Reviews Straight Jack Bulkhead Clamp

DVI Coupler Female to Female Gender Changer Bulkhead Mount Adapter (Black Gold Plated)

  • Coupling of two DVI devices through a bulkhead.
  • Can be used as a coupler or a bulkhead mount adapter.
  • Gold plated contact pins to minimize signal loss.
  • Wired straight through for feed-thru applications.
  • Ultra Slim size moulded plastic construction.
Check Stock

KOOTNAS 2-Pack Solid Brass Bulkhead Fittings 1/4 NPT Taper Female 3/4 Straight Male Thread Brass Water Tank Connector with 4 Rubber Rings 4 Silicone Rings for Tank Body Wooden Barrels etc

  • 【Size】- Female thread: 1/4 NPT taper thread.
  • Male thread: 3/4 inch straight thread. Please confirm that our products are suitable for your project before buying..
  • 【Material】- Made of high quality brass. Durable, smooth and deep internal and external threads, rust proof, easy to connect. More reliable than aluminum or plastic materials..
  • 【Good Sealing 】- 2 pieces 1/4 NPT female x 3/4" straight male brass tank fittings with 4 rubber rings and 4 silicone rings, you can install the o-rings as needed, they can provide better sealing on both sides of the bulkhead without leakage..
  • 【Where Used】- Commonly used in the water barrels, water tank, self-made liquid storage bucket and other bulkhead sealing projects, etc..
  • 【What Can You Get】- 2 pieces brass bulkhead tank fittings with rubber and silicone rings, Friendly Customer Service. If you are not satisfied with this product, please don’t hesitate to contact us, we will supply 100% Money Back, ensure your no risking purchasing..
Check Stock

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
  • Bulkhead Fitting Type: Push In Straight Male Connector.
  • Body:Nickel Plated Brass Seal, O-Ring NBR.
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
  • Fluid Admitted: Air, Vacuum, Water (No Freezing).
  • Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check Stock

Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

  • 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5" TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
  • 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
  • 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
  • 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch triple clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
  • 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.
Check Stock

KINGDEE INC DVI Coupler Female to Female Gender Changer Bulkhead Mount Adapter Black Gold Plated 5 Pack

  • Coupling of two DVI devices through a bulkhead.
  • Can be used as a coupler or a bulkhead mount adapter.
  • Gold plated contact pins to minimize signal loss.
  • Wired straight through for feed-thru applications.
  • Ultra Slim size moulded plastic construction.
Check Stock

(2 pack)Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

  • 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
  • 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
  • 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
  • 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
  • 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.
Check Stock

A/C Hose Crimp Fitting Kit

  • Has everything you need to complete your custom A/C lines.
  • Includes enough hose and fitting for installations in applications without bulkhead fittings.
  • Fittings will need to be crimped at your local shop.
  • Kit includes (2) band clamps, (4) AN6 straight, (1) AN8 straight, (1) AN10 straight, (2) AN6 90 degree, (1) AN8 90 degree, (1) AN10 90 degree, (1) AN8....
Check Stock

Minimprover 4PCS 1/4 ID Hose Barb Thru-Bulk Head Hex Union Brass Straight Fitting with Flat Washer Gasket Water/Fuel/Air

  • ★ 【Material】: Solid Brass construction. Durable Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ 【SIZE】: 1/4" Hose Barb x 1/4" Hose Barb.Thru-Bulk Bulkhead Fittings is connect with 1/4" ID hose with the same size..
  • ★ 【Introduction】: Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable.Bulkhead union coupling for connecting two hoses with the same diameter in a straight run.Barbed fitting for a tight seal on hoses..
  • ★ 【Applications】: The fittings are fixed with 2 Gaskets and 1 fixed six corner, 1 movable six corner nuts form bulkhead tank function.Wide range of use: suitable for applications in water,fuel,air and etc..
  • ★ 【Package Include】: 4 Pack 1/4" to 1/4" hose barb.It comes with 1 year warranty..
Check Stock

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots 50 inch Clamp

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
Check Stock

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (36 inch Clamp)

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
Check Stock

Rac Performance 16AN Straight Bulkhead Fitting, 16AN Male to Male Straight Bulkhead Fuel Fitting Adapter, With 16AN Bulkhead Nut Aluminum (16AN, Black)

  • 16AN Male to Male Straight Bulkhead Flare Union Fitting Adapter With 16AN Bulkhead Nut Aluminum.
  • Made of High Performance Lightweight 6061-T6 billet aluminum material.
  • Black Anodized Finish for Durability and Strength.
  • Designed to ensure the reliability required in a high pressure steering system.
  • Perfect to apply in automotive, industrial, boat/marine etc.
Check Stock

Rac Performance 10AN Straight Bulkhead Fitting, 10AN Male to Male Straight Bulkhead Fuel Fitting Adapter, With 10AN Bulkhead Nut Aluminum (10AN, Black)

  • 10AN Male to Male Straight Bulkhead Flare Union Fitting Adapter With 10AN Bulkhead Nut Aluminum.
  • Made of High Performance Lightweight 6061-T6 billet aluminum material.
  • Black Anodized Finish for Durability and Strength.
  • Designed to ensure the reliability required in a high pressure steering system.
  • Perfect to apply in automotive, industrial, boat/marine etc.
Check Stock

ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots All 3 Clamps 24 36 and 50 inch

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
Check Stock