouge,1/2" parting tool..
  • 【Wide Application】Woodworking Chisels is best use for wood carving, furniture carving, antique floor carving, bonsai carving, toys carving, figures carving, animals carving, etc.Professional engraving, amateur, students can use. Even if the fingers touch the blade vibration, it will not damage the cutting fingers..
Check Stock

Narex 6 Piece Richter Extra Bevel Edge Chisel Set (1/8, 1/4, 3/8, 1/2, 3/4 and 1) in 9 Pocket Canvas Tools Roll

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Narex Richter Extra Bevel Edge Chisel with Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrule (1/2 inch)

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Narex Richter Extra Bevel Edge Chisel with Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrule (3/4 inch)

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Narex Richter Extra Bevel Edge Chisel with Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrule (1/8 inch)

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Narex 853600 5 Piece Boxed Set of Richter Extra Bevel Edge Chisel (1/4, 3/8, 1/2, 3/4 and 1 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Narex 853654 4 Piece Set of Richter Extra Bevel Edge Chisel (1/4, 1/2, 3/4 and 1 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Narex 853653 3 Piece Dovetail Chisel Set of Richter Extra Bevel Edge Chisel (1/4, 3/8, and 1/2 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Narex 853655 5 Piece Set of Richter Extra Bevel Edge Chisel without Box (1/4, 3/8, 1/2, 3/4 and 1 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules

  • To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a fr....
Check Stock

Shaving Leather Strap, Men's Genuine Leather Strop Sharpening Barber Straight Razor Folding Knife Shave Sharpener Belt for Barber Male Shaving Tool

  • POLISHING THE PERFECT EDGE: The straight razor sharpening belt helps you to polish the razor, polish the perfect edge, make your razor sharper, and provide you with different experiences. We produced it wider for your convenience, which helps to keep your blade sharp and safer sharpening..
  • HOOK DESIGN: The razor sharpening straps are finely balanced to allow for an easy sharpening experience. The strop has a handle at the bottom and swivel hanging tab on the top end for ease use. Hanging hook with lobster clasp is convenient to fix during use, to get excellent grip, which is suitable for professional use. This is a very Humanization design.
  • LONG-LASTING & DURABLE: Genuine leather is durable, soft and stylish. It is thick enough, not easy to snap. You can rest assured to buy this product. Used for final sharpening and smoothing after honing razors.Suitable for straight razors, sharpen knives and chisels..
  • MEET YOUR NEEDS: Suitable for straight razors, sharpen knives and chisels. Coarse and fine sides can meet your different needs, used for final sharpening and smoothing after honing razors. Easy to use, suitable for prof....
Check Stock

BeaverCraft Wood Carving V Gouge K12/02 Woodworking Hand Chisel Compact Wood Carving Knife for Beginners and Profi

  • Wood Carving Chisel Fine and Deep Line Carving: our wood carving chisel is going to be great for achieving fine details on your carving. Its form....
  • Wood Carving Chisel as a Palm Tool: the wood carving chisels we produce are not meant to be used with any type of mallet or hammer, they are....
  • Wood Carving Chisel Made in Europe: European quality is famous for its level and respectability, so we are here to support this statement. This wood....
  • Wood Carving Chisel High-Carbon Sharp Blade: our manufacturing can be proud of the high-carbon blade they have because it is one of the great reasons....
  • Wood Carving Chisels Ergonomic Ash Handle: it is very important for wood carving chisels to be comfortable and feel nice in your hand since you are....
Check Stock

Narex 6 Piece Set Carving Chisels straight skew, 2 straight gouges, straight bevel, V tool and veining tool 894720

  • This 6 piece carving set is manufactured by small tool maker in Czech Republic..
  • Set includes straight skew, 2 straight gouges, straight bevel, V tool and veining tool.
  • All chisels blades are made from hardened highly allowed Cr-Mn steel and heat treated to HRc 55.
  • Handles are oiled European beech with ergonomic octagonal cross section.
Check Stock